• Clinical and Experimental Pediatrics
• /
• v.51 no.2
• /
• pp.162-169
• /
• 2008

Purpose : Oxcabarzepine (OXC), newly recommended antiepileptic drug, has been prescribed for patients with partial seizures and generalized tonic clonic seizures in Korea from 1999. There are limited reports about an efficacy of OXC therapy in epileptic children in Korea. This study evaluated the efficacy and safety of OXC in the light of our experience. Methods : The patients, who had visited the pediatric neurology clinic of Korea University Guro Hospital from January 2001 to December 2006, were included. The data of 144 patients who were administrated OXC as monotherapy or polytherapy, was summarized retrospectively and we evaluated the efficacy and safety of OXC. Results : After 6 months of OXC therapy, 77 patients (53.5%, n=144) achieved seizure freedom, 48 patients (33.3%) experienced >50% improvement. After 12 months of OXC therapy, cessation of seizure was observed in 88 patients (61.1%, n=133), and 27 patients (18.8%) manifested an improvement. Monotherapy group showed superior efficacy to polytherapy one. The frequent side effects of OXC were drowsiness (20.1%), headache (12.5%), dizziness (9.7%) and rash (8.3%). They did not related to patient's age or sex, and dosage of OXC. Twenty four patients (16.7%) experienced hyponatremia, but which were neither symptomatic nor significant one. Conclusion : The efficacy and safety of OXC in our patients were excellent and had less significant side effects than established international one. We expect this report contributes toward OXC therapy in epileptic children.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.3
• /
• pp.211-223
• /
• 2001

Background : Rhinovirus infection of the airways results in increased permeability of the airway vascular endothelium with the influx of plasma proteins, including lipids such as LDL. In vitro studies on the effect of oxLDL on leukocytes has shown many pro inflammatory effects on multiple leukocytes. We hypothesized that oxLDL is one mechanism for recruiting granulocytes to the airways during a RV infection. Therefore, chemotaxis and transendothelial migration, in response to nLDL, was determined for these granulocytes. Methods : nLDL was oxidized with 5mM Cu2S04 for 20-24 hours. 3-5 105 cells were loaded into the Transwell filter while the chemotatic agonists were placed in the lower well for chemotaxis. Confluent monolayers on HPMEC were grown on Transwell filters for transendothelial migration. The filters were washed and eosinophils and neutrophils loaded on to the filter with the chemotatic agonist was were placed in the lower well. The wells were incubated for 3 hours. The number of migrating cells was counted on a hemocytometer. Results : OxLDL, but not nLDL, is chemotatic for eosinophils and neutrophils. The level of granulocytes chemotaxis was dependent on both the concentration of LDL and its degree of oxidation. OxLDL stimulates eosinophil and neutrophils migration across HPMEC monolayers (+/-IL-$1{\beta}$ preactivation) in a dose dependent manner. Conclusion : Increased vascular permeability during a RV infection may lead to the influx and oxidation of LDL. The resulting oxLDL. is one possible mechanism for the recruitment of neutrophils and eosinophils to the airway interstitial matrix. Once in the airways, granulocytes can further interact with oxLDL to promote airway inflammation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.80-81
• /
• 2012

Recently, one of the critical issues in the etching processes of the nanoscale devices is to achieve ultra-high aspect ratio contact (UHARC) profile without anomalous behaviors such as sidewall bowing, and twisting profile. To achieve this goal, the fluorocarbon plasmas with major advantage of the sidewall passivation have been used commonly with numerous additives to obtain the ideal etch profiles. However, they still suffer from formidable challenges such as tight limits of sidewall bowing and controlling the randomly distorted features in nanoscale etching profile. Furthermore, the absence of the available plasma simulation tools has made it difficult to develop revolutionary technologies to overcome these process limitations, including novel plasma chemistries, and plasma sources. As an effort to address these issues, we performed a fluorocarbon surface kinetic modeling based on the experimental plasma diagnostic data for silicon dioxide etching process under inductively coupled C4F6/Ar/O2 plasmas. For this work, the SiO2 etch rates were investigated with bulk plasma diagnostics tools such as Langmuir probe, cutoff probe and Quadruple Mass Spectrometer (QMS). The surface chemistries of the etched samples were measured by X-ray Photoelectron Spectrometer. To measure plasma parameters, the self-cleaned RF Langmuir probe was used for polymer deposition environment on the probe tip and double-checked by the cutoff probe which was known to be a precise plasma diagnostic tool for the electron density measurement. In addition, neutral and ion fluxes from bulk plasma were monitored with appearance methods using QMS signal. Based on these experimental data, we proposed a phenomenological, and realistic two-layer surface reaction model of SiO2 etch process under the overlying polymer passivation layer, considering material balance of deposition and etching through steady-state fluorocarbon layer. The predicted surface reaction modeling results showed good agreement with the experimental data. With the above studies of plasma surface reaction, we have developed a 3D topography simulator using the multi-layer level set algorithm and new memory saving technique, which is suitable in 3D UHARC etch simulation. Ballistic transports of neutral and ion species inside feature profile was considered by deterministic and Monte Carlo methods, respectively. In case of ultra-high aspect ratio contact hole etching, it is already well-known that the huge computational burden is required for realistic consideration of these ballistic transports. To address this issue, the related computational codes were efficiently parallelized for GPU (Graphic Processing Unit) computing, so that the total computation time could be improved more than few hundred times compared to the serial version. Finally, the 3D topography simulator was integrated with ballistic transport module and etch reaction model. Realistic etch-profile simulations with consideration of the sidewall polymer passivation layer were demonstrated.

• Journal of the Korean Society of School Health
• /
• v.8 no.2
• /
• pp.233-243
• /
• 1995

A survey has conducted on two hundred high school students of the first and second grade by way of questionnaine in Seoul. The purpose of this study on the information from the survey is to cstimate the level of awareness and probe how they feel and what they wish on sex. X2 inspection is designed to assess general aspects of responded contents by way of percentage and examine degree of satisfaction on previously experienced sex education and demand for sex education. The result is as follows. 1. As a result of the examination of degree of awareness on sex of respondents, 62% delines sex as human relationship including moral values for harmony between men and women. 64% of the men and 70% of the women say that sex is a natural thing. It comes to the conclusion that most of the respondent sgenerally consider sex positive. On chastity, 68.5% of the respondent answer that it means physical chastity, 12.5% that chastity before marriage should be kept, and 43% that it should be kept as far as possible. Most of them pespond that it should be kept. 2. As a result of the examination on the contents of sex, they answer they know well in the order of masturbation(72%), pregnancy(76%), and sex(63%). Contraception, abortion and ejection are contents they poorly informed of. 3. As a result of the examination on experienede of sex education, 83% of men and 100% of women have experienced sex, education, but their degreeof satisfaction to it is very low. And 49% of the whole is dissatisfactory to it. There is some difference between male and female students.(p=0.000) That result translates that female studeuts are educated on sex tjhrough more systematic subjects than male ones. In addition, it turns out that teenagers get most information on sex through friends, seniors, and mass media such as videos, TV and radios. Correct and systematic sex education is need because wrong information on sex culd be taught and bring them to misbehave. 4. 87.5% of the respondents answer that sex education is necessary, so that degree of necessity for sex education, turns out to be very high. Also the main subject that should perform sex education is in the order of school(50%), Society(24.5), home(18.5%). They respond that most appropriated period for the beginning of sex education is about elementary school age(43%), and 34% believes it to be put ahcad of elementary school age. Anurse teacher accounts for 54% for the main subject that addresses sex education, to male students visit teachers are most favored for 50%. As a result of those, it could be concluded that most high school students want sex education from responsible persons who have systematic and professional knowledge on sex. 5. In order to perform proper sex education by the above results, better educational effects are obtained when characteristics and natures of teenagers are known and most wanted knowledge by them is taught in priority in times of planning sex education. Besides, the contents of sex education suitable for each school should be planned before elementary school age and sex education should be performed in accordance with students' demand. In addition, sex education should be attentively performed by home, all organizations of society as well as school. Therefore, sex education will play a great role in making teenagers reestablish their conception on sex when the traditional and moral value systems of our country and the new value systems which are being formed under the influence of the western culture are in harmony.

• Journal of Life Science
• /
• v.18 no.8
• /
• pp.1106-1114
• /
• 2008

The antioxidants activities in water and 95% ethanol extracts of wa-song (Orostachys japonicus A. Berger) dried by sun, hot air and lyophilization were measured in vitro reaction system. In reaction system containing linoleic acid, the antioxidant activities against lipid oxidation enhanced in proportion to storage time. The antioxidant activity of ethanol extracts was higher than that of water extracts. In the drying methods, wa-song extracts showed higher antioxidant activity in the other of hot air-dried, lyophilized and sun-dried. The lipid oxidation system containing the promoting factors, such as $Fe^{+2}$ and $Cu^{+2}$ions, also showed that the ethanol extract of hot air-dried wa-song possessed the highest antioxidant activity. Soybean oil and lard being added with various levels (0.1, 0.5 and 1.0 g/100 g) of the ethanol extract of hot air-dried wa-song were stored at $60^{\circ}C$ (for 28 days) or $180^{\circ}C$ (for 48 hr). Its extract appeared to lower the acid value of soybean oil, wheras it failed to lower the acid value for lard at early storage time, but it was lower than control and BHT after 28 days. Anicidine value and peroxide value were lower soybean and lard added wa-song extract than control and BHT for storage for 28 days at $60^{\circ}C$. In 28 days, its value was significantly decreased in proportion to sample concentration. TBA value was increased during storage time at $60^{\circ}C$, but it was significantly decreased by sample concentration after storage 36 hours at $180^{\circ}C$ storage. Therefore results suggest ethanol extract of hot air-dried wa-song could be potential candidates for natural antioxidants for materials containing lipid.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.95-104
• /
• 2005

The purpose of this study is to estimate the determinants of product design and analyze the impacts of product design on quality competitiveness, product reliability, and consumer satisfaction in an attempt to provide a foundation for the theory of design management. For this empirical analysis, this study has derived the relevant measurement variables from a survey on 400 Korean manufacturing firms during the period of $August{\sim}October$ 2003. The empirical findings are summarized as follows: First, the determinants of product design are very significantly (at p<0.001) estimated to be the R&D capability, the level of R&D expenditure, the level of innovative activities(5S, TQM, 6Sigma, QC, etc.). This empirical result can support Pawar and Driva(1999)'s two principles by which the performance of product design and product development can be simultaneously evaluated in the context of CE(concurrent engineering) of NPD(newly product development) activities. Second, the hypothesis on the causality: product design${\rightarrow}$quality competitiveness${\rightarrow}$customer satisfaction${\rightarrow}$customer loyalty is very significantly (at p<0.001) accepted. This implies that product design positively affects consumer satisfaction, not directly but indirectly, by influencing quality competitiveness. This empirical result of this study can also support the studies of for example Flynn et al.(1994), Ahire et at.(1996), Afire and Dreyfus(2000) which conclude that design management is a significant determinant of product quality. The aforementioned empirical results are important in the following sense: the empirical result that quality competitiveness plays a bridging role between product design and consumer satisfaction can reconcile the traditional debate between QFD(quality function development) approach asserted by product developers and conjoint analysis maintained by marketers. The first empirical result is related to QFD approach whereas the second empirical result is related to conjoint analysis. At the same time, the empirical results of this study can support the rationale of design integration(DI) of Ettlie(1997), i.e., the coordination of the timing and substance of product development activities performed by the various disciplines and organizational functions of a product's life cycle. Finally, the policy implication (at the corporate level) from the empirical results is that successful design management(DM) requires not only the support of top management but also the removal of communication barriers, (i.e. the adoption of cross-functional teams) so that concurrent engineering(CE), the simultaneous development of product and process designs can assure product development speed, design quality, and market success.

• Journal of Korean Public Health Nursing
• /
• v.15 no.2
• /
• pp.239-248
• /
• 2001

The purpose of this study was to analyze risk factors for nosocomial pneumonia in patients admitted to NS ICU, and to provide a basic data to decrease respiratory nosocomial infection rate engendered from medical environments in NS ICU. The study site was the NS ICU at a university hospital located in Seoul, Korea. The subjects were 31 patients diagnosed with nosocomial pneumonia, who were selected from the initial list of 300 potential subjects who had been a) admitted between September 1999 and January 2000, and September 2000 and January 2001, b) resided at the NS ICU over 72 hours. The diagnostic standard of nosocomial pneumonia was based on the nosocomial infection guides of C university hospital. The data were analyzed using frequencies and logistic regression analysis. The sputums obtained from the subjects were cultivated and causal viruses were separated. The results were as follows: 1. The nosocomial pneumonia rate was $10.3\%$. There were 7 types of causal viruses separated from the sputum. and the most prevalent type of virus was MRSA as $62.2\%$. 2. The factors significantly influencing the incidence of nosocomial pneumonia included age, the residential duration at the NS ICU, GCS scores, diabetes mellitus, insertion of tracheal tube and its duration, tracheostomy and its length of insertion, the use of artificial ventilator and the length of its use, and the insertion of naso-gastic tube. The most significant risk factor among these was the insertion of tracheal tube (odds ratio=18.684. $95\%$ CI=6.849-50.974), followed by the use of tracheostomy (odds ratio=15.419, $95\%$ CI=6.615-35.942), the insertion of naso-gastric tube (odds ratio=14.875, $95\%$ CI=6.396-34.595), and the use of artificial ventilator (odds ratio=13.000. $95\%$ CI=5.633­30.001). 3. Regarding the use of the mechanical aids, the insertion of tracheal tube resulted in 12.968 times increase of the nosocomial pneumonia rate, and the use of artificial ventilator lead 6.714 times increase of the nosocomial pneumonia rate. One point increase of the GCS score resulted in the 1.210 times increase of the nosocomial pneumonia rate. For patients who had tracheal tube, tracheostomy, and artificial ventilator, one day increase of their residential duration at NS ICU lead 1.073 times increase of the nosocomial pneumonia rate. 4. In terms of duration of the mechanical aid usage, one day increase in the use of artificial ventilator engendered 1.080 times increase in the nosocomial pneumonia rate. One day increase of the residential duration at the NS ICU lead 1.604 times increase in the nosocomial pneumonia rate. As one point of the GCS score increased, 0.876 times decrease of the nosocomial pneumonia rate was reported. These study findings show that the risk factors significantly influencing the incidence of nosocomial pneumonia include the use of tracheal tube, tracheostomy, naso-gastic tube, and artificial ventilator. It is recommended that nurses working at NS ICU should pay more attention to the patients with these factors as the risky group for the nosocomial pneumonia, and thus make more active efforts to provide nosocomial pneumonia prevention strategies for them. In further studies patients admitted to the different types of ICUs such as internal medicine or surgery unit ICU will be also included, and more wide investigation of nosocomial pneumonia risk factors will be conducted through one-year longitudinal follow up.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.269-276
• /
• 2009

Radiation treatment techniques using photon beam such as three-dimensional conformal radiation therapy (3D-CRT) as well as intensity modulated radiotherapy treatment (IMRT) demand accurate dose calculation in order to increase target coverage and spare healthy tissue. Both jaw collimator and multi-leaf collimators (MLCs) for photon beams have been used to achieve such goals. In the Pinnacle3 treatment planning system (TPS), which we are using in our clinics, a set of model parameters like jaw collimator transmission factor (JTF) and MLC transmission factor (MLCTF) are determined from the measured data because it is using a model-based photon dose algorithm. However, model parameters obtained by this auto-modeling process can be different from those by direct measurement, which can have a dosimetric effect on the dose distribution. In this paper we estimated JTF and MLCTF obtained by the auto-modeling process in the Pinnacle3 TPS. At first, we obtained JTF and MLCTF by direct measurement, which were the ratio of the output at the reference depth under the closed jaw collimator (MLCs for MLCTF) to that at the same depth with the field size $10{\times}10\;cm^2$ in the water phantom. And then JTF and MLCTF were also obtained by auto-modeling process. And we evaluated the dose difference through phantom and patient study in the 3D-CRT plan. For direct measurement, JTF was 0.001966 for 6 MV and 0.002971 for 10 MV, and MLCTF was 0.01657 for 6 MV and 0.01925 for 10 MV. On the other hand, for auto-modeling process, JTF was 0.001983 for 6 MV and 0.010431 for 10 MV, and MLCTF was 0.00188 for 6 MV and 0.00453 for 10 MV. JTF and MLCTF by direct measurement were very different from those by auto-modeling process and even more reasonable considering each beam quality of 6 MV and 10 MV. These different parameters affect the dose in the low-dose region. Since the wrong estimation of JTF and MLCTF can lead some dosimetric error, comparison of direct measurement and auto-modeling of JTF and MLCTF would be helpful during the beam commissioning.

• Neonatal Medicine
• /
• v.18 no.2
• /
• pp.204-210
• /
• 2011

Purpose: Feeding intolerance is common in very low birth weight infants(VLBWI); however, research on the etiology is limited. We investigated the incidence of allergic enterocolitis (AEC) as a cause of feeding intolerance and present the clinical characteristics of VLBWIs. Methods: The medical records of VLBWIs admitted to the neonatal intensive care unit of Samsung Medical Center between January 2009 and July 2010 were retrospectively analyzed. AEC was defined as patients who had feeding intolerance with eosinophila and who responded to hypoallergenic feeding intervention. Feeding intolerance symptoms included blood tinged stools, abdominal distension, residual feeding and regurgitation. Eosinophilia was defined as an eosinophil count ${\geq}$700 cells/$mm^3$. Patients with feeding intolerance were divided into the AEC or non-AEC group. Results: Of the 181 patients, 161 (88.9%) had a feeding intolerance, and 119 (65.7%) had eosinophilia. Seventeen infants were diagnosed with AEC. No difference in mean gestational age, birth weight, antibiotics duration, TPN duration, hospitalization, or symptom onset day was observed between patients with AEC and non-AEC patients. The percentage of eosinophilia was significantly higher in patients with AEC than in non-AEC patients. Two patients (12%) improved with restricted breast milk, 10 patients (59%) with extensively hydrolyzed formula and five patients (29%) with free amino acid-based formula. Conclusion: Our results suggest that AEC should be considered in VLBWIs who have clinical features of feeding intolerance and eosinophilia. An aggressive increase in feeding would be possible through feeding intervention in VLBWIs with feeding intolerance.

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.1
• /
• pp.37-43
• /
• 2007

1. Purpose : This study is to present effective exposure conditions to acquire the best image of simple abdomen in Film Screen (F.S) system and Computed Radiography (C.R) system. 2. Method : In the F.S system, while an exposure condition was fixed as 70kVp, images of a patients simple abdomen were taken under the different mAs exposure conditions. Among these images, the best one was chosen by radiologists and radiological technologists. In the C.R system, the best image of the same patient was acquired with the same method from the F.S system. Both characteristic curves from F.S system and C.R system were analyzed. 3. Results : In the F.S system, the best exposure condition of simple abdomen was 70kVp and 20mAs. In the CR system, with the fixed condition at 70kVp, the image densities of human organs, such as liver, kidney, spleen, psoas muscle, lumbar spine body and iliac crest, were almost same despite different environments (3.2mAs, 8mAs, 12mAs, 16mAs and 20mAs). However, when the exposure conditions were over or under (below) 12mAs, the images between the abdominal wall and the directly exposed part became blurred because the gap of density was decreased. In the C.R system, while the volume of mAs was decreased, an artifact of quantum mottle was increased. 4. Conclusion : This study shows that the exposure condition in the C.R system can be reduced 40% than in the F.S system. This paper concluded that when the exposure conditions are set in CR environment, after the analysis of equipment character, such as image processing system(EDR : Exposure Data Recognition processing), PACS and so on, the high quality of image with maximum information can be acquired with a minimum exposure dose.