• 기술혁신학회지
• /
• 제2권2호
• /
• pp.201-218
• /
• 1999

The article contains an introduction of possibility of applying Multi-Attribute Utility Theory(MAUT) for priority setting of R&D projects. MAUT is compared with AHP, which is widely used recently. These two techuiques are applied to set priorities of R&D projects In a Government-funded Research Institute. Six criteria are chosen from consultation with decision makers. They are composed of 1) validity as representative projects, 2) possibility of resource mobilization, 3) spillover effect of developed technologies, 4) possibility of success, 5) scope of participation and 6) clarity of research goal. To set priorities of R&D projects, SMART(Simple MultiAttribute Rating Technique) and DVM(Difference Value Measurement) out of many MAUT methods are used to design the utility function and to determine the weights among criteria. The aggregation model is additive on the assumption the criteria are independent. AHP executes pairwise comparisons for criteria and alternatives. From the results of the case study, the results and theoretical characteristics are compared.

• 한국농공학회논문집
• /
• 제52권1호
• /
• pp.1-11
• /
• 2010

Generation and transportation of runoff and pollutant loads within watershed generated eutrophication at Daecheong reservoir. To improve water quality at Daecheong reservoir, the best management practices should be developed and applied at upper watersheds for water quality improvement at downstream areas. In this study, two small watersheds of upper Daecheong reservoir were selected. The Long-Term Hydrologic Impact Assessment (L-THIA) model has been widely used for the estimation of the direct runoff worldwide. To apply the L-THIA ArcView GIS model was evaluated for direct runoff and water quality estimation at small watershed. And the Web-based Hydrograph Analysis Tool (WHAT) was used for direct runoff separating from total flow. As a result, the $R^2$ (Coefficient of determination) value and Nash-Sutcliffe coefficient value for direct runoff comparison at An-nae watershed were 0.81 and 0.71, respectively. And the $R^2$ value and Nash-Sutcliffe coefficient value at Wol-oe were 0.95 and 0.93. The $R^2$ value of BOD, TOC, T-N and T-P at An-nae watershed were BOD 0.94, TOC 0.81, T-N 0.94 and T-P 0.89. And the $R^2$ value of BOD, TOC, T-N and T-P at Wol-oe watershed were BOD 0.80, TOC 0.93, T-N 0.86 and T-P 0.65. The result that estimated pollutant loadings using the L-THIA ArcView GIS model reflected well the measured pollutant loadings except for T-P in Wol-oe watershed. With L-THIA ArcView GIS model, the direct runoff and non-point pollutant (NPS) loadings in the watershed could be analyzed through simple input data such as daily rainfall, land uses, and hydrologic soil group.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.152-157
• /
• 2005

This experimental study was devoted to investigate skin friction of H group piles with uplift loading conditions in granite soil under laboratory test. Model piles made of steel embedded in weathered granite soil were used in this study. Pile arrangements($2{\times}2,\;3{\times}3$), pile space(2D, 4D, 6D), and soil density($D_r=40%,\;80%$) were tested. The main results obtained from the model tests can be summarized as follows. The series of tests found that ultimate uplift load and displacement for group piles were increased as piles space ratio increases to $D_r=40%$ of soil density. In the relative density of $D_r=80%$, bearing capacity for group piles was greater than for single pile. In the relative density of $D_r=40%$, the theoretical value of skin friction for group piles was greater than practical value. In the relative density of $D_r=80%$, both theoretical and practical value of skin friction for group piles were increased as piles space ratio increases.

• 한국식품위생안전성학회지
• /
• 제10권2호
• /
• pp.97-102
• /
• 1995

For improved preservation of boiled-dried anchovies, the current preservation method of corrugated-cardboard box packaging and freezing below -18$^{\circ}C$ was compared to the nylon/polyethylene(NY/PE) packaging along with cooling temperature ranging from 5$^{\circ}C$ to 1$0^{\circ}C$ as well as ambient condition for eight months by determining physicochemical quality of stored samples. Lipid oxidation of stored anchovies and their browning increased with storage time. The phenomenon was delayed under the conditions of lower temperature and air-tight packaging. As quality-indicative criteria of stored anchovies, carbonyl value(r=-0.989), browning (r=-0.949) and color a value(r=-0.989), browning(r=-0.965), Hunter's color b value(r=-0.949) and color a value(r=-0.940) showed a highly-negative correlations with organoleptic qualities of the samples. Based on the above results, air-tight packaging in a laminated film and subsequent storage at cooling temperature was found to be a possible alternative to the current freezing-storage of boiled-dried anchovies from the physicochemical point of view.

• 대한전자공학회논문지
• /
• 제16권3호
• /
• pp.9-18
• /
• 1979

본 논문에서는 바나디움 주화물을 사용한 새로운 반도체 소자인 C.T.R을 제조하여 그외 전기적 특성을 조사하였다. 그 실험결과는 다음과 같다. (1) 제조될 C.T.R의 저항급변계수 는 3정도였고, (2) 의 값은 환원시간과 급냉시간에 크게 의존하였으며, (3) 의 큰 값을 갖는 C.T.R은 짧은 switching현상을 갖는다.

• Asian Journal of Innovation and Policy
• /
• 제3권2호
• /
• pp.245-261
• /
• 2014

Knowledge, technology and information have special characteristics different from the ones of normal consumer products and services. Especially the value of such information varies according to external elements such as the provided environment, their method of utilization, and the level and purpose, etc. of the user. In this study, the indicators of information customer value are developed and measured to enhance customer-based values with efforts for making new customers and maintaining existing customers. The result is as follows: 14 customer value indicators were developed. Among the indicators, value gained versus effort, reduced time for research idea investigation and savings in time searching for equipment, and tools and materials got the highest score, which means that time-saving effects were the most important. The field study of this paper was conducted from information users in the field of national R&D, and thus future studies could be conducted in various industries in many countries to attain generalized results.

• Archives of Pharmacal Research
• /
• 제26권12호
• /
• pp.997-1001
• /
• 2003

This paper deals with chiral enzymatic resolution of 4-arylthio-2-butanols by lipase to prepare potential intermediates of $\beta$-lactam antibiotics. Among several lipases employed, lipase P type enzyme gave the highest ee value to prepare (R)-4-arylthio-2-butyl acetate. The enzymatic resolution of phenyl substituted alcohol (6a) using lipase P showed the highest ee value (99.7%) among those of 4-arylthio-2-butanol derivatives. Lipase P mediated hydrolysis of acylester 7a gave also (R)-alcohol 6a selectively. For determination of enantiomeric purity of these enzymatic resolved analytes, liquid chromatographic analysis was performed using two coupled Chiralcel OD and (R,R)-WhelkO chiral column.

• 미생물학회지
• /
• 제5권2호
• /
• pp.93-96
• /
• 1967

Especially, we mainly dealt on the isolation of mold in the sample of the Korean products, Kock Ja. The kinds of the isolated strain are such as these, Rhizopus, Mucor, Aspergillus oryzae sp., aspergillus niger sp., Penicillum and Flungi Imperfecti. The action of the starch saccharification of isolated strain and the order of liquefying action are follows: The saccharification power was R-l>R-2>M-2> Kock Ja>M-1>O-2>N-1>O-4 The liquefying power was R-1, R-2>0-2>0-4>M-2, Kock Ja>M-1>N-1 We compared the pH's saccharification curve of each kind of strain with Kock Ja. The most suitable pH value of R-1, R-2 was the closest to pH 4. 0, close value with Kock Ja. The Rhizopus species on the saccharification action of each kind of strain in regard to raw wheat starch was stronger than other kinds of strain. We think that to generalize the above result, the Rhizopus species consists of an important strain of this Kock Ja, and is an important factor for the saccharification action of Kock Ja and the existence of Mucor species as well.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.645-661
• /
• 1995

As the mechanical property of composite resin improved, composite resin has been widely used esthetic dentistry. In the field of esthetic dentistry, the color of prosthetic material is very important. The purpose of this study was to evaluate the color difference of specimens, by the types of alloys and gold electrodeposit. Experimental groups were as follows : Group Prec : Au-Pt alloy with no gold coating and no resin veneer. Group Semi : Pd-Ag alloy with no gold coating and no resin veneer. Group BAse : Ni-Cr alloy with no gold coating and no resin veneer. Group Gsem : Pd-Ag alloy with no gold coating and no resin veneer. Group Gbas : Ni-Cr alloy with no gold coating and no resin veneer. Group PreR : Resin veneer on the Pd-Ag alloy without gold coating. Group SemR : Resin veneer on the Pd-Ag alloy without gold coating. Group GbsR : Resin veneer on the Ni-Cr alloy with gold coating Group BasR : Resin veneer on the Ni-Cr alloy without gold coating. In this study, colors of metal surfaces and veneered resins were evaluated by the CIE $L^{*}a^{*}b$ system. The results obtained were as follows : 1. different alloy types and gold coating make the $L^{*}a^{*}b$ system. 2. The ${\Delta}E^*$ab value between groups semi and Base was less than 1.5 and there was no $a^*$ and $b^*$ value difference between groups Gsem and Gbas 3. The values of $L^*$ and $a^*$ ain groups GsemR and GbasR were so similar that the ${\Delta}E^*$ab value was as small as 0.58. 4. In resin specimens with gold coated semiprecious or base alloys showed yellower and redder deviation than the resin specimens with precious alloy. 5. The ${\Delta}E^*$ab values between goups PreR-GsemR and groups PreR-GbasR were as small as 2.68 and 2.22 respectively.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.407-413
• /
• 2002

Eutectic high chromium cast irons containing 17%Cr and 26%Cr were produced for this research by making each of them solidify unidirectionally. Abrasion wear test against SiC or $Al_2$O$_3$bonded paper was carried out using test pieces cut cross-sectionally at several distances from the chill face of castings. The wear resistance was evaluated in connection with the parameters such as eutectic colony size($E_w$), area fraction of boundary region of the colony($S_B$) where comparatively large massive chromium carbides are crystallized and, average diameter of chromium carbides in the boundary region($D_c$). The wear rate($R_w$), which is a gradient of straight line of wear loss versus testing time, was influenced by the type and the particle size of the abrasives. The $R_w$ value against SiC was found to be larger than that against A1$_2$O$_3$under the similar abrasive particle size. In the case of SiC, the $R_w$ value increased with an increase in the particle size. The $R_w$ value also increased as the eutectic colony size decreased, and that of the 17%Cr iron was larger than that of the 26%Cr iron at the same $E_w$ value. Both of the $S_B$ and $D_c$ values were closely related to the $R_w$ value regardless of chromium content of the specimens. The $R_w$ values of the annealed specimens were greater than those of the as-cast specimens because of softened matrix structures. As for the relationship between wear rate and macro-hardness of the specimens, the hardness resulting in the minimum wear rate was found to be at 550 HV30.