• Journal of Integrative Natural Science
• /
• v.2 no.2
• /
• pp.78-81
• /
• 2009

In recent years, organometallic polymer containing silane and silole unit has been a topic of interest because of the wide range of optical, electrical and luminescent properties. In previous work, we synthesized functionalsilanebridged[1]ferrocenophane from the reaction of dimethyldichlorosilane[Me2SiCl2] and diphenyldichlorosilane[Ph2SiCl2] and dichloromethylvinylsilane[C3H6SiCl2] with ferrocene$[Fe({\eta}-C5H4)2]$ and n-BuLi. In this work, we have synthesized Poly(ferrocenylsilane) via the Thermal Ring-Opening Polymerization(ROP). characteristics of the poly(ferrocenylsilane) were investigated by gel permeation chromatography(GPC), 1H- and 13C-NMR spectroscopy.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.253-259
• /
• 1998

Minerals of spring water in 47 sites of Chonnam were analyzed. Samples were collected 2 times, autumn and winter. The mineral concentrations (mean value) at maximum distribution rate were Ca 3.9, K 0.78, Na 7.4, Mg 0.7, Si 9.4, Ba 0.004, Ni 0.007, F 0.16, Cl 4.9, $SO_4$ 1.5, Fe 0.001, Zn 0.002 ppm, respectively. In case of Na, K, Ca, Mg, Si, Cl, Ba and Ni, the correlation coefficient was positive (p<0.05). K and O values were used as the indexes of healthy and delicious water. The K and O indexes of spring water which appeared to be good for health and deliciousness were 6.3 and 5.2, respectively. 98% of spring water in Chonnam appeared to be good for health and deliciousness.

• Macromolecular Research
• /
• v.8 no.5
• /
• pp.238-242
• /
• 2000

The new trisiloxane-bridged heterometallic dinuclear metallocenes, hexamethyltrisiloxanediyl(cyclopentadienyltitanium trichloride) (cyclopentadienylindenyl zirconium dichloride) , $C_3ITi-Cp(CH_3)_2Si-O-Si(CH_3)_2-O-Si(CH_3)_2-Cp-ZrIndCI_2$ (1) and hexamethyltrisiloxanediyl (cyclopentadienylindenylhafnium dichloride) (cyclopentadienylindenyl zirconium dichloride), $C_2IndHf-Cp(CH_3)_2Si-O-Si(CH_3)_2-Cp-ZrIndCl_2$ 2) connecting two dissimilar metallocenes were synthesized and used for ethylene polymerization in the presence of modified methylaluminoxane (MMAO) cocatalyst. The catalytic activity of heterometallic dinuclear metallocenes, 1 and 2 was lower than that of corresponding mononuclear metal-locene as well as two physically mixed catalysts, $CpTiCl_2/Cp_2ZrCl_2 and Cp_2HfCl_2/Cp_2ZrCl_2$. On the tither hand, MWD of PE obtained with 1 and 2 was remarkably broader ($M_w/M_n$) became up to 9.4) than those of PEs prepared with the corresponding mononuclear metallocenes and mixed catalysts. With analysis by GPC and CFC, it was found that PE produced by the heterometallic dinuclear metallocenes exhibited the definite bimodal GPC curves that should cause the broadening of MWD.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.583-588
• /
• 2010

Esterification of free fatty acid with methanol to biodiesel was investigated in a batch reactor using various solid acid catalysts, such as polymer cation-exchanged resins with sulfuric acid functional group(Amberlyst-15, Dowex 50Wx8), acidic ionic liquids (ILs)-modified silica gels respectively with $-SO_3H$ and $-SO_2Cl$ functional group ($SiO_2-[ASBI][HSO_4]$, $SiO_2-[ASCBI][HSO_4]$) and grafted silica gels respectively with $-SO_3H$ and $-SO_2Cl$ functional group ($SiO_2-R-SO_3H$, $SiO_2-R-SO_2Cl$). The effects of reaction time, temperature, reactant concentration(molar ratio of methanol to oleic acid), and catalyst amount were studied. Allylimidazolium-based ILs on modified silica gels were superior to other tested solid acid catalysts. Especially, the performance of $SiO_2-[ASBI][HSO_4]$ (immobilized by grafting of 3-allyl-1-(4-sulfobutyl)imidazolium hydrogen sulfate on silica gel) was better than that of a widely known Amberlyst-15 catalyst at the same reaction conditions. A high conversion yield of 96% was achieved in the esterification reaction of the simulated cooking oil at 353 K for 2 h. The high catalytic activity of $SiO_2-[ASBI][HSO_4]$ was attributed to the presence of strong Brønsted acid sites from the immobilized functional groups. The catalyst was recovered and the biodiesel product was separated by simple processes such as decantation and filtration.

• Resources Recycling
• /
• v.7 no.5
• /
• pp.52-57
• /
• 1998

Effect of Si in the electrochemical corrosion characteristics of Mg-Li-Al light alloy has been investigated by means of potentiodynamic polarization study. The elecrochemical behaviors were evaluated in 003% NaCl solution and the solution buffered with KH$_{2}PO_{5}{\cdot}$NaOH at room temperature. It was found that the addition of very small quantity of Si (0.48 wt%) in Mg-Li-Al light alloy increased corrosion rates and amount of corrosion products and decreated the pitting resistance of the alloy. From the results it was concluded that Si which is added to increase the strength of Mg-Li-Al alloy is harmful to corrosion properties of the alloy.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1570-1576
• /
• 1994

Effect of Na2O/SiO2 molar ratio, calcining temperature and addition of NaCl were investigated on the hydrothermal formation of X-type zeolite from the natural mordenite, which is a kind of rock deposited abundantly in kuryong po. Pulverized mordenite was first mixed with NaOH or NaOH-NaCl solution, and crystallized under hydrothermal condition at 90~10$0^{\circ}C$ for 10 hrs. Optimum condition for synthesis of the X-type zeolite were \circled1 the ratio Na2O/SiO2, NaCl/Al2O3 and H2O/Na2O:0.68, 11.4 and 40, respectively, \circled2 calcining temperature of starting materials: 90$0^{\circ}C$, \circled3 aging time: 48 hrs. and \circled4 crystallization temperature: 10$0^{\circ}C$. The yield of X-type zeolite under the optimum condition was about 55~60%, and the major crystallized X-type zeolite was faujasite phase. Zeolite of then type X was crystallized when NaCl was added to treating solution with in the limit 14.25 of NaCl/Al2O3 molar ratio. As the calcination temperature (from 50$0^{\circ}C$ to 95$0^{\circ}C$) of starting materials increases, yield of zeolite x increase.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.270-272
• /
• 1987

1,1-Dichloro-2,3,4,5-tetraphenyl-1-silacyclopenta- 2,4-diene was synthesized through the reaction of $SiCl_4$ with 1,4-dilithiotetraphenylbutadiene in 50% yield. From the reaction of this silole with metal, an air sensitive red-brownish solid was obtained. Treatment of this reaction product with $CH_3I\; and\; Me_3SiCl$ gave 1,1-dimethyl-2,3,4,5-tetraphenyl-1-silacyclopenta- 2,4-diene and 1,1-bis(trimethylsilyl)-2,3,4,5-tetraphenyl-1-silacyclopenta-2,4-diene, respectively. From these results, the formation of reactive 2,3,4,5-tetraphenyl-1-silacyclopenta-2,4-dienyl dianion was confirmed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.104.2-104
• /
• 1998

• Journal of Integrative Natural Science
• /
• v.2 no.1
• /
• pp.28-31
• /
• 2009

We describe the synthesis and characterization of silicon nanoparticles prepared by the soluton reduction of SiCl4. These reactions produce Si nanoparticles with surfaces that are covalently terminated. The resultant organic derivatized Si nanoparticles as well as a probable distribution of Water-soluble Si nanoparticles are observed and characterized by photoluminescence(PL) spectroscopy. This work focuses originally on the organic- and water-soluble silicon nanoparticles in terms of the photoluminescence. Further this work displays probably the first layout of hydrogen terminated Si nanoparticles synthesized in solution at room temperature.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.12
• /
• pp.1903-1907
• /
• 2008

Prodigiosin is a natural red pigment with algicidal activity against Cochlodinium polykrikoides, a major harmful red-tide microalga. To increase the yield of prodigiosin production by Hahella chejuensis KCTC 2396, significant medium components were determined using a two-level Plackett-Burman statistical design technique. Among 12 components included in basal medium, $NaHCO_3$, ${Na}_{2}{SiO}_{3}$, ${NH_4}{NO_3}$, ${Na}_{2}{SO}_{4}$ and $CaCl_2$ were determined to be important for prodigiosin production. The medium formulation was finally optimized using a Box-Behnken design as follows: 1% sucrose; 0.4% peptone; 0.1 % yeast extract; and (g/l): NaCl, 20.0; ${Na}_{2}{SO}_{4}$, 9.0; $CaCl_2$, 1.71; KCl, 0.4; and (mg/l): ${H_3}{BO_3}$, 10.0; KBr, 50.0; NaF, 2.0; $NaHCO_3$, 45.0; ${Na}_{2}{SiO}_{3}$, 4.5; ${NH_4}{NO_3}$, 4.5. The predicted maximum yield of prodigiosin in the optimized medium was 1.198 g/l by the Box-Behnken design, whereas the practical production was 1.495 g/l, which was three times higher than the basal medium (0.492 g/l).