• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.449-453
• /
• 2007

Synthesis of Sn-GIC (Graphite intercalated compound) and its electrochemical characteristics were investigated to find a method for enhancing the performance of carbon anode of lithium ion battery. The content of Sn intercalated in graphite interlayer increased with increase of concentration of $SnCl_2$ solution and increase of the heat treatment temperature of dried graphite after dipped in $SnCl_2$ solution, respectively. And initial discharge capacity increased upon increase of intercalated Sn content. Sn-GIC with excellent electrochemical performance, which can be synthesized by heat treatment at $900^{\circ}C$ after dipped in 1.0 M $SnCl_2$ solution, showed 356 mAh/g of initial discharge capacity and 13% of capacity decay after 10 cycles.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.440-444
• /
• 2010

$SnO_2$ powders were prepared from the calcination of stannic acids precipitated from the aqueous solution of $SnCl_4$ with ammonium nitrate as a precipitator at $90^{\circ}C$. For the comparison of properties, the stannic acids were prepared from the homogeneous precipitation method using urea as a precipitator at the same temperature. The stannic acid from ammonium nitrate at a thermal gravity analysis showed the weight loss until $700^{\circ}C$ and the percentage of total weight loss was 16.5%. The crystallization of stannic acid into $SnO_2$ finished in the calcination at $600^{\circ}C$ for 2 h. The crystallite size of $SnO_2$ increased with the increase of calcination temperature and initial concentration of $SnCl_4$ solution. In case of the same calcination condition, $SnO_2$ prepared from homogeneous precipitation using urea had a relatively smaller crystallite size rather than $SnO_2$ prepared from ammonium nitrate.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.934-944
• /
• 1994

Effects of residual chloride on thermal decomposition behaviour of a-stannic acid and physical properties of $SnO_{2}$ powder were observed. The powder was fabricated by hydroxide method; $\alpha$-stannic acid was precipitated by mixing acqueous solutions of $SnCl_{4}$ and $NH_{4}$OH . The precipitate was washed with $NH_{4}NO_{3}$ solution while washing was controlled to be of three grades to modify its residual chloride content. The precipitate was dried at $1100^{\circ}C$ ~ 24h and calcined in air at $500^{\circ}C$ ~ $1100^{\circ}C$ for one hour. Thermal decomposition behaviour of $\alpha$-stannic acid was examined by a DT-TGA and a FTIR. Chemical composition and physical properties of $SnO_{2}$ powder were observed by an AES, a BET and a TEM, respectively. With a reduction in chloride content, the relative crystallite size of $SnO_{2}$ powder slightly increased by a low-temperature-calcining. However, at a high calcining temperature(T), the reverse relation occured. It was suggested that chloride ion replaces part of lattice oxygen site of a-stannic acid. Also, chloride ion on the site was suggested to retard de-hydration as well as crystalization at a low T while to promote crystal growth of $SnO_{2}$ by forming oxygen vacancy at a high T.

• Clean Technology
• /
• v.20 no.3
• /
• pp.269-276
• /
• 2014

This study was aimed to develop catalytic system for the dry-based reduction of oxidized mercury ($Hg^{2+}$) to elemental mercury ($Hg^0$) which is one of the most important components comprising mercury continuous emission monitoring system (Hg-CEMS). Based on the standard potential in oxidation-reduction reaction, transition metals including Fe, Cu, Ni and Co were selected as possible candidates for catalyst proceeding spontaneous reduction of $Hg^{2+}$ into $Hg^0$. These transition metal catalysts revealed high activity for reduction of $Hg^{2+}$ into $Hg^0$ in the absence of oxygen in reactant gases. However, their activities were greatly decreased in the presence of oxygen, which was attributed to the transformation of transition metals by oxygen to the corresponding transition metal oxides with less catalytic activity for the reduction of oxidized mercury. Hydrogen supplied to the reactant gases significantly enhanced $Hg^{2+}$ reduction activity even in the presence of oxygen. It might be due to occurrence of combustion reaction between $H_2$ and $O_2$ causing the consumption of $O_2$ at such high reaction temperature at which oxidized mercury reduction reaction took place. Because the system showed high activity for $Hg^{2+}$ reduction to $Hg^0$, which was compatible to that of wet-chemistry technology using $SnCl_2$ solution, the catalytic reduction system of Fe catalyst with the supply of $H_2$ could be employed as a commercial system for the reduction of oxidized mercury to elemental mercury.

• Clean Technology
• /
• v.28 no.1
• /
• pp.38-45
• /
• 2022

CuCl₂-loaded V₂O₅-WO₃/TiO₂ catalyst showed excellent activity in the catalytic oxidation of elemental mercury to oxidized mercury even under SCR condition in the presence of NH₃, which is well known to significantly inhibit the oxidation activity of elemental mercury by HCl. Moreover, it was confirmed that, when SO₂ was present in the reaction gas together with HCl, excellent elemental mercury oxidation activity was maintained even though CuCl₂ supported on the catalyst surface was converted to CuSO₄. This is thought to be because not only HCl but also the SO₄ component generated on the catalyst surface promotes the oxidation of elemental mercury. However, in the presence of SO₂, the total mercury balance before and after the catalytic reaction was not matched, especially as the concentration of SO₂ increased. In order to understand the cause of this, further studies are needed to investigate the effect of SO₂ in the SnCl₂ aqueous solution employed for mercury species analysis and the effect of sulfate ions generated on elemental mercury oxidation. It was confirmed that SO₂ also promotes NO_x removal activity, which is thought to be because the increase in acid sites by SO₄ generated on the catalyst surface by SO₂ facilitates NH₃ adsorption. The composition change and structure of the components present on the catalyst surface under various reaction conditions were measured by XRD and XRF. These measurement results were presented as a rational explanation for the results that SO₂ enhances the oxidation activity of elemental mercury and the NO_x removal activity in this catalyst system.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.464-470
• /
• 2006

Diblock copolymers consisting of methoxy Poly (ethylene glycol) (MPEG) and poly (${\epsilon}-ca$ prolactone) (PCL), poly(${\delta}-valerolactone$) (PVL), poly(L-lactide) (PLLA), or poly(L-lactide-co-glycolide) (PLGA) were prepared to compare the characterization of diblock copolymers as a drug carrier. MPEG-PCL, MPEG-PVL, MPEG-PLLA, and MPEG-PLGA diblock copolymers were synthesized by the ring-opening polymerization of ${\epsilon}$-caprolactone or ${\delta}$-valerolactone in the presence of $HCl{\cdot}Et_2O$ as a monomer activator at room temperature and by the ring-opening polymerization of L-lactide or a mixture of L-lactide and glycolide in the presence of stannous octoate at $130^{\circ}C$, respectively. The synthesized diblock copolymers were characterized with $^1H-NMR$, GPC, DSC, and XRD. The micellar characterization of MPEG-polyester diblock copolymers in an aqueous phase was carried out by using NMR, dynamic light scattering, AFM, and fluorescence techniques. Most micelles exhibited a spherical shape in AFM. Thus, ore confirmed that the micelles formed with MPEG-polyester diblock copolymers have possibility as a potential hydrophobic drug delivery vehicle because a hydrophobic drug could be preferentially distributed in the micelle core.