• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.634-638
• /
• 2004

Titanium silicalite-1 (TS-1) molecular sieve was produced by microwave heating of amorphous titanium-containing solid precursors after impregnation with aqueous TPAOH solution. $SiO_2-TiO_2$ xerogel, sub-micron sized $SiO_2-TiO_2$ prepared by thermal plasma process, and Ti-containing mesoporous silica, Ti-HMS, were tested as the solid phase substrates. Highly crystalline product was obtained within 30 min. after microwave irradiation with yields over 90% using $SiO_2-TiO_2$ xerogel, which showed essentially identical physicochemical properties to TS-1 prepared by conventional hydrothermal method. Excellent catalytic activity was also obtained for 1-hexene epoxidation using $H_2O_2.\;SiO_2-TiO_2$ particles prepared by thermal plasma and Ti-HMS were found inferior as a substrate for TS-1, probably due to difficulties in wetting the surface uniformly with TPAOH.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2288-2292
• /
• 2007

The catalytic activities of nickel-based catalysts were estimated for oxidizing acetaldehyde of VOCs exhausted from industrial facilities. The catalysts were prepared by sol-gel methods of SiO2 and SiO2-TiO2 as a xerogel followed by impregnating Al2O3 powder with the nickel nitrate precursor. The crystalline structure and catalytic properties for the catalysts were investigated by use of BET surface area, X-ray diffraction (XRD), Xray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR) techniques. These results show that nickel oxide is transformed to NiAl2O4 spinel structure at the calcination temperature of 400 °C in response to the steps with after- and co-impregnation of Al2O3 powder in sol-gel process. The NiAl2O4 could suppress the oxidation reaction of acetaldehyde by catalysts. The NiO is better dispersed on SiO2-TiO2/Al2O3 support than SiO2/Al2O3 and SiO2-TiO2-Al2O3 supports. From the testing results of catalytic activities for oxidation of acetaldehyde, Catalysts showed a big difference in conversion efficiencies with the way of the preparation of catalysts and the loading weight of nickel. The catalyst of 8 wt.% Ni/TiO2-SiO2/Al2O3 showed the best conversion efficiency on acetaldehyde oxidation with 100% conversion efficiency at 350 °C.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.142-146
• /
• 2008

Titanium silicalite-1 촉매를 $175^{\circ}C$에서 2일간 $SiO_2-TiO_2$ xerogel을 전구체로 사용하여 수열 합성하였고, 이를 이용하여 allylchloride(ALC) 에폭시화 반응의 속도론 인자를 도출하기 위해 반응온도 $25{\sim}55^{\circ}C$, ALC의 농도 0.2~3.0 M, 과산화수소의 농도 0.2~1.5 M 영역에서 촉매 반응실험을 수행하였다. 초기농도법을 이용하여 반응속도를 구한 후, power rate law, Eley-Rideal, 및 Langmuir-Hinshelwood 모델에 적용한 결과, 큰 차이는 없으나 power rate law에서 실험치와 예측치가 가장 우수하게 일치하였고, 이때 활성화 에너지는 29.7 kJ/mol, 과산화수소에 대한 반응차수는 0.41, ALC에 대한 반응차수는 0.52였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.101-102
• /
• 2006

금속을 도핑 함으로써 전기전도도가 향상될 것으로 생각되는 산화바나듐 나노선에 대하여 열처리 전후의 전기적 특성을 비교하였다. sol-gel 방법으로 만들어진 산화바나듐 xerogel($V_{1.66}Mo_{0.33}O_5{\cdot}nH_2O$)을 $Si_3N_4$ 절연막이 성장된 Si기판위에 분산시키고 Ti/Au으로 전극을 증착한 후 열처리 한 것과 하지 않은 두 시료의 전류-전압특성을 비교 분석하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.687-693
• /
• 2004

Composite membranes with a titania layer were prepared by soaking-rolling method with the titania sol of nanoparticles formed in the sol-gel process and investigated regarding the vapor permeation of various organic mixtures. The support modification was conducted by pressing $SiO_2$ xerogel of 500 nm in particle size under 10 MPa on the surface of a porous stainless steel (SUS) substrate and designed the multi-layered structure by coating the intermediate layer of ${\gamma}-Al_2O_3$. Microstructure of titania membrane was affected by heat-treatment and synthesis conditions of precursor sol, and titania formed at calcination temperature of 300$^{\circ}C$ with sol of [$H^+$]/[TIP]=0.3 possessed surface area of 210 $m^2$/g, average pore size of 1.25 nm. The titania composite membrane showed high $H_2/N_2$ selectivity and water/ethanol selectivity as 25-30 and 50-100, respectively. As a result of vapor permeation for water-alcohol and alcohol-alcohol mixture, titania composite membrane showed water-permselective and molecular-sieve permeation behavior. However, water/methanol selectivity of the membrane was very low because of chemical affinity of permeants for the membrane by similar physicochemical properties of water and methanol.