• Journal of Sensor Science and Technology
• /
• v.5 no.3
• /
• pp.87-92
• /
• 1996

The PLT thin films on (100) cleaved MgO single crystal substrate have been fabricated by rf magnetron sputtering using a PbO-rich target. The dependence of physical and electrical properties on the degree of c-axis orientation has been studied. The degree of c-axis orientation of PLT thin films depends on fabrication conditions. Fabrication conditions of the PLT thin films were such that substrate temperature, working pressure, gas ratio of $Ar/O_{2}$, and rf power density were $640^{\circ}C$, 10 mTorr, 10 seem, and $1.7\;W/cm^{2}$, respectively. In these conditions, the PLT thin film showed the Pb/Ti ratio of 1/2 at the surface, the resistivity of $8{\times}10^{11}{\Omega}{\cdot}cm$, and dielectric constant of 110. The pyroelectric infrared sensors with these PLT thin films showed the peak to peak voltage of 450 m V and signal to noise ratio of 7.2.

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.300-306
• /
• 2014

In this study, we investigated the noble metal catalysts for HCHO removal at room temperature. These catalysts were characterized by XRD, FT-IR, CO-chemisorption. As a result, Pt and Pd based catalysts prepared by the reduction treatment showed the superior HCHO oxidation ability at room temperature. When the catalysts were prepared using $TiO_2$ support, which is well known as the reducing support, showed the superior activity. Also, the activity decreased by the agglomeration of active metal with increasing the reduction time. In case of reduction catalysts, it has been confirmed that the desorption and adsorption ability properties of HCHO is excellent at room temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.124.2-124.2
• /
• 2015

최근 에너지 효율을 향상시키고 감성과 기능성을 동시에 만족시킬 수 있는 스마트 윈도우 (Smart Window) 기술이 큰 주목을 받고 있다. 신개념의 하이브리드형 열선차단 코팅기술로 고투명, 고단열 등 복합기능을 가지고 있음. 4계절 변화가 뚜렷한 대한민국 실정에 가장 적합하여 건축물의 냉 난방 에너지를 최소화하는데 크게 기여할 것으로 기대된다. 단열필름 제조 방식에는 보급형 필름으로 염료 방식, 금속 방식 등이 있고 고성능 필름에는 나노 세라믹 방식과 스퍼터 방식+세라믹 방식을 융합한 필름(스퍼터 IR 필름)이 있다. 본 연구에서는 DC pulse sputter를 이용하여 고굴절율 물질인 TiO2와 저굴절률 물질인 SiO2를 적층으로 성장시켜 단열 스마트필름을 제작해 보았다. 높은 가시광 투과율과 IR 차페 성능을 확인하였고, 제작한 스마트필름을 또다른 윈도우 기술에 적용하는 연구를 진행하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.169-169
• /
• 2010

650nm 적외선 차단 필터를 Macleod 프로그램을 이용하여 설계하고, 이온보조증착(IAD) 장비를 이용하여 코팅한 후 투과도, 파장, 두께특성을 조사하였다. 차단필터의 증착물질은 $TiO_2$ (n=2.30) /$SiO_2$ (n=1.46) 을 사용하여 45층의 다층 박막으로 증착하였다. 코팅된 차단필터는 차단파장이 651 nm로써 평균 ${\pm}5$ nm 이내의 편차를 보였다. 420~630 nm 파장영역에서 평균 투과도는 89%이었으며, 투과도의 균일도는 약 2.12로써 매우 균일하였다. 투과도기 단파장 영역에서 감소된 것은 다층박막 증착 시 산소가 결핍된 것으로 판단된다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.227-232
• /
• 2004

Ballast water from ship harmful microorganism sterilized use of electrolytic sterilization system. The experimental methods were use of peristaltic flow pump upward on electrode pole. Due to reaction time, HRT were unlike microorganism on flow rate. In electrolysis, dioxide iridium coated titanium(Ti／IrO$_2$) and stainless steel plate were used for anode and cathode respectively. Current density controls make use of D.C Power supply on 250V 100Amper. Experimental use of current density between 0.1 and 0.5A was able to disinfect microorganism at 5 seconds by the reaction time. This study shows that the electrolyzed water has a potential for the sterilization of ballast water.

• Journal of Sensor Science and Technology
• /
• v.5 no.1
• /
• pp.1-8
• /
• 1996

High-sensitive pyroelectric infrared sensors have been fabricated with La-modified $PbTiO_{3}$(PLT) thin plates. The PLT thin plates have the composition of $(Pb_{0.9}La_{0.1}Ti_{0.75}O_{3})_{0.75}(PbO)_{0.25}$. Thickness of the thin plates is $100\;{\mu}m$. Top side electrodes exposed to IR are vacuum evaporated Ni-Cr, and bottom side electrodes are Ag. Each one takes the area of $1{\times}2\;mm^{2}$. The thin plates have a large resistivity of $6.41{\times}10^{10}{\Omega}{\cdot}cm$ and a relative dielectric constant of 341. They have a high figure of merit of $4.0{\times}10^{-11}\;Ccm/J$ due to its high pyroelectric coefficient of $4.45{\times}10^{-8}\;C/cm^{2}K$. The sensors show such a large voltage responsivity as 2501 V/W. That they can find practical applications like the pyroelectric infrared detectors.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.172-176
• /
• 2009

The nature and morphology of titanium dioxide films play a significant role in determining the overall efficiency of dye-sensitized solar cell (DSSCs). In this work, the preparation of nanostructured titania particles by sol-gel method (SG-$TiO_2$) and its characterization were investigated for the application of DSSCs. The samples were characterized by XRD, XPS, FE-SEM, BET and FT-IR analysis. The energy conversion efficiency of SG-$TiO_2$ was approximately 8.3 % under illumination with AM 1.5 (100 mW/$cm^2$) simulated sunlight. DSSCs made of SG-$TiO_2$ nanocrystalline films as photoanodes achieved better energy conversion efficiency compared to those prepared using commercially available Degussa P25.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.405-410
• /
• 2020

In this study, the following results were obtained by analysis of electric properties with FT-IR, DSC, XRD, and SEM, in the range of temperature 30~160℃ and frequency 0.1~200 kHz, when filling agent (0~100 phr) and silicone oil (0~12 phr) were added to raw silicone rubber. In the case of 100 phr mixed samples, the relative dielectric constant εr gradually decreased from 4.3 to 3.96 as frequency increased, and the dielectric loss tan δ decreased to 0.01 at 300 Hz, then increased to 0.022 at 30 kHz, then decreased to 200 kHz. The FT-IR analysis identified the same binding structure according to the chemical composition of added silica (SiO₂). Through DSC analysis, we could determine the change of heat quantity and the glass transition temperature of each specimen. In the XRD analysis, it was found that the images SiO₂, TiO₂, and Fe₂O₃ appeared for specimens with 0%, 50% and 100% filling agent. Finally, the SEM analysis confirmed that particles of 0.5 to 1.5 ㎛ size with silica (SiO₂) mixing were dispersed evenly.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.637-642
• /
• 1996

Preparation and properties of potential CVD (Chemical Vapor Deposition) precursors for the TiO2, a major component of the perovskite materials such as PT, PLT, PZT, and PLZT were investigated. Reactions between β-diketones and TiMe3, formed in situ failed to produce stable Ti(β-diketonate)3 complexes but a stable purple solid, characterized as (OTi(BPP)2)2 (BPP=1,3-biphenyl-1,3-propanedione) was obtained when BPP was used. Several new Ti(Oi-Pr)2(β-diketonate)2 complexes with aromatic or ring substituents were synthesized by the substitution reaction of Ti(OiPr)4by β-diketones and characterized with 1H NMR, IR, ICP, and TGA. Solid complexes such as Ti(Oi-Pr)2(BAC)2 (BAC=1.-phenyl-2,4-pentanedione), Ti(Oi-Pr)2(BPP)2, Ti(Oi-Pr)2(1-HAN)2 (1-HAN=2-hydroxy-1-acetonaphthone), Ti(Oi-Pr)2(2-HAN)2 (2-HAN=1-hydroxy-2-acetonaphthone), Ti(Oi-Pr)2(ACCP)2 (ACCP=2-acetylcyclopentanone), and Ti(Oi-Pr)2(HBP)2 (HBP=2-hydroxybenzophenone) were found to be stable toward moisture and air. Ti(Oi-Pr)2(ACCP)2 and Ti(Oi-Pr)2(HBP)2 were proved to have lower melting points and higher decomposition temperatures. However, these complexes are thermally stable and pyrolysis under an inert atmosphere resulted in incomplete decomposition. Ti(Oi-Pr)2(DPM)2 (DPM=dipivaloylmethane) and Ti(Oi-Pr)2(HFAA)2 (HFAA=hexafluoroacetylacetone) were sublimed substantially during the thermal decomposition. Pyrolysis mechanism of these complexes are dependent on type of β-diketone but removal of Oi-Pr ligands occurs before the decomposition of β-diketonate ligands.

• Clean Technology
• /
• v.26 no.1
• /
• pp.7-12
• /
• 2020

Ti-SBA-15 catalysts doped with lanthanide ions (Ln/Ti-SBA-15) were successfully synthesized using conventional hydrothermal method. In addition, they were characterized by XRD, FT-IR, DRS, BET, and PL. The activity of these materials on the photocatalytic decomposition of methylene blue under ultraviolet light irradiation was also examined. Ti-SBA-15 catalysts doped with various lanthanide ions maintained their mesoporous structure. The pore size and pore volume of Ln/Ti-SBA-15 materials decreased but their surface area increased upon the doping of lanthanide ion. Ln/Ti-SBA-15 materials exhibited the type IV nitrogen isotherm with desorption hysteresis loop type H2, which was characteristic of mesoporous materials. The size of hysteresis increased in the doping of lanthanide ions on Ti-SBA-15 material. There was no absorption in the visible region (> 400 nm) regardless of the doping of lanthanide ions to TiO₂ particles, while the broad bands at 220 nm appeared at the Ln/Ti-SBA-15 samples, indicating the framework incorporation of titanium into SBA-15. 1 mol% Pr/ Ti-SBA-15 catalysts showed the highest photocatalytic activity on the decomposition of methylene blue but the Ti-SBA-15 catalysts doped with Eu, Er, and Nd ions showed lower activity compared to pure Ti-SBA-15 catalyst. The PL peaks appeared at about 410 nm at all catalysts while the excitonic PL signal was proportional to the photocatalytic activity for the decomposition of methylene blue.