• Journal of the Korean Data and Information Science Society
• /
• v.25 no.4
• /
• pp.737-743
• /
• 2014

This experiment was conducted to compare heterogeneity for the variance in dairy cattle population and to induce homogeneity of variance using 502,228 performance test records of dairy cattle. The estimates of heritability for milk yields, fat yields and protein yields were 0.28, 0.26 and 0.24, respectively and the estimate of average breeding value by birth year was lower in HV (heterogenous variance) model than in animal model, collectively. The average breeding values of milk yields, fat yields and protein yields for 545 sire bulls applicable to the criteria of interbull MACE programme were 453.54kg, 10.75kg and 14.33kg, respectively and when the heterogeneity was adjusted they were 432.06kg, 10.15kg and 13.40kg, respectively, which were lower in all milk traits collectively. In animal model, coefficients of phenotypic correlation between dataset I and II were 0.839 in milk yields, 0.821 in fat yields, and 0.837 in protein yields, while in HV model, they were 0.841 in milk yields, 0.820 in fat yields, and 0.836 in protein yields, showing similar results in 2 models. When compared using animal model and HV model, the regression coefficient for ratio of number of daughters by calving year of milk yields increased from 15.157 to 16.105 and that of fat yields increased from =0.227 to =0.196, but that of protein yields decreased from 0.630 to 0.586.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.951-953
• /
• 2015

Learning for thinking says the behavior of the organism changes as a result of practice or experience. It is very difficult to identify focusing ability objectively when students study. But, brain of the body is not so. EEG signal means continuously electric records of brain potential variation between two points on the scalp when brain activities take place. In types of EEG, there are delta(0~4Hz), theta(4~8Hz), alpha(8~13Hz), beta(13~30Hz) and gamma waves(30~50Hz). SMR waves and Mid-beta waves appear when focused for studying. Part for the most influence on concentrating reported that Mid-beta waves. In relation to brain activities, EEG has been actively researched for evaluating brain focus index system during learning and study. So, By using Biopac system for this study, measured brain wave was converted into FFT for extracting Mid-beta domain signals that are related to learning after giving focus invoked subjects to a small number of people. When concentrating, we measured the change in the power of the Mid-beta frequency domain and presented a correlation. Based on these results, we analyzed whether students are concentrated objectively on learning or not. and hope to offer more efficient learning method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.509-515
• /
• 2012

In this study, ${\gamma}-Al_2O_3$ nanoparticles were synthesized by using coflow hydrogen diffusion flames. The synthesis conditions were varied with using several oxygen concentrations in the oxidizing air. The particle characteristics of the flame-synthesized $Al_2O_3$ nanoparticles were determined by examining the crystalline structure, shape, and specific surface area of the nanoparticles. The measured maximum centerline temperature of the flames ranged from 1507.8 K to 1998.7 K. The morphology and crystal structure of the $Al_2O_3$ nanoparticles were determined from SEM images and XRD analyses, respectively. The particle sizes were calculated from measured BET specific surface areas and ranged from 25 nm to 52 nm. From XRD analyses, it was inferred that a large number of the synthesized nanoparticles were ${\gamma}-Al_2O_3$ nanoparticles including ${\theta}-Al_2O_3$ nanoparticles.

• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.52-57
• /
• 2015

The focal spot of electron beam depending on the anode angle in the structure and major parts of the X-ray tube was investigated by the OPERA-3D/SCALAR simulation program. The simulation worked on four spaces with with two spaces, including anode and cathode of X-ray tube, by applying the finite element method analysis. The analytical model and dimension for the emission orbit of thermal electrons made from one filament of the focused X-ray cathode is affected to the penumbra of detector for the X-ray depending on any real focal spot size. The model shape of focusing cap and focusing tube with an anode target angle and a cathode filament is analyzed by the current density distribution of thermal electrons. The focusing width of thermal electrons for the X-ray tube depended on the anode angle (${\theta}$). The focusing value of electron beams at a region of anode angle having $10^{\circ}{\sim}17^{\circ}$ maintained to below value of $70{\mu}m$. The minimum focal size of the electron beam was $40{\mu}m$ at an anode angle of $15^{\circ}$. The focused X-ray tube of many variables depended on the thermionic emission of hot electrons from the target trajectory. The focusing tube will contribute to the real design of X-ray for the development of future diagnosis medical device.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.3
• /
• pp.311-321
• /
• 2015

In this study, an experimental study to evaluate the seismic performance of beam-to-column connection for medium and low-rise building was conducted. Five connections using SHN490 steel were made with test variables such as flange welded or bolted, web welded or bolted. Specimen SHN-W-W is web welded and flange welded type. Specimen SHN-W-B is web welded and flange bolted type. Specimen SHN-B-W is web bolted and flange welded type. Specimen SHN-B-B is web bolted and flange bolted type. Specimen SHN-EP is a connection with the end plate to the beam ends. Cyclic loadings was applied at the tip of beam following KBC2009 load protocol. The load vs rotation curves for different connection are shown and final failure mode shapes are summarized. The connections are classified in terms of stiffness and strength as semi-rigid or rigid connection. Energy dissipation capacities for seismic performance evaluation were compared.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.1
• /
• pp.54-60
• /
• 1999

Antheraea pernyi silk powder was prepared by treatment with HCl and NaOH. The degree of hydrolysis of Antheraea pernyi silk fiber was examined. The morphology and structural characteristics of Antheraea pernyi silk powder were investigated by using SEM, FTIR and X-ray diffractometer. As the concentration of HCl and NaOH and tratment temperature increased, in general, the degree of hydrolysis of Antheraea pernyi silk fiber increased. On the other hand, the degree of hydrolysis of Antheraea pernyi treated with 3 N NaOH at 120$^{\circ}C$ for 24 hr was 70 wt%, which was lower than that of 90$^{\circ}C$(83 wt%). The morphology of acid/alkali resistance fraction of Antheraea pernyi silk fibroin was transformed from fiber form to powered one with an increase of hydrolysis. The conformation of Antheraea pernyi silk powder characterized by FT-IR spectrometer and X-ray diffractometer ${\beta}$-sheet and ${\alpha}$-helix structure.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.4
• /
• pp.595-604
• /
• 2006

The growth characteristics of Commercially Developed Nitrifying Bacteria (CDNB) were studied in laboratoryscale. CDNB, a pure, artificially isolated bacterium, was cultivated to produce Cultivated Nitrifying Bacterium Group (CNBG). The average ammonia removal rate of CDNB was 0.0234g $NH_4^+-N/g$ MLSS/hr. CNBG was produced in the batch reactor and Specific Nitrification Rate (SNR) was determined at 0.0107g $NH_4^+-N/g$ MLSS/hr. The SNR of CNBG was lower than the SNR of CDNB because the diverse and multi-cultured microbial growth took place during cultivation. The effect of the temperatures and the mixing ratios of sewage and culture solution on the SNR of CNBG was studied. The SNR of CNBG, 0.0107g $NH_4^+-N/g$ MLSS/hr at $27^{\circ}C$, decreased to 0.0048g $NH_4^+-N/g$ MLSS/hr at $15^{\circ}C$, and temperature coefficient (${\Theta}$) was calculated to be 1.07. With the varied sewage mixing ratios, the SNR of CNBG remained unchanged. Activated sludge reactors maintaining an MLSS of 2,000mg/L at HRT of 4 h were operated under conditions in which dosage of Concentrated CNBG Solution (CCNBGS, 10,000mg MLSS/L) and application method of CNBG were varied. The reactor with 20mL of CCNBGS took shorter time to oxidize $NH_4^+-N$ reaching 1mg/L than the reactor with 5mL of CCNBGS showing that higher dosages were associated with greater mass removal of $NH_4^+-N$. However, the total removal was not great. In terms of different methods of CNBG application, reactor seeded with 20mL of CCNBGS took 3days to reach 1mg/L of effluent ammonia concentration while reactor dosed with 20% (v/v) CNBG implanted media took 2days. Both the control reactor and the reactor dosed with 20% (v/v) media only did not reach 1mg $NH_4^+-N/L$ after operating 18days. The reactor with CNBG implanted media had the highest $NH_4^+-N$ removal rate because of maintaining high concentration of Nitrifying Oxidizing Bacteria (NOM), and is regarded as an appropriate method for the activated sludge process.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.293-299
• /
• 1998

We have investigated the atomic and electronic structures of Cu-adsorbed Si(100)-2$\times$1 surface, by using LEED and UPS. In the UPS spectra, the weak structures (peaks) related to Cu silicide appeared for low coverages less than 1.3 ML at room temperature, and the intensity of Cu 3d band rapidly increased with respect to Cu coverages. The Cu silicide peaks become clear after Cu deposition at room temperature followed by high temperature annealing ($\geq 300^{\circ}C$) or for Cu deposited surface at the substrate temperature of $400^{\circ}C$. On the other hand, these structures disappeared by annealing at $750^{\circ}C$. At very low coverage, a surface state near Fermi level $(E_F)$ was observed at $400^{\circ}C$. According to the rigid band model, it seems to be originated from the surface empty state occupied partially with Cu 4s electron. In the LEED patterns, no Cu-induced superstructure observed for RT-depositions and post annealing, while there were several surface structures which depend on substrate temperatures and coverages. we observed the clean surface 2$\times$1+2$\times$2 phase for 1.5 ML at $400^{\circ}C$, the clean surface 2$\times$1+5$\times$1 phase for 0.5 ML at $450^{\circ}C$ and the clean surface 2$\times$1+2$\times$2+5$\times$2+5$\times$5+10$\times$2 mixed phases for 3 ML at $450^{\circ}C$.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.6131-6136
• /
• 2014

Objective: Epidemiology studies have reported conflicting results between glutathione S-transferase Mu-1 (GSTM1), glutathione S-transferase theta-1 (GSTT1) and glutathione S-transferase pi-1 (GSTP1) and ovarian cancer (OC) susceptibility. In this study, an updated meta-analysis was applied to determine whether the deletion of GSTM1, GSTT1 and GSTP1 has an influence on OC susceptibility. Methods: A published literature search was performed through PubMed, Embase, Cochrane Library, and Science Citation Index Expanded database for articles published in English. Pooled odds ratios (ORs) and 95% confidence intervals (95%CIs) were calculated using random or fixed effects models. Heterogeneity between studies was assessed using the Cochrane Q test and $I^2$ statistics. Sub-group analysis was conducted to explore the sources of heterogeneity. Sensitivity analysis was employed to evaluate the respective influence of each study on the overall estimate. Results: In total, 10 published studies were included in the final analysis. The combined analysis revealed that there was no significant association between GSTM1 null genotype and OC risk (OR=1.01, 95%CI: 0.91-1.12). Additionally, there was no significant association between GSTT1 genetic polymorphisms and OC risk (OR=0.98, 95% CI: 0.85-1.13). Similalry, no significant associations were found concerning the GSTP1 rs1695 locus and OC risk. Meanwhile, subgroup analysis did not show a significant increase in eligible studies with low heterogeneity. However, sensitivity analysis, publication bias and cumulative analysis demonstrated the reliability and stability of the current meta-analysis. Conclusions: These findings suggest that GSTs genetic polymorphisms may not contribute to OC susceptibility. Large epidemiological studies with the combination of GSTM1 null, GSTT1 null and GSTP1 Ile105Val polymorphisms and more specific histological subtypes of OC are needed to prove our findings.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.115-115
• /
• 2010

고휘도 고효율 백색 LED (lighting emitting diode)가 차세대 조명광원으로 급부상하고 있다. 백색 LED를 생산하기 위한 공정에서 MOCVD (유기금속화학증착)장비를 이용한 에피웨이퍼공정은 에피층과 기판의 격자상수 차이와 열팽창계수차이로 인하여 생성되는 에피결함의 문제로 기판과 GaN 박막층 사이에 완충작용을 해줄 수 있는 버퍼층 (Buffer layer)을 만든다. 그 위에 InGaN/GaN MQW (Multi Quantum Well)공정을 하여 고휘도 고효율 백색 LED를 구현 할 수 있다. 이 공정에서 기판의 온도가 불균일해지면 wafer 파장 균일도가 나빠지므로 백색 LED의 yield가 떨어진다. 균일한 기판 온도를 갖기 위한 조건으로 기판과 induction heater의 간격, 가스의 흐름, 기판의 회전, 유도가열코일의 디자인 등이 장비의 설계 요소이다. 본 연구에서는 유도가열방식의 유도가열히터를 이용하여 기판과 히터의 간격에 차이에 따른 기판 균일도 측정했고, 회전에 의한 기판의 온도분포와 자기장분포의 실험적 결과를 상용화 유체역학 코드인 CFD-ACE+의 모델링 결과와 비교 했다. 또한 가스의 inlet위치에 따른 기판의 온도 균일도를 측정하였다. 본 연구에서 사용된 가열원은 유도가열히터 (Viewtong, VT-180C2)를 사용했고, 가열된 흑연판 표면의 온도를 2차원적으로 평가하기 위하여 적외선 열화상 카메라 (Fluke, Ti-10)를 이용하여 온도를 측정했다. 와전류에 의한 흑연판의 가열 현상을 누출 전계의 분포로 확인하기 위하여 Tektronix사의 A6302 probe와 TM502A amplifier를 사용했다. 흑연판 위에 1 cm2 간격으로 211곳에서 유도 전류를 측정했다. 유도전류는 벡터양이므로 $E{\theta}$를 측정했으며, 이때의 측정 방향은 흑연판의 원주방향이다. 또한 자기장에 의한 유도전류의 분포를 확인하기 위하여 KANETEC사의 TM-501을 이용하여 흑연판 중심으로부터 10 mm 간격으로 자기장을 측정 했다. 저항 가열 히터를 통하여 대류에 의한 온도 균일도를 평가한 결과 gap이 3 mm일때, 평균 온도 $166.5^{\circ}C$에서 불균일도 6.5%를 얻었으며, 회전에 의한 온도 균일도 측정 결과는 2.5 RPM일 때 평균온도 $163^{\circ}C$에서 5.5%의 불균일도를 확인했다. 또한 CFD-ACE+를 이용한 모델링 결과 자기장의 분포는 중심이 높은 분포를 나타냄을 확인했고, 기판의 온도분포는 중심으로부터 55 mm되는 곳에서 300 W/m3로 가장 높은 분포를 나타냈다. 가스 inlet 위치를 흑연판 중심으로 수직, 수평 방향으로 흘려주었을 때의 불균일도는 각각 10.5%, 8.0%로 수평 방향으로 가스를 흘려주었을 때 2.5% 온도 균일도 향상을 확인했다.