• 한국재료학회지
• /
• 제12권5호
• /
• pp.334-340
• /
• 2002

$TiO_2$-coated fly ash was synthesized by dropping method of coating agent in order to get $TiO_2$ coating layer with high photocatalytic activity on the surface of coal fly ash. The properties of the $TiO_2$ coating layer such as morphology, crystal structure, crystal size and photocatalytic activity were compared with those of the $TiO_2$-coated fly ash prepared by the traditional method of precipitation. $TiCl_4$ aqueous solution was used as a titanium stock solution and $NH_4HCO_3$ was used as a precipitant. The $TiO_2$ coating layer obtained by dropping method of coating agent was more uniform than that coated by precipitation. However, the crystal of $TiO_2$ coated by dropping method of coating agent was easy to grow by heat treatment because of the small primary particle size and bulky morphology, and its photocatalytic activity was consequently lower than that of the $TiO_2$ coated by precipitation. The $TiO_2$ coating layer obtained by both methods had a crystal structure of anatase, and the temperature of phase transformation into rutile was 90$0^{\circ}C$. The minimum crystal size of $TiO_2$ for the highest photocatalytic activity was found to be about 10nm.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.322-326
• /
• 2009

In this work, nanoporous $TiO_2$ powder was fabricated using Ketjen black, and applied in photovoltaic device based on the Dye-sensitized Solar Cells (DSCs). $TiO_2$ powder was fabricated using Ti-isopropoxide and 2-propanol by sol-gel combustion method. For added $0{\sim}2g$ variable of Ketjen black, characteristic of porosity, size of particle and crystallite of obtained $TiO_2$ nano powder was investigated. The photovoltaic efficiency of the prepared DSCs was measured using $TiO_2$ film which prepared on each different heat treatment temperature($100^{\circ}C{\sim}600^{\circ}C$) with paste of $TiO_2$ powder. The porosity and size in particle of $TiO_2$ powder made with Ketjen black Ig was influenced significantly effect to DSCs characteristic. Heat treatment at $500^{\circ}C$ makes the better photovoltaic efficiency which around 6.11%($J_{sc}=13.35mA/cm^2$, $V_{oc}=0.73V$, ff=0.63). The sol-gel combustion method was useful to DSCs fabrication.

• 청정기술
• /
• 제16권1호
• /
• pp.46-50
• /
• 2010

본 연구에서는 새집증후군의 대표적 원인물질인 수중 부유 톨루엔을 효율적으로 분해하기 위해 Sn원소를 티타니아 골격에 삽입하여 고온 고압에서 용매열(solvothermal)법으로 Sn-$TiO_2$ 나노 광촉매를 제조하였다. 제조한 Sn-$TiO_2$의 물리적 특성은 X-ray 회절분석법, 투과전자현미경, 주사전자현미경, 자외선-가시선 분광 광도계를 통하여 분석하였다. Sn-$TiO_2$의 광촉매 활성은 수중 부유 톨루엔 광분해반응을 통해 확인하였고, 반응 전후의 수중 부유 톨루엔 농도는 자외선-가시선 분광광도계를 이용하여 측정하였다. 수중 부유 톨루엔 광분해반응 결과 0.01 mol% Sn-$TiO_2$촉매가 순수 $TiO_2$ (anatase) 광촉매보다 활성이 향상되었으며. 500ppm 수중 부유 톨루엔은 300분 이내에 완전히 분해되었다.

• 한국재료학회지
• /
• 제17권3호
• /
• pp.125-131
• /
• 2007

[ $TiO_{2}-solution$ ] was aaded in $SiO_{2}-solution$ by various composition. $SiO_{2}-TiO_{2}$ thin films were obtained by the dip-coating method on the $SiO_{2}$ glass substrates, and then heat-treated at various temperature. Nano-size $TiO_{2}$ particles dispersed $SiO_{2}-TiO_{2}$ films showed absorption peak by quantum size effect at short wavelength region $350{\sim}400nm$, which made them good candidates for non-linear optical materials and photo-catalytic materials. The thickness of $SiO_{2}-TiO_{2}$ films were $300{\sim}430nm$. The contact angle of $SiO_{2}-TiO_{2}$ films for water was $5.3{\sim}47.9^{\circ}$, and therefore it is clear that $SiO_{2}-TiO_{2}$ films have super hydrophilic properties and the self-cleaning effects.

• 한국결정성장학회지
• /
• 제1권1호
• /
• pp.107-116
• /
• 1991

초음파 진동자를 사용 분무 열분해시켜 $Pb(NO_3)_2$와 $TiO(NO_3)_2$ 용액으로부터 $PbTiO_3$ 미분말을 합성하고 미립자의 특성을 조사하였다. 또한 미립자 형성과정을 같은 방법으로 합성되어 문헌에 보고된 $BaTiO_3$, $ZrO_2$, ZnO 등의 미립자 형성과정과 비교 검토하였다.

• 한국세라믹학회지
• /
• 제39권2호
• /
• pp.153-158
• /
• 2002

습식법에 의하여 제조된 $Al_2O_3$-1∼11 wt% $TiO_2$계 복합체를 1350$^{\circ}C$, 1450$^{\circ}C$ 에서 2시간 열처리 한 후 이에 대한 기계적 물성변화 및 미세구조를 조사하였다. 그 결과, $TiO_2$ 첨가량이 3 wt%였을 때의 복합체가 bulk density도 높고 기공율도 낮은 치밀한 미세구조를 이루었으며 이 때 young's modulus는 35.5 GPa, 곡강도값은 68.7 MPa로서 다른 $TiO_2$ 첨가량에 비하여 우수한 물성을 나타내었다. $TiO_2$ 첨가량이 증가할 수록 많은 양의 aluminium titanate의 합성으로 인해 열팽창 계수는 낮은 값을 나타내었다.

• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.495-502
• /
• 2012

본 연구에서는 $TiO_2$ 입자를 얻을 수 있는 침전법을 이용하여 $TiO_2$ 입자를 제조하였다. $TiO_2$ 입자 제조시 사용되는 알콜 용매의 종류와 온도 변화 등의 매개변수가 $TiO_2$ 입자의 결정 구조, 입자의 크기 및 형태에 미치는 영향을 조사하였다. $TiO_2$ 입자제조시 용매로 사용한 알콜 종류인 methyl alcohol, iso-propylalcohol, 그리고 tert-butylalcohol를 scanning electron microscope(SEM) 분석한 결과 iso-propylalcohol이 가장 좋은 결과를 가져왔다. 그리고 온도 변화를 열분석법을 사용한 결과 $200^{\circ}C$에서 $500^{\circ}C$까지는 아나타제 구조를 유지하였으나, $800^{\circ}C$에서는 루틸 구조로 전환되었다.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2624-2630
• /
• 2002

Organic/inorganic hybrid materials have rapidly become a fascinating research field. In this study, $polyimide/TiO_2$ composites were synthesized from nano-sized anatase $TiO_2$ and two types of polyimide, that is, BPDA-PPD and PMDA-ODA. Nano-sized $TiO_2$ particles were prepared from $TiOEt_4$ solution by the sol-gel method. The synthesized PI/$TiO_2$ composites were characterized by using XRD, TGA, FT-IR, TEM, and Atomic Force Microscope(AFM). $TiO_2$ particles were dispersed well in polyimides and the mechanical and thermal stability of polyimide was improved with $TiO_2$ nano particles.

• 공업화학
• /
• 제25권6호
• /
• pp.645-647
• /
• 2014

본 연구에서는 수열합성법을 이용하여, 한단계의 과정으로 $TiO_2$와 Ru (Ruthenium)가 도입된 $TiO_2$ ($Ru_x/TiO_2$)를 합성하였다. 합성된 샘플의 결정성과 조성 및 형태를 X-ray diffraction (XRD)과 energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM)를 통하여 확인하였으며, Benzyl alcohol의 Benzaldehyde로의 산화반응에 촉매로서 적용하였다. 높은 선택성을 가지는 산화반응이 진행되었으며, $TiO_2$에 도입된 Ru의 양이 증가할수록 촉매로서의 더 좋은 촉매활성을 보였다.

• 한국세라믹학회지
• /
• 제21권2호
• /
• pp.165-173
• /
• 1984

It is desirable to establish reliable synthetic methods for electro-ceramic materials. To synthesize $SrTiO_3$ in this study direct solid state reactions and wet chemical processes were used. Previous study of $SrTiO_3$ synthesis included oxalated-method($SrTiO(C_2O_4)_2$.$4H_2O$) co-precipitation$(SrCO_3+TiO(OH)_2)$ and direct solid state reaction$(SrCO_3+TiO(OH)_2)$ The methods in question lead to intermediate inclusion during the reactions and less controllable in particle sizes of $SrTiO_3$. To obtain highly pure $SrTiO_3$ so-called "direct wet process method" was added in this investigation. In the study the "direct wet process" was for the first time applied to synthesize chemically pure and fine particle $SrTiO_3$. $SrCl_2$ and $TiCl_4$<\ulcornerTEX> at KOH solution at room temperature to 10$0^{\circ}C$ precipitated $SrTiO_3$ The particle size increased as temperature increased.mperature increased.