Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.164-164
/
2012
저진공 (>100 mTorr)에서 냉음극 변압기 전원 소스를 이용하여 플라즈마를 발생시키는 시스템을 개발하였다. 또한 이 장치를 이용하여 Tetraethylorthosilicate (TEOS)를 기화시켜 이산화규소 ($SiO_2$) 박막 증착 기술을 연구하였다. 공정 압력은 400~1,000 mT이었다. 증착된 박막의 박막 두께, 굴절률 등의 측정을 실시하였다. 결과를 요약하면, 플라즈마 공정 압력이 증가함에 따라 박막 증착 속도는 약 200~300 A/min이었다. 또한 전압이 1,100에서 2,100 V로 증가함에 따라 산화막의 증착 속도는 약 300에서 40 nm/min으로 증가하였다. TEOS만을 사용하였을 때 굴절률은 약 1.5~1.6정도였다. 그러나 TEOS에 산소를 추가하면 자연 산화막의 굴절률인 1.46을 쉽게 얻을 수 있었다. 초기 연구 결과를 정리하면 냉음극 변압기 플라즈마 장치는 향후 실용적인 산화막 플라즈마 증착 연구 장치로 사용될 수 있을 것으로 생각된다.
Kim, Su-In;Lee, Jae-Hun;Kim, Hong-Gi;Kim, Sang-Jin;Seo, Sang-Il;Hwang, Byeong-Hyeon;O, Sang-Ryong;Kim, Nam-Heon;Lee, Chang-U
Proceedings of the Korean Vacuum Society Conference
/
2015.08a
/
pp.176.1-176.1
/
2015
본 연구는 플라즈마 건식 식각 후 박막의 물성 특성 변화 측정에 Nano-Indentation 분석 기법을 도입하였으며, 식각 후 박막 표면 강도를 nano 영역에서 측정하여 박막 표면의 damage 분석에 적용하여 물리적인 해석을 시도하였다. 하지만 기판의 대면적화로 인하여 반도체 공정에 사용되는 기판은 300 mm로 증가하였고 이로 인하여 플라즈마 건식 식각에서 대면적에 대한 균일도 향상 연구를 진행 중에 있다. 이 연구에서는 플라즈마 건식 식각 후 박막의 균일도를 Nano-indenter 측정 결과를 기반으로 Weibull 분포 해석을 통하여 정량적인 균일도를 측정하고자 하였다. 플라즈마 건식 식각을 위하여 플라즈마 소스는 Adaptively Coupled Plasma (ACP)를 사용하였고 식각 후 TEOS $SiO_2$ 박막 표면을 분석하기 위하여, 시료 평면의 x, y 축에 대하여 각각 $20{\mu}m$로 indent 각 지점을 이격하여 동일한 측정 조건에서 Nano-indenter를 이용하여 박막 표면의 강도를 측정하였다. 측정된 결과는 Weibull 분포를 활용하여 정량화하였다. 결과에 의하면 플라즈마 소스의 bias 파워가 300 W 일 때 균일도가 가장 높은 29.84로 측정되었고, 150 W 일 때 가장 낮은 8.38로 측정되었다. 식각 전 TEOS $SiO_2$ 박막의 Weibull 분포에 의한 균일도가 17.93으로 측정됨을 기반으로 ACP 플라즈마 소스의 식각 조건에 따라 TEOS $SiO_2$ 박막의 균일도가 상대적으로 변함을 정량적으로 분석할 수 있었다.
A study on the particle growth in $TEOS/O_2$ plasma was performed by observing the particle size and its morphology by TEM. The qualitative chemical analysis of particles was also determined by the EDS (Energy Dispersive X-Ray Spectrometer). The effects of process variables such as the plasma on-time and bubbler temperature on the particle growth were investigated. The particle size becomes larger as the plasma on-time because of the longer coagulation, and also as the bubbler temperature increases because of the faster coagulation between particles.
A study on the particle growth in $TEOS/O_2$ plasma was performed, and particle size and its distribution was measured by the electrical aerosol analyzer (EAA), light scattering particle size analyzer and the particle size was also determined by SEM. The effects of process variables such as total gas flow rate, reactor pressure, supplied power and initial reactant concentration on the particle growth were investigated. From the EAA results, the particle size distribution is divided into three groups of the cluster size and the small and large size particles. The particle size distribution measured by the light scattering particle size analyzer becomes bimodal, because the cluster size particles smaller than 20 nm in diameter cannot be detected by the light scattering particle size analyzer. The size of particles measured by the light scattering particle size analyzer is in good agreements with those by the SEM. Also we could understand that the particle formation is very sensitive to the changes of reactor pressure and reactant concentration. As the total gas flow rate increases, the particle size decreases because of the shorter residence time. As the reactor pressure, or the reactant concentration increases, the particle concentration increases and the particles grow more quickly by the faster coagulation between particles.
Kim, Su-In;Lee, Jae-Hun;Kim, Hong-Gi;Kim, Sang-Jin;Seo, Sang-Il;Kim, Nam-Heon;Lee, Chang-U
Proceedings of the Korean Vacuum Society Conference
/
2015.08a
/
pp.177.1-177.1
/
2015
플라즈마 건식 식각공정은 반도체 공정에 있어 증착 및 세정 공정과 함께 중요한 공정중 하나이다. 기존 연구에서는 높은 식각 속도, 종횡비, 대면적에 대한 균일도 증가를 위하여 플라즈마 이온 밀도의 증가와 전자 온도를 감소시키기 위한 노력을 하고 있으며 플라즈마 식각분석 연구에서는 분광학 분석 기법을 활용하여 플라즈마에 의하여 활성화된 식각 가스와 박막 표면의 반응 메커니즘 연구가 진행 중에 있다. 그러나 지금까지의 플라즈마 식각연구에서는 플라즈마 식각 공정에서 발생되는 박막의 damage에 대한 연구는 전무하다. 본 연구에서는 플라즈마 식각과정에서 발생되는 박막 표면의 damage 연구를 위하여 Nano-indenter에 의한 분석 기법을 제시하였다. Nano-indentation 기법은 박막 표면을 indenter tip으로 직접 인가하여 박막 표면의 기계적 특성을 분석하고 이를 통하여 플라즈마에 의한 박막 표면의 물성 변화를 정량적으로 측정한다. 실험에서 플라즈마 소스는 Adaptively Coupled Plasma (ACP)를 사용하였고 식각 가스로는 HBr 가스를 주로 사용하였으며, 플라즈마 소스 파워는 1000 W로 고정 하였다. 연구 결과에 의하면 식각공정 챔버 내 압력이 5, 10, 15 및 20 mTorr로 증가함에 따라 TEOS SiO2 박막의 강도가 7.76, 8.55, 8.88 및 6.29 GPa로 변화되는 것을 측정하였고 bias power에 따라서도 다르게 측정됨을 확인하였다. 이 결과를 통하여 Nano-indentation 분석 기법을 활용하여 TEOS SiO2 박막의 식각공정의 변화에 따른 강도변화를 측정함으로써 플라즈마에 의한 박막 표면의 damage를 정량적으로 측정 가능함을 확인하였다.
Kim, Sun-Jae;Han, Sang-Myeon;Park, Joong-Hyun;Han, Min-Koo
Proceedings of the KIEE Conference
/
2006.10a
/
pp.71-72
/
2006
플라스틱 기판 위에 유도 결합 플라즈마 화학적 기상 증착장치 (Inductively Coupled Plasma Chemicai Vapor Deposition, ICP-CVD) 를 사용하여 실리콘 산화막 ($SiO_2$)을 증착하고, 엑시머레이저 어널링 (Excimer Laser Annealing, ELA) 과 $N_{2}O$ 플라즈마 전처리를 통해, 전기용량-전압(Capacitance-Voltage, C-V) 특성과 항복 전압장 (Breakdown Voltage Field) 과 같은 전기적 특성을 개선시켰다. 에너지 밀도 $250\;mJ/cm^2$ 의 엑시머 레이저 어닐링은 실리콘 산화막의 평탄 전압 (Flat Band Voltage) 을 0V에 가까이 이동시키고, 유효 산화 전하밀도 (Effective Oxide Charge Density)를 크게 감소시킨다. $N_{2}O$ 플라즈마 전처리를 통해 항복 전압장은 6MV/cm 에서 9 MV/cm 으로 향상된다. 엑시머 레이저 어닐링과 $N_{2}O$ 플라즈마 전처리를 통해 평탄 전압은 -9V 에서 -1.8V 로 향상되고, 유효 전하 밀도 (Effective Charge Density) 는 $400^{\circ}C$에서 TEOS 실리콘 산화막을 증착하는 경우의 유효 전하 밀도 수준까지 감소한다.
Proceedings of the Korean Vacuum Society Conference
/
2013.08a
/
pp.214.1-214.1
/
2013
Tetra-ethoxysilane (TEOS)은 일반적으로 저온 게이트 산화막의 원료 널리 이용되고 있으나 as-deposited 상태에서는 필수적으로 생성된 높은 계면밀도와 고정전하를 제거하기 위하여 수소계면처리, forming gas annealing 등 후처리 공정을 필수적으로 거처야만 한다. 즉 후처리 공정 없이도 일정수준의 계면밀도와 고정전하를 갖을 수 있는 출발물질이 제안되면 산업적 의미를 갖을 것이다. 본 연구에서는 TEOS를 대체할 수 있는 후보재료로써 Tetra-iso-propoxysilane (T-iso-POS)을 제안하였다. T-iso-POS는 iso 구조의 3차원적 특수 구조를 가지므로 더 쉽게 분해 될 수 있어 탄소의 결합을 억제 할 수 있다고 사료된다. 용량 결합형 PECVD (13.56 MHz) 장비를 이용하여 RCA 세정을 실시 한 p-Si (100) 기판위에 TEOS 혹은 T-iso-POS (2 sccm)와 O2를 도입(50 sccm), 플라즈마 전원(20~100 W), 압력(0.1~0.5 torr), 온도 ($170{\sim}400^{\circ}C$), 전극 간 거리 (1~4.5cm)의 조건 하에서 증착하였다. 얻어진 각각의 SiO2 막에 대해, 성장 속도, 2% BHF 용액보다 에칭 속도, IV 특성과 C-V 특성, FT-IR에 의해 화학구조 평가를 실시했다. T-iso-POS원료로 사용하여 TEOS보다 낮은 약 $200^{\circ}C$에서 증착 된 산화막에서 후 처리 없이도 10 MV/cm 이상의 절연 파괴 특성을 나타내는 우수한 게이트 절연막 제작에 성공했다. 그 성장 속도도 약 20 nm/min로 높았다.
Kim, Yoon-Hae;Lee, Seok-Kiu;Kim, Sun-Oo;Kim, Hyeong-Joon
Korean Journal of Materials Research
/
v.8
no.4
/
pp.317-322
/
1998
The stabilization of low dielectric constant SiOF films prepared by conventional PECVD using TEOS and $C_2F_6$ was evaluated by the $N_2O$-plasma post-deposition annealing. Properties of SiOF film became unstable when it was air-exposed or heat-treated. Water absorption of SiOF films was increased as F content was increased due to the for¬mation of F -Si- F bonds. Also F content of SiOF films decreased after heat treatment. $N_2O$-plasma post-deposition annealing was proved to be effective on stabilizing SiOF films. which was mainly due to the formation of thin SiON layer near the top surface of films. However. the value of dielectric constant was greatly increased again when $N_2O$-plasma post-deposition annealing was done for a long time. To stabilize the SiOF films without an increase of dielec¬tric constant by $N_2O$- plasma post-deposition annealing. the annealing time should be kept the minimum value. to which stabilizing effects against air environment and heat treatment were preserved.
Using a recently developed Hybric Plasma-Particle Accelerating Impact Deposition (HP-PAID) process, synthesis of nanostructured silicon coatings has been investigated by injecting vapor-phase TEOS (tetraethosysilane, (C$_2$H$\_$5/O)$_4$Si) into an Ar hybrid plasma. The plasma jet with reactants was expanded through nozzle into a deposition chamber, with the pressure dropping from 700 to 10 torr. Ultrafine particles accelerated in the free jet downstream of the nozzle, deposited by an inertial impaction onto a temperature controlled substrate. By using this process, nanostructured amorphous silicon coatings with grain size smaller than 10 nm could be synthesized. These samples were annealed in an Ar and crystallized at 900$^{\circ}C$ for 30 min. TEM analysis showed that the annealed coatings were also composed of nanoparticles smaller than 10 nm, which showed a good consistency that the average grain size of 7 nm was also estimated from a peak shift of 2.39 cm$\^$-1/ and Full Width at Half Maximum (FWHM) 5.92 cm$\^$-1/ of Raman analysis. The noteworthy is that a strong PL peak at 398 nm was also obtained for this sample, which indicates that the deposited coatings also contained 3∼4 nm nanostructured grains.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.