• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.46-50
• /
• 1996

Die sinking Electrical Discharge Machining(EDM) of TiC/Al$_2$O$_3$Ceramic Matrix Composite(CMC) was conducted for positive and negative polarity according to the change of current and Duty Factor(DF). Also FEM analysis about temperature distribution of workpiece by one spark was executed. Maximum surface roughness( R$_{max}$ ) and SEM photographs of the EDMed surface for different conditions were evaluated. Higher Material Removal Rate(MRR) was obtained for negative polarity than positive one. Better surface morphology was found as the current is decreased, but the MRR was also decreased. From the SEM photographs, the size of melt cavity due to one spark is about 100 to 150${\mu}{\textrm}{m}$ in diameterer

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.797-804
• /
• 2001

To obtain representative fatigue crack growth characteristic curve in residual stress field, fatigue crack growth test was carried out at various stress ratio and fatigue crack growth characteristic curve was represented using crack closure concept. Obtained results are as follows;K(sub)op/K(sub)max was independent of K(sub)max when R was lower than 0.5 and crack closure phenomenon was not observed when R is higher than 0.5. therefore neglecting crack closure behaviour, actual fatigue crack growth rate can be underestimated. Thus, considering crack closure phenomenon, fatigue crack growth characteristics curve of A 106 Gr B Steel weldment can be effectively estimated.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.447-448
• /
• 2013

This paper investigates a new approach based on the fuzzy-logic controlled methodology that is suitable for analyzing and evaluating large format $LiMn_2O_4$ cell performance via online state-of-health (SOH) estimation for energy storage system (ESS) applications. First of all, the values of the cell resistance R and maximum cell capacity $Q_{max}$ are calculated from three factors such as voltage, current, and time that were measured by discharging/charging sequence. Then, using two values R and $Q_{max}$ previously calculated, present SOH of an arbitrary $LiMn_2O_4$ cell can be estimated using the defined fuzzy-logic inference system. The main advantage of this approach is wide parameters tuning possibility for good correspondence of SOH decay with other accurate estimation method and the possibility to perform suitable online SOH estimation.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.3
• /
• pp.35-42
• /
• 2011

This paper describes the characteristics of high speed grinding and the influence of wheel surface speed V and a grindability of the grinding materials. The various fine ceramics pieces was ground by metal and vitrified bonded diamond wheel. The surface roughness of fine ceramics(Zirconia($ZrO_2$), Silicon Carbide(SiC), Silicon Nitride($Si_3N_4$), Alumina($Al_2O_3$)) decreases from $0.05{\mu}m(R_{max})$ to $0.025{\mu}m(R_{max})$ when the wheel speed at grinding point increases the wheel speed. Relation between the temperature at grinding point and surface roughness was linear. Abrasive jet machining(AJM), a specialized from of shot blasting, is considered one of the most helpful micro machining methods for hard and brittle materials such as glasses and ceramics by constant pressure grinding.

• Journal of Powder Materials
• /
• v.8 no.1
• /
• pp.20-25
• /
• 2001

Most of mold manufacturing procedures have been automated by the introduction of NC machine tool and CAD/CAM system. But the three-dimensional surface curvature of the mold must be done by hand work of well-skilled workers. Magnetic abrasive polishing powders were investigated for surface polishing for 3D curvature. This study aims to investigate homogeneously distributed hard phase in Fe matrix and strong bonding between Fe-matrix and hard phase. The NbC powder, $B_4C$ powder and $Al_2O_3$ powder were mixed in Fe-matrix respectively. Mixed Fe-hard phase powders were compacted by press and then these were melted by plasma melting. According to SEM, XRD and OM observation, Fe-NbC magnetic abrsive powder had the most homogeneous distribution and strong bonding. As a result of magnetic polishing, the surface roughness before magnetic polishing, 1 ${\mu}m$ $R_{max}$, was reduced to 0.2 ${\mu}m$ $R_{max}$ over the entire inner surface of the tube.

• Archives of Pharmacal Research
• /
• v.19 no.5
• /
• pp.386-389
• /
• 1996

The in vivo behaviour of phenylephrine hydrochloride in different vehicles like gels of Carbopol $907^circledR$, Carbopol $934P^circledR$ and latex system of cellulose acetate hydrogen phthalate(CAHP) was evaluated by measuring the reduction in intraocular pressure and the mydriatic activity. The parameters that haave been utilised to assess the performance of the formulations were the area under the curve (AUC), the maximum mydriasis $(I_{max})$, ethe time of maximum response $(T_{max})$ and the duration of activity (D). The influence of viscosity and mucoadhesion on the bioavailability parameters has also been investigated. Carbopol 934P and CAHP formulations showed prolonged duration of action and greater AUC compared to Carbopol 907 aqueous solution(P<0.05).

• Nonlinear Functional Analysis and Applications
• /
• v.28 no.4
• /
• pp.919-928
• /
• 2023

Let P(z) be a polynomial of degree n and P(z) ≠ 0 in |z| < 1. Then for every real α and R > 1, Aziz [1] proved that $$\max\limits_{{\mid}z{\mid}=1}{\mid}P(Rz)-P(z){\mid}{\leq}{\frac{R^n-1}{2}}(M^2_{\alpha}+M^2_{{\alpha}+{\pi}})^{\frac{1}{2}}{\mid},$$ where $$M{\alpha}={\max\limits_{1{\leq}k{\leq}n}}{\mid}P(e^{i({\alpha}+2k{\pi})n}){\mid}.$$ In this paper, we establish some improvements and generalizations of the above inequality concerning the polynomials and their ordinary derivatives.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.6
• /
• pp.553-560
• /
• 2007

Purpose: We evaluated the standard uptake value (SUV) of F-18 FDG at PET/CT for differentiation of benign from malignant tumor in primary musculoskeletal tumors. Materials and Methods: Forty-six tumors (11 benign and 12 malignant soft tissue tumors, 9 benign and 14 malignant bone tumors) were examined with F-18 FDG PET/CT (Discovery ST, GE) prior to tissue diagnosis. The maxSUV(maximum value of SUV) were calculated and compared between benign and malignant lesions. The lesion analysis was based on the transverse whole body image. The maxSUV with cutoff of 4.1 was used in distinguishing benign from malignant soft tissue tumor and 3.05 was used in bone tumor by ROC curve. Results: There was a statistically significant difference in maxSUV between benign (n=11; maxSUV $3.4{\pm}3.2$) and malignant (n=12; maxSUV $14.8{\pm}12.2$) lesions in soft tissue tumor (p=0.001). Between benign bone tumor (n=9; maxSUV $5.4{\pm}4.0$) and malignant bone tumor (n=14; maxSUV $7.3{\pm}3.2$), there was not a significant difference in maxSUV. The sensitivity and specificity for differentiating malignant from benign soft tissue tumor was 83% and 91%, respectively. There were four false positive malignant bone tumor cases to include fibrous dysplasia, Langerhans-cell histiocytosis (n=2) and osteoid osteoma. Also, one false positive case of malignant soft tissue tumor was nodular fasciitis. Conclusion: The maxSUV was useful for differentiation of benign from malignant lesion in primary soft tissue tumors. In bone tumor, the low maxSUV correlated well with benign lesions but high maxSUV did not always mean malignancy.

• Korean Journal of Clinical Pharmacy
• /
• v.18 no.2
• /
• pp.106-113
• /
• 2008

The aim of this study was to evaluate the bioequivalence of two domperidone preparations. Bioequivalence assessment was conducted on 34 healthy volunteers who received two tablets (Domperidone Maleate, 12.72 mg/tablet) in the fasting state, in a randomized balanced $2{\times}2$ cross-over study design. This whole study was performed according to the implementation guidelines of the Korea Food Drug Administration. After dosing of two tablets, blood samples were collected serially for a period of 36 hours. Plasma was analyzed for domperidone by using LC/MS/MS assay method. The analysis system was validated in specificity, accuracy, precision, and linearity. $AUC_t$, (the area under the plasma concentration-time curve from the zero-time to 36 hr) was calculated through the trapezoidal rule. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma domperidone concentration-time data of each volunteer. No significant sequence effect was found for the bioavailability parameters indicating that the cross-over design was properly performed. The 90%-Confidence intervals of the $AUC_t$ ratio and the $C_{max}$ were from log 0.8007 to log 1.1240 and log 0.8645- log 1.2483, respectively. These values were within the acceptable bioequivalence intervals between 0.80 and 1.25. Therefore, this study demonstrated that two formulations have bioequivalence with respect to the rate and extent of absorption.

• ALGAE
• /
• v.29 no.4
• /
• pp.321-331
• /
• 2014

Vertebrata lanosa is an abundant and obligate red algal epiphyte of Ascophyllum nodosum that forms part of a complex and highly integrated symbiotic system that includes the ascomycete, Mycophycias ascophylli. As part of ongoing studies to resolve interactions among species in the symbiosis, we used pulse amplitude modulation fluorimetry of chlorophyll a fluorescence, from photosystem II (PSII), to measure the maximum quantum yield ($F_v/F_m$) of PSII [$QY(II)_{max}$] and relative photosynthetic electron transport rates (rETR), as a function of light intensity, in order to evaluate the photosynthetic capacity of the two algal symbionts in the field and in the laboratory under different treatments. Our primary question was 'Is the ecological integration of these species reflected in a corresponding physiological integration involving photosynthetic process?' In the laboratory we measured changes in $QY(II)_{max}$ in thalli of V. lanosa and A. nodosum over one week periods when maintained together in either attached or detached treatments or when maintained separated from each other. While the $QY(II)_{max}$ of PSII of A. nodosum remained high and showed no significant variation among treatments, V. lanosa showed decreasing performance in the following conditions: V. lanosa attached to A. nodosum, V. lanosa in the same culture, but not attached to A. nodosum, and V. lanosa alone. These results are consistent with observations in which rETR was reduced in V. lanosa maintained alone versus attached to A. nodosum. Values for $QY(II)_{max}$ in V. lanosa measured in the field in fully submerged thalli were similar to those measured in the laboratory when V. lanosa was attached to it obligate host A. nodosum. Our results provide evidence of a physiological association of the epiphyte and its host that reflects the known ecology.