• 한국전자파학회논문지
• /
• 제25권5호
• /
• pp.491-503
• /
• 2014

본 논문에서는 모노폴과 같은 방사특성을 갖고 인체 표면 간 통신을 위한 $TM_{31}$ 고차 모드 반원-링 마이크로스트립 패치 안테나를 제안하였다. 제안된 안테나는 단락 핀을 이용하여 $TM_{31}$ 고차 공진 모드를 형성하였고, 평면형임에도 불구하고 모노폴과 같은 방사특성을 갖는다. 패치안테나의 좁은 대역폭을 확장하기 위해 $TM_{31}$ 모드 C-형 반링 패치를 반원 패치에 인접시켰으며, 소형화를 위해 half mode를 사용하였다. 인체 착용환경을 고려하여 마이크로스트립 라인을 이용하여 급전하였다. 제안된 안테나는 ISM(Industrial, Scientific, and Medical) 2.45 GHz 대역(2.4~2.485 GHz)에서 $0.25{\lambda}_0{\times}0.46{\lambda}_0{\times}0.025{\lambda}_0$의 크기를 갖고, 2.38~2.49 GHz에서 4.24 %의 10-dB 반사손실 대역폭을 갖는다. 인체의 영향을 고려하기 위해 2/3 근육-등가 반고체형 모의인체를 제작하고, 이를 이용하여 안테나에 미치는 인체의 영향을 분석, 검증하였다. 또한, 실제 인체 상황에서 제안된 안테나를 통해 인체 표면 간 링크의 통신 성능 분석을 위한 실험을 수행하였다.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.151-156
• /
• 2014

PURPOSE. To investigate the microtensile bond strength between two all-ceramic systems; lithium disilicate glass ceramic and zirconia core ceramics bonded with their corresponding glass veneers. MATERIALS AND METHODS. Blocks of core ceramics (IPS e.max$^{(R)}$ Press and Lava$^{TM}$ Frame) were fabricated and veneered with their corresponding glass veneers. The bilayered blocks were cut into microbars; 8 mm in length and $1mm^2$ in cross-sectional area (n = 30/group). Additionally, monolithic microbars of these two veneers (IPS e.max$^{(R)}$ Ceram and LavaTM Ceram; n = 30/group) were also prepared. The obtained microbars were tested in tension until fracture, and the fracture surfaces of the microbars were examined with fluorescent black light and scanning electron microscope (SEM) to identify the mode of failure. One-way ANOVA and the Dunnett's T3 test were performed to determine significant differences of the mean microtensile bond strength at a significance level of 0.05. RESULTS. The mean microtensile bond strength of IPS e.max$^{(R)}$ Press/IPS e.max$^{(R)}$ Ceram ($43.40{\pm}5.51$ MPa) was significantly greater than that of Lava$^{TM}$ Frame/Lava$^{TM}$ Ceram ($31.71{\pm}7.03$ MPa)(P<.001). Fluorescent black light and SEM analysis showed that most of the tested microbars failed cohesively in the veneer layer. Furthermore, the bond strength of Lava$^{TM}$ Frame/Lava$^{TM}$ Ceram was comparable to the tensile strength of monolithic glass veneer of Lava$^{TM}$ Ceram, while the bond strength of bilayered IPS e.max$^{(R)}$ Press/IPS e.max$^{(R)}$ Ceram was significantly greater than tensile strength of monolithic IPS e.max$^{(R)}$ Ceram. CONCLUSION. Because fracture site occurred mostly in the glass veneer and most failures were away from the interfacial zone, microtensile bond test may not be a suitable test for bonding integrity. Fracture mechanics approach such as fracture toughness of the interface may be more appropriate to represent the bonding quality between two materials.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.125-126
• /
• 2008

We investigate characteristics of gold and silver metal strip waveguides based on long range surface plasmon polaritons (LRSPPs) along thin metal strips embedded in a polymer for practical applications at the wavelengths of 1.31 and 1.55 um. Guiding properties of the metal strip waveguides are theoretically and experimentally evaluated. In addition, surrounding technologies such as the development of TM-mode laser, coupling properties, as well as high-speed digital signal transporting experiments will be explained for board-to-board optical interconnections by using the LRSPP waveguides.

• Composites Research
• /
• 제31권6호
• /
• pp.311-316
• /
• 2018

In the present study, the effect of GO in damping capacity of CF/epoxy laminates was studied via free vibration analysis. The composite laminates were manufactured by using vacuum assisted resin transfer molding technique. The damping properties of the prepared hybrid composites were determined in terms of natural frequency and damping ratio in free vibration test. The foremost aspire of this investigation was to compare the vibration properties i.e. natural frequency and modal damping of the prepared composites with the numerical results. The numerical study was carried out via FEA using $ANSYS^{TM}$ workbench software. The parametric study of the numerical models was also studied considering the beam free length and the beam thickness. It was found that the incorporation of GO enhanced the damping capacity of the composite and the variation of natural frequencies in mode1varied by 2-5% compared to the experimental study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집
• /
• pp.21-23
• /
• 2004

We report experimental results demonstrating a novel metal defined polymer optical waveguide with a low loss in electro-optic polymers for the first time. The polymer optical waveguides are created using a metal film on the top of upper cladding without any conventional etching process. The fabricated waveguides have an excellent lateral optical mode confinement at both 1.31 ${\square}m$ and 1.55 ${\square}m$ wavelength, resulting in a fiber-to lens optical insertion loss of ~ 7 dB at 1.55 ${\square}m$ and ~4.5 dB at 1.31 ${\square}m$ wavelength in a 3.5cm total length for TM polarizations, respectively. We also present the optical loss dependence of the waveguide as a function of optical wavelengths. These results may be used in the complex design of integrated polymer optical circuits that need simpler and cheaper fabrication process.

• Journal of Yeungnam Medical Science
• /
• 제17권1호
• /
• pp.55-65
• /
• 2000

VISX 엑시머레이저 굴절교정각막절제술의 경우 근시는 다영역 단연마법(Multi-zone, Single pass Ablation)으로, 근시성난시는 타원형 방식(Elliptical mode)에 의해 교정하는 원리를 채택하고 있다. VISX 20/20B $VisionKey^{TM}$ 엑시머레이저의 version 4.01 software를 이용하여 시술한 근시교정술(PRK)과 근시성난시교정술(PARK)의 임상성적에 차이가 있는지 알아보고자 하였다. 1995년 3월부터 1996년 12월까지 엑시머레이저 굴절교정각막절제술을 시행하고 술후 1년까지 경과관찰이 가능했던 PRK 152안, PARK 203안을 대상으로 후향적 연구를 시행하였다. 나안시력, 교정시력, 굴절력, 안압, 각막 혼탁, 각막지형도 등을 술후 1, 3, 6 및 12개월에 검사하였으며, 모든 환자는 12개월 이상 경과 관찰하였다. 술후 1년에 나안시력이 0.7 이상인 경우가 -7D 미만의 PRK군(110안)에서 94.8%, PARK군(104안)에서 88.1%이었고, -7D 이상의 PRK군(31안)에서 86.1%, PARK군(57안)에서 67.1%이었다. 예측도가 ${\pm}1D$ 이내인 경우가 PRK 및 PARK에 따라 -7D 미만에서 97.4%, 93,2%이었고, -7D이상에서는 각각 80.6%, 70.6%이었다. 본 연구에서 종전의 보고된 연구 결과들에 비해 나안시력 개선 및 예측도 등에서 상대적으로 우수한 성적을 나타내었음을 알 수 있었다. 대부분의 근시와 근시성난시는 VISX 20/20B $VisionKey^{TM}$ 엑시머레이저를 이용하여 효과적으로 치료할 수 있었고 PARK에서도 PRK와 유사한 정도의 우수한 성적을 얻었으나, PRK에 비해 보다 정확한 중심잡기와 축정렬 등의 중의가 요망된다. 향후 멕시머레이저와 소프트웨어의 발전에 의해 두 군 모두에서 성적향상을 기대할 수 있으리라 생각된다.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.103-109
• /
• 2006

This research is contents about output characteristic of optic current sensor that use faraday effect. optic current sensor used in an experiment is consisted of three parts.(1) Source of light used laser diode of 1310[nm].(2) Sensor section manufactured circularly according to gas insulated switchgear. And $9/125[{\mu}m]$ standard single mode optical fiber for communication was installed winding 20 [turn] on sensor section core surroundings of diameter 31 [cm].(3) Electrical signal of PD(Photo detector) is collected using NI company's 16bit DAQ board via terminal block. Collected data analyzed by different three signal processing methods. NI company's $Labview^{TM}$ was used to signal processing software. As a result, In signal processing of optic current sensor, we could know that noise greatly more influences the error generation than fluctuation of light intensity. also, 1 class CT(current transformer) manufacture that have error rate less than 1[%] was available by removing these