• 천문학회보
• /
• 제43권2호
• /
• pp.53.3-54
• /
• 2018

On June 16 AT2018cow (ATLAS 18qqn) was discovered as a bright and fast-evolving transient in nearby universe z ~ 0.01. It brightened by more than 4 mag within a day, and its light curve was decayed rapidly and has a high luminous peak which is more luminous than most of core-collapse supernova. It also overall showed a blue color in an unprecedented case of transients. There have been attempts to explain this behavior with existing models, but most of them have been insufficient except for one - tidal disruption by intermediate-mass black hole. We began to monitor this transient from about 4 days after the discovery until August 21 in the optical bands with 1m-class telescopes over the world. Here, we present a light curve of AT2018cow in the B, V, R and I bands, and analyze its photometric properties and compare to other transients and models.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.850-858
• /
• 1993

Germinatin and early growth of tobacco seedlings in trays containing many cells is increasing in popularity . Since 100 % germination is not likely , a major problem is to locate and replace the content of those cells which contain either no seedling or a stunted seedling with a plug containing a viable seedling. Empty cells and seedlings of poor quality take up valuable space in a greenhouse. They may also cause difficulty when transplanting seedlings into the field. Robotic technology, including the implementation of computer vision, appears to be an attractive alternative to the use of manual labor for accomplishing this task. Operating AGBOT, short for Agricultural ROBOT, involved four steps : (1) capturing the image, (2) processing the image, (3) moving the manipulator, (4) working the gripper. This research seedlings within a cell-grown environment. the configuration of the cell-grown seedling environment dictated the design of a Cartesian robot suitable for working ov r a flat plane. Experiments of AGBOT performance in transferring large seedlings produced trays which were more than 98% survived one week after transfer. In general , the system generated much better than expected.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.62-62
• /
• 2003

과학위성 1호에는 위성의 임무를 수행하기 위하여 광학계, 구조부, 및 전자부 등 여러가지 부품들이 실장되는데, 그 중 전자부의 가장 중요한 부품 중의 하나인 인쇄회로기판(Printed Circuit Board, PCB)의 우주환경에서의 특성 대해서 논의하고자 한다. Solder Resistor(Solder Mask)의 화학성분이 위성체가 작동하는 우주환경에서 위성체 임무수행 시 발생할 수 있는 out-gassing으로 인해 위성체가 본연의 임무 실패라는 결과를 초래할 수 있다 NASA 및 ESA의 Out-gassing에 관한 규정과 TRW에 의한 KOMSAT에 사용된 재료의 진공상태의 Outgassing에 관한 내용에 의하면, 재료의 진공상태와 Out-gassing은 America Society for Testing and Materials에서 제시한 ASTM E959 기준에 따라 제작된다. 일반적으로 우주 환경에서 광학계나 전자부의 원활한 동작을 위해서는 인쇄 회로 기판의 총 질량손실(Total Mass Loss, TML)은 1.00%을 넘지 말아야 하며, 휘발성 응축 질량 (Collected Volatile Condensable Mass, CVCM)은 0.1% 미만이어야 한다. Total Mass Loss(TML) 방법은 대기중에서 측정한 질량과 진공 조건에서 변화되는 질량을 측정함으로써 진공조건에서의 탈기체 특성을 측정하는 방법이다. 본 연구에서는 Solder Resistor(Solder Mask)의 탈기체 측정을 위한 진공챔버의 측정방법 및 진공 형성 과정을 기술하고 실제 과학위성1호에 장착될 시료를 예로 들어 인쇄회로기판에 입힌 Solder Resistor(Solder Mask)가 우주환경인 진공상태에서 위성체 부품의 작동 시 발생할 수 있는 탈기체되는 정도를 질량의 변화분으로 측정하여 위성체가 우주 환경에서 본연의 임무를 안전하게 수행할 있는지를 검증하였다.부분이다.다.향을 해석하고 시뮬레이션 하였다.Device Controller)는 ECU로부터 명령어를 받아서 arm 및 safe 상태에 대한 텔리 메트리 데이터를 제공한다 그리고, SAR(Solar Array Regulator)는 ECU로부터 Bypass Relay 및 ARM Relay에 관한 명령어를 받아 수행되며 그에 따른 텔리 메트리 데이터를 제공한다. 마지막으로 EPS 소프트웨어를 검증하는 EPS Software Verification을 수행하였다 전력계 소프트웨어의 설계의 검증 부분은 현재 설계 제작된 전력계 .소프트웨어의 동작 특성 이 위성 의 전체 운용개념과 연계하여 전력계 소프트웨어가 전력계 및 위성체의 요구조건을 만족시키는지를 확인하는데 있다. 전력계 운용 소프트웨어는 배터리의 충ㆍ방전을 효율적으로 관리해 3년의 임무 기간동안 위성체에 전력을 공급할 수 있도록 설계되어 있다this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로

• 한국전자파학회논문지
• /
• 제21권1호
• /
• pp.90-97
• /
• 2010

본 논문에서는 GSM, DCS, PCS, WCDMA 대역을 지원하는 휴대폰 단말기의 무선 성능을 개선시키기 위한 PIFA(Planar Inverted-F Antenna) 구조와 접지면의 형태에 대해 연구하였다. 다중 공진을 유도하기 위해 안테나 방사체를 다수의 전류 경로를 가진 가지 구조로 설계한 후에 특정 방사체 아래쪽에 방사체와 유사한 모양의 접지면을 배치함으로써 안테나의 공진 특성과 방사 효율을 개선시켜 휴대폰 단말기의 무선 성능을 개선할 수 있는 설계 방법에 대해 제안한다. 실제 휴대폰 단말기를 통해 제안된 안테나와 접지면 구조에 대한 무선 성능을 측정한 결과, 적용 이전에 비해 GSM 대역의 TRP(Total Radiated Power)는 2.0 dB, TIS(Total Isotropic Sensitivity)는 3.7 dB 향상되었으며, DCS 대역 TRP와 TIS는 각각 2.2 dB, 2.0 dB가 향상되는 결과를 얻었다. 또한 PCS 대역 TRP, TIS는 0.8 dB, 1.5 dB 향상되었으며, WCDMA 대역 TRP, TIS는 1.3 dB, 0.7 dB 향상되었다.

• 한국결정학회지
• /
• 제2권2호
• /
• pp.7-12
• /
• 1991

C13H18N2O3(Mr=250.29)는 단사정계의 P211a의 공간군을 갖고 있으며 a=8.765(4), b=17.679 (3), c=9.238(4)A, p=105.6(3)A, z=4, V= 1378.53A3, A(Mo Ka)=0.71069A, 1:0. 81cm-1, F(000)=536, T=298 이며 1.0 σ(I)보다 큰 강도를 가진 1783개의 회절반점에 대하여 최종 R값은 0.080이다. 직접법에 의하여 구조를 풀었으며 C-H 결합길이와 메칠기는 길이를 고정시켜 이 상적인 기하학적 구조에 맞추어 계단식 대각최소자 승법에 의하여 정밀화하였다 두 에토오키시기중의 하나는 다른 기에 비해 100°나 더 기울어져있다. 결정격자내에 한개의 N-H‥‥0(2.798A) 수소결합이 있어 두 분자를 연결하면서 b-축에 따라 쌓여져 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제10권3호
• /
• pp.318-323
• /
• 1997

In order to assess the effect of solar exposure on pulmonary functions and evaporative losses from skin and pulmonary surfaces, in six healthy Sahiwal (S) and six Sahiwal ${\times}$ Holstein ($S{\times}H$) cattle were exposed to direct sun during summer. Breed differences were observed during exposure. Increase in sweating rate was higher in crossbreds (222%) than in Sahiwal (125%). Pre-exposure (ambient temperature, $32.6{\pm}0.85^\circ}C$, solar radiation, $0.9cal\;cm^{-2}min^{-1}$) evaporative loss from skin accounted for about 90% of the losses and remaining losses were contributed by pulmonary surfaces in Sahiwal. The contribution of evaporation through skin increased to 92% (ambient temperature $39.4{\pm}0.68^\circ}C$, solar radiation, $1.35cal\;cm^{-2}min^{-1}$). In crossbreds 80% of the evaporative losses were through skin before exposure which increased to 87% after exposure to solar radiations. Rectal temperature increase was higher in crossbreds ($1.5^{\circ}C$) than in Sahiwal ($0.8^{\circ}C$). With the increase in pulmonary evaporative losses, respiratory frequency increased to 2 fold in Sahiwal and pulmonary ventilation increased 1.6 times the resting value in Sahiwal due to solar exposure. In $S{\times}H$ crossbreds the respiratory frequency increased 3.5 times and pulmonary ventilation increased only to 1.8 times due to decrease in tidal volume. There was about 2 fold increase in alveolar ventilation in both the breeds, the increase in dead space ventilation was more in crossbreds than in Sahiwal. Behavioral symptoms exhibited by animals after exposure were profuse salivation, open mouth panting, tongue protrusion and general restlessness.

• 치과방사선
• /
• 제25권2호
• /
• pp.483-499
• /
• 1995

Mandibular first molars of the rats were undertaken to observe the radiosensitivity of amelogenesis. Twenty four Sprague-Dawley rats received 396cGy radiation with the MK Cell irradiator using Cs-137, and twenty four rats served as control. They were devided into two groups; Group 1 which received radiation at the 14th day after gestation and group 2 which received radiation at the 19th day after gestation. Light Microscopy and Transmitted Electron Microscopy investigation was undertaken in the group 1 at the 15th, 18th, 20th, 22nd(2 days after birth), and 25th day(5 days after birth) after gestation, and in the group 2 at the 21th(birth day), 22nd(2 days after birth), and 25th(5 days after birth) day after gestation. The following histopathologic findings were obtained. 1. Compared with control group, experimental group showed a delayed formation of enamel and dentin due to slow rate of differentiation of undifferentiated mesenchymal cells. 2. In the experimental groups, the arrangement of the inner enamel epithelium was irregular and there were many vacuoles in the cytoplasm. There were dilated rER and mitochondria, increase of the intercellular space, and loss of the cellular polarity. 3. In the group 1, early enamel without Tomes' process, and early organic matrix was observed at the 25th day after gestation. 4. In the group 2, histopathologic changes were similar to those of the group 1, but the degree of changes was more severe than that of the group 1.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2603-2607
• /
• 2009

$LiNi_{0.5-x}Co_{2x}Mn_{0.5-x}O_{2}$ (x = 0, 0.1, 1/6, 1.2, 0.3) were synthesized by the solid-state reaction method. The crystal structure was analyzed by X-ray powder diffraction and Rietveld refinement. $LiNi_{0.5-x}Co_{2x}Mn_{0.5-x}O_{2}$ samples give single phases of hexagonal layered structures with a space group of R-3m for x = 0.1, 1/6, 0.2, and 0.3. The lattice constants of a and c-axis were decreased with the increase in Co contents in samples. The thickness of MO2 slab was decreased and inter-slab distance was increased with the increase in Co contents in $LiNi_{0.5-x}Co_{2x}Mn_{0.5-x}O_{2}$. According to XPS analysis, the valence states of Mn, Co, and Ni in the sample are mainly +4, +3, and +3, respectively. The discharge capacity of 202 mAh/g at 0.1C-rate in the potential range of 4.7 - 3.0 V was obtained in $LiNi_{0.3}Co_{0.4}Mn_{0.3}O_2$ sample, and $LiNi_{0.4}Co_{0.2}Mn_{0.4}O_2$ gives excellent cycle performance in the same potential range.

• 대한구강악안면임플란트학회지
• /
• 제22권4호
• /
• pp.242-254
• /
• 2018

The aim of the current study was to evaluate the results of horizontal guided bone regeneration (GBR) with xenograf t (deproteinized bovine bone mineral, DBBM), allograf t (irradiated allogenic cancellous bone and marrow), titanium membrane, resorbable collagen membrane, and advanced platelet-rich fibrin (A-PRF) in the anterior maxilla. The titanium membrane was used in this study has a three-dimensional (3D) shape that can cover ridge defects. Case 1. A 32-year-old female patient presented with discomfort due to mobility and pus discharge on tooth #11. Three months after extracting tooth #11, diagnostic software (R2 GATE diagnostic software, Megagen, Daegu, Korea) was used to establish the treatment plan for implant placement. At the first stage of implant surgery, GBR for horizontal augmentation was performed with DBBM ($Bio-Oss^{(R)}$, Geistlich, Wolhusen, Switzerland), irradiated allogenic cancellous bone and marrow (ICB $cancellous^{(R)}$, Rocky Mountain Tissue Bank, Denver, USA), 3D-titanium membrane ($i-Gen^{(R)}$, Megagen, Daegu, Korea), resorbable collagen membrane (Collagen $membrane^{(R)}$, Genoss, Suwon, Korea), and A-PRF because there was approximately 4 mm labial dehiscence after implant placement. Five months after placing the implant, the second stage of implant surgery was performed, and healing abutment was connected after removal of the 3D-titanium membrane. Five months after the second stage of implant surgery was done, the final prosthesis was then delivered. Case 2. A 35-year-old female patient presented with discomfort due to pain and mobility of implant #21. Removal of implant #21 fixture was planned simultaneously with placement of the new implant fixture. At the first stage of implant surgery, GBR for horizontal augmentation was performed with DBBM ($Bio-Oss^{(R)}$), irradiated allogenic cancellous bone and marrow (ICB $cancellous^{(R)}$), 3D-titanium membrane ($i-Gen^{(R)}$), resorbable collagen membrane (Ossix $plus^{(R)}$, Datum, Telrad, Israel), and A-PRF because there was approximately 7 mm labial dehiscence after implant placement. At the second stage of implant surgery six months after implant placement, healing abutment was connected after removing the 3D-titanium membrane. Nine months after the second stage of implant surgery was done, the final prosthesis was then delivered. In these two clinical cases, wound healing of the operation sites was uneventful. All implants were clinically stable without inflammation or additional bone loss, and there was no discomfort to the patient. With the non-resorbable titanium membrane, the ability of bone formation in the space was stably maintained in three dimensions, and A-PRF might influence soft tissue healing. This limited study suggests that aesthetic results can be achieved with GBR using 3D-titanium membrane and A-PRF in the anterior maxilla. However, long-term follow-up evaluation should be performed.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2001년도 춘계학술발표대회
• /
• pp.22-22
• /
• 2001

To produce reconstituted rabbit embryos with fetal fibroblasts, the present study was evaluated the efficiencies of the different fusion and activation conditions as assessments of subsequent development and chromosome in the embryos. New Zealand White rabbits were used throughout the study. Fetal fibroblasts collected from 22-d of fetuses were cultured in DMEM ＋ 10% FBS in 5% $CO_2$ in air. The culture was maintained for 10 passages. In every passage half of cell suspension were kept In frozen. From rabbits treated with FSH in 30% PVP solution and hCG, oocytes were surgically collected from oviducts at 14 h post-hCG injection and stripped off their cumulus cells by re-pipetting in a 300 IU hyaluronidase solution. Oocytes with an extruded first polar body and dense cytoplasm were enucleated by micromanipulation in Ham's F-10 medium＋7.5 g/$m\ell$ cytochalasin B. Euncleation was confirmed under a fluorescence microscope after staining with 5 g/$m\ell$ bisbenzimide for 2 min. Each enucleated oocyte was injected with a fetal fibroblast into a perivitelline space. Reconstructed eggs were compared fusion rates either at 2.0 ㎸/cm or 1.6 ㎸/cm(60 sec, double pulses). After fusion, all eggs were activated with the combination of 5 M ionomycin (5 min) and 10 g/$m\ell$ cycloheximide (CHX, 3h), and cultured in CRlaa medium and transferred into TCM199＋10% FBS on day 3. Although there was not significantly differ in fusion rate between treatments (60%, 2.0 ㎸/cm vs. 79.4%, 1.6 ㎸/cm), none of them in the eggs fused with 2.0 ㎸/cm developed to blastocyst. In comparison of development and chromosome status between different activation treatments (Group 1; 5 M ionomycin/10 g/$m\ell$ CHX, Group 2; 5 M ionomycin/5 g/$m\ell$ CHX ＋ 2 mM DMAP after fusion with 1.6 ㎸/cm), there were not differ in cleavage and development rates (67.3% and 28.9% in Group 1; 67% and 33% in Group 2). All out of 8 embryos evaluated in Group 1 appeared a normal diploid chromosome sets and mean number of cells (Mean SEM) on day 4.5 of culture was 141.5 23.15 (n=8). It can be concluded that the use of cycloheximide has not happened in chromosome abnormalities, and fetal fibroblasts can be used for cloning in rabbit.