• 제목/요약/키워드: $SO_2$ measurement

검색결과 1,948건 처리시간 0.031초

비행고도 상에서의 우주방사선 관측 및 모델 비교 (Radiation Dose Measurement and Model Comparison at the Flight Level)

  • 이원형;김지영;장근일
    • 한국항공운항학회지
    • /
    • 제26권2호
    • /
    • pp.91-97
    • /
    • 2018
  • High-energy charged particles are comprised of galactic cosmic rays and solar energetic particles which are mainly originated from the supernova explosion, active galactic nuclei, and the Sun. These primary charged particles which have sufficient energy to penetrate the Earth's magnetic field collide with the Earth's upper atmosphere, that is $N_2$ and $O_2$, and create secondary particles and ionizing radiation. The ionizing radiation can be measured at commercial flight altitude. So it is recommended to manage radiation dose of aircrew as workers under radiation environment to protect their health and safety. However, it is hard to deploy radiation measurement instrument to commercial aircrafts and monitor radiation dose continuously. So the numerical model calculation is performed to assess radiation exposure at flight altitude. In this paper, we present comparison result between measurement data recorded on several flights and estimation data calculated using model and examine the characteristics of the radiation environment in the atmosphere.

대체 보조전극을 이용한 접지저항 측정 신뢰성 분석 (Trust Analysis of Ground Resistance Measurements by the Substitute Auxiliary Electrode)

  • 이상익;유재근;전정채;전현재
    • 전기학회논문지P
    • /
    • 제56권2호
    • /
    • pp.109-114
    • /
    • 2007
  • This paper summarize about the auxiliary electrode measured a ground resistance. The method to measure a ground resistance is the fall-of-potential method to using an auxiliary electrode. And an auxiliary electrode must be set up on the ground. Today it is so difficult to set up the auxiliary electrode on the ground because of many concrete building and many paved roads. So this paper is regarding a trust analysis of the ground resistance measurement by the substitute auxiliary electrode. It substituted a iron structure around the building, a neutral line multiplex ground to earth, a wire net for auxiliary electrode. This information is confirmed bv compared with the measurement value.

이동 측정방법을 사용한 부산지역 주요 도로의 대기오염도 조사 (An Investigation into Air Quality of Main Roads in Busan using Mobile Platform Measurement)

  • 도우곤;정우식;유은철;곽진
    • 한국환경과학회지
    • /
    • 제22권9호
    • /
    • pp.1199-1211
    • /
    • 2013
  • Mobile sources produce a significant fraction of total anthropogenic emissions in Korea and have harmful effects on air quality. Mobile emissions are intrinsically difficult to estimate due to complicated road networks and variations of traffic volume with location and time. To measure traffic pollutants with high temporal and spatial resolution under real conditions a mobile laboratory was designed. The mobile laboratory provide concentrations of $SO_2$, CO, NO, $NO_2$ and location coordinate value. This approach allowed for pollutant level measurements on many roads within short periods of time. In this study, on-road concentrations of $SO_2$, CO, NO and $NO_2$ were measured using mobile platform measurement along the 25 main roads in Busan to estimate the average air pollution level in short time difference. The measurements were conducted on favorable meteorological days from 2010 to 2012 and the overall concentrations of $SO_2$, CO, NO and $NO_2$ were 0.006, 0.8, 0.182 and 0.055 ppm respectively. The result showed that the concentration of CO, NO and $NO_2$ on road were twice, 18 times and 2.5 times higher than regional air quality monitoring sites mean in same period.

무선센서네트워크 기반 공기질 측정을 위한 비분산적외선 복합가스측정시스템 (NDIR Multi-Gas Measurement System for Air Quality based on Wireless Sensor Network)

  • 백승현;이준영;정상우;박홍배
    • 대한임베디드공학회논문지
    • /
    • 제11권5호
    • /
    • pp.299-304
    • /
    • 2016
  • As public interest in air quality and environment problem is increasing, many researches are being carried out the gas measurement system. Especially, Non-dispersive infrared (NDIR) measurements using Beer-Lambert gas sensing principle with very high selectivity and long life time are noted for reliable method. It is possible to detect various gases such as carbon dioxide (CO2), carbon monoxide (CO), and nitrogen dioxide (NO2), but many researches are mostly concentrated on CO2 sensor. The multi-gas measuring instrument is high price and unwieldy, therefore it is not suitable for wide area required numerous instrument. So we study the NDIR multi-gas measurement system for air quality based on wireless sensor network, and experiment the realized measurement system.

초연마 저산란 반사경 기판 제작과 평가 (Production and measurement of a super-polished low-scattering mirror substrate)

  • 조민식
    • 한국군사과학기술학회지
    • /
    • 제2권2호
    • /
    • pp.157-165
    • /
    • 1999
  • Production and measurement of a super-polished few-ppm-scattering mirror substrate are investigated. In order to improve the surface roughness directly determining scattering, the super-polishing process using Bowl-Feed technique is tried. The surface quality of the super-polished substrate is estimated by the phase-measuring interferometer. For the reliable roughness measurement using the interferometer, data averaging method is applied so that the optimal data averaging condition, 30 phase-data averaging and 20 intensity-data averaging, minimizing the measurement error is experimently searched. Based on the optimal data averaging condition, surface roughness of home-made mirror substrate is measured to be less than $0.5{\AA}$ rms corresponding to 2-ppm total-integrated-scattering.

  • PDF

Tolerance of Several Woody Plants to Sulphur Dioxide

  • Hwangbo, Jun-Kwon;Lee, Chang-Seok;Kim, Joon-Ho
    • Animal cells and systems
    • /
    • 제4권4호
    • /
    • pp.337-340
    • /
    • 2000
  • The photosynthetic and stomatal responses of several woody plants (Powlonia coreana, Firmiana simplex, Quercus acutissima Q. variabilis and Q. serrata) to SO$_2$ were investigated in order to understand their ecophysiological tolerance to $SO_2$ Of the plants, P, coreana showed the largest reduction in its photosynthesis in response to exposure of 0.4 ppm $SO_2$ for 20 h. Fumigation of 0.7 ppm $SO_2$ for 20 h caused complete leaf necrosis of P. coreana and f simplex, which made them unavailable for the measurement of photosynthesis. Q. variabilis exhibited the smallest reduction in photosynthesis following exposure of 0.7 ppm $SO_2$ for 20 h. Both stomatal- and non-stomatal inhibition of the plants by $SO_2$ were determined according to equations by lkeda et at. (1992). When exposed to 0.4 ppm $SO_2$ for 20 h, F. simplex and P. coreana showed the lowest stomatal and non-stomatal inhibition, respectively, while Q. variabilis and Q. serrata exhibited the lowest stomatal and non-stomatal inhibition, respectively, in response to 0.7 ppm $SO_2$ for 20 h. The data are discussed with regard to resistance mechanisms of other plants to $SO_2$ exposure and implications for restoration of declined Korean forests.

  • PDF

광촉매 반응을 이용한 총유기탄소 분석 칩 (Total Organic Carbon Analysis Chip Based on Photocatalytic Reaction)

  • 김승덕;정동건;권순열;최영찬;이재용;구성모;공성호
    • 센서학회지
    • /
    • 제29권2호
    • /
    • pp.128-132
    • /
    • 2020
  • Total organic carbon (TOC) analysis equipment, which was previously used to prevent eutrophication in advance, is heavy, bulky, and expensive; therefore, so it is difficult to be carried and has been used as an experimental unit. In this study, a through-carbon analysis chip that integrates pretreatment through photocatalytic oxidation and carbon dioxide measurement using a pH indicator was investigated. Both the total carbon - inorganic carbon method and the nonpurgeable organic carbon (NPOC) measurement method require an acidification part for injecting an acid solution for inorganic carbon measurement and removal, an oxidation part for total carbon or NPOC oxidation and a measurement part for Carbon dioxide (CO2) measurement. Among them, the measurement of oxidation and CO2 requires physical technology. The proposed TOC analysis chip decomposed into CO2 as a result of the oxidizing of organic carbon using a photocatalyst, and the pH indicator that was changed by the generated CO2 was optically measured. Although the area of the sample of the oxidation part and the pH indicator of the measurement part were distinguished in an enclosed space, CO2 was quantified by producing an oxidation part and a measurement part that shared the same air in one chip. The proposed TOC analysis chip is less expensive and smaller, cost and size are disadvantages of existing organic carbon analysis equipment, because it does not require a separate carrier gas to transport the CO2 gas in the oxidation part to the measurement part.

전통 한방처방을 이용한 기초 한방화장품에 대한 임상적 연구 (The Clinical Study on Cosmetics by Using Traditional Herbal Medicine)

  • 김윤범;김호철
    • 한방안이비인후피부과학회지
    • /
    • 제15권1호
    • /
    • pp.259-275
    • /
    • 2002
  • During a clinical test with Korean herbal cosmetics, significant data and related results are summarized as following: 1. The questionnaire resulted the subjects who used Korean herbal cosmetics showed significant subjective improvement. 2. $11{\%}$ of the subjects who used Korean herbal skin lotion replied "very good" , $60{\%}$ "good" , and $29{\%}$ "so so". 3. In the questionnaire about how often the subjects who used Korean herbal skin lotion experienced skin irritation, $91{\%}$ of the subjects replied they didn't experience any skin irritation 4. The subjects who used oily & combinational cosmetics showed more significant result than the placebo group in the questionnaire about how they feel when using emulsion. 5. In the questionnaire about how they feel when using emulsion. $11{\%}$ of all the subjects replied "very good" , 60{\%}$ "good" , and $29{\%}$ "so so". 6. In the questionnaire about how they feel when using essence $18{\%}$ of all the subjects replied "very good" , $56{\%}$ "good" , and $27{\%}$ "so so". 7. In the questionnaire about how often the subjects who used skin lotion experienced skin irritation, $100{\%}$ of the subjects replied there was no skin irritation. 8. the subjects who used Korean herbal cosmetics showed significant result in the questionnaire about how much moisture they feel when using cream. 9. The subjects who used neutral & dry cosmetics showed more significant result than the placebo group in the questionnaire about if the cosmetics spread well when using emulsion. 10. The subjects who used oily & combinational cosmetics showed more significant result than the placebo group in the questionnaire about how much moisture they feel when using cosmetics. 11. In the questionnaire about how they feel when using cream $13{\%}$ of all the subjects replied "very good", $49{\%}$ "good", and $2{\%}$ "so so". 12. In the questionnaire about how often the subjects who used cream lotion experienced skin irritation, $96{\%}$ of the subjects replied there was no skin irritation. 13. In the measurement of coreometer, the subjects who used oily & combinational cosmetics showed significant result(measurement area : indang). Especially in the area of sungjang there is significant difference between the subjects group and placebo group. 14. In the measurement of skin-ph-meter, there was no significant change in all group. 15. in the measurement of melanin-erythema index meter, the subjects who used cosmetics which doesn't contain Korean herbs showed significant change and made significant difference in comparison to the subjects who used Korean herbal cosmetics.

  • PDF

정밀가공 부품 검사에 사용되는 3차원측정기의 측정불확도 연구 (A Study on Measurement Uncertainty of 3-dimensional Coordinate Measuring Machine used for Inspection of Precision Machined parts)

  • 이갑조;오상록;김종관
    • 한국공작기계학회논문집
    • /
    • 제14권2호
    • /
    • pp.55-61
    • /
    • 2005
  • The machining Parts must be Produced within the specification of drawing and those will be able to meet faction and efficiency. At that time, it is very important not only precision machine and machining technique but also the measurement technique. So, the improvement of measurement technique is to be joined together at once with improvement of machining technique. Finally, the quality and value of the parts are decided by precision measurement. This paper aims to study on the measurement uncertainty when the machined parts are inspected with 3-dimensional coordinate measuring machine. The objectives remove an error of measurement and remove a quality of mass products.

전산유체해석과 실측을 이용한 도심내 미기후 특성에 대한 연구 (A Study on the Characteristic Micro-Climate in the City using Computerized Fluid Analysis and Actual Measurement)

  • 유장열;박민우
    • 한국공간구조학회논문집
    • /
    • 제23권1호
    • /
    • pp.35-43
    • /
    • 2023
  • Microclimate analysis was conducted through actual measurement according to land use status in urban, and CFD analysis was conducted to analyze and predict the microclimate characteristics of urban, and compared and analyzed with the actual measurement results. It was measured in high-rise areas and parks, and the temperature of the park area was 0.4 to 0.6℃ lower, and the relative humidity was 1.0 to 3.0% higher. The correlation coefficient was obtained by comparing the results of the computational fluid analysis with the results of the computational fluid analysis at the actual location located within the CFD analysis area for validation. The seasonal correlation coefficients are all higher than 0.8, so it is judged that they can be applied to microclimate analysis in urban area. The computational fluid analysis was divided into three areas (low-rise, low and high-rise, and high-rise) centered on the A2 point. On average, the low-rise area was 0.1 to 0.4% higher than the high-rise area. In the low and high-rise area and high-rise area, the pith of buildings are wide, so the airflow is smooth, so it is judged that the temperature is relatively low.