• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.371-378
• /
• 1996

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.66.2-66
• /
• 2000

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.378-384
• /
• 1995

Effects of $La_2O_3$, $MnO_2$ on the dielectric and piezoelectric properties of $0.02Pb(Y_{2/3}W_{1/3}O_3-0.98Pb(Zr_{0.52}Ti_{0.48})O_3$ system were investigated. The addition of La2O3 to the system enhanced electromechanical coupling factor (kp), piezoelectric constant (d33), but hardly changed mechanical quality factor (Qm). On the other hand, the addition of $MnO_2$ increased Qm significantly, but did not degrade kp and d33 so much. The piezoelectric properties of $0.02Pb(Y_{2/3}W_{1/3}O_3-0.98Pb(Zr_{0.52}Ti_{0.48})O_3$ containing 0.1wt% $La_2O_3$, 0.4wt% $MnO_2$ were very good and kp, d33, Qm were 55%, 350$\times$10-12C/N, 780, respectively. The size of the grains was proportional to the change of c/a (tetragonality) ratio caused by the addition of $La_2O_3$ and $MnO_2$, and dielectric, piezoelectric properties were sensitive to the amountof pyrochrole phase.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.30.1-30.1
• /
• 2009

PZT(Pb(Zr, Ti)$O_3$ 압전세라믹스는 뛰어난 압전 특성과 강유전 특성을 가지고 있어서 현재 널리 사용되고 있다. 하지만 PZT세라믹스는 큐리온도 이상에서 그 특성을 잃게 되고 높은 온도에서의 응용이 제한된다. 따라서 높은 큐리온도를 가지는 압전체를 개발하기 위한 연구가 많이 이루어지고 있다. $PbTiO_3$의 경우에는 $Bi(Zn_{0.5}Ti_{0.5})$, $BiFeO_3$등의 Bi계 세라믹스를 치환하면서 큐리온도가 올라가는 결과가 보고되고 있다. 하지만 이것은 PZT세라믹스 보다 압전 및 유전 특성이 상당히 낮다. 따라서 본 연구에서는 $(1-x)PbZrO_3-xPbTiO_3$조성에 Bi(Me)$O_3$(Me:Zn, Ti, Fe, Al)를 치환하여 압전특성 및 강유전 상전이 온도를 조사하였다. 모든 시편들은 고상반응법으로 제조하였고, 제조한 시편으로 조성에 따른 압전특성 및 유전특성의 변화를 측정하였다. 그리고 이를 통해 큐리온도는 PZT의 MPB조성근처에서 Bi계 세라믹의 치환은 $T_C$가 낮아 졌으나, Tetragonal 상을 가지고 있는 Ti-rich인 조성에서는 $T_C$가 높아지는 것을 관찰하였다.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.102-109
• /
• 2000

When PbZrO3 (PZ) and PbTiO3 (PT) particles were scattered on polished surfaces of sintered Pb(Zr0.52Ti0.48)O3 (PZT; Zr/Ti=1.08) and then annealed, the PZT grain boundaries migrated. Near the scattered particles, grain boundaries were corrugated and thus the grain shape changed from a normal one to irregular ones. Especially, near the scattered PZ particles, fast grain growth occurred. In the regions swept by moving grain boundaries, the Zr/Tiratio was measured to be about 1.35 for of PZ scattering and about 0.8 for PT scattering, respectively. This result indicates that the grain boundary migration was induced by alloying of Zr and Ti ions in PZT grains, as in usual diffusion induced grain boundary migration(DIGM). A calculation showed that higher coherency strain energy was induced for PT scattering because of higher alloying of Ti than of Zr.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05a
• /
• pp.98-98
• /
• 1992

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05b
• /
• pp.115-116
• /
• 1992

• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.461-466
• /
• 1997

Dielectric and piezoelectric properties of (Pb1-1.5xLnx)(Ti0.98Mn0.02)O3 ceramics with x=0~0.2 have been investigated. Pb(Ti0.98Mn0.02)O3 showed poor sinterability and cracking on cooling, but the substitution of Nd3+ ions into Pb2+ sites resulted in dense microstructures without cracking through reducing crystallographic anisotropy. The Nd3+ substitution, however, deteriorated the temperature stability of the piezoelectric properties because of lowering the Curie point. Electromechanical anisotropy(Kt/Kp) indicated a maximum value of 10 when x=0.1. This result might be attributed to the counteracting effects that with increasing x, the lattice anisotropy decreases while the poling becomes easier due to the increase in O2- vacancy concentration. Thickness-shear mode resonators with (Pb0.85Nd0.1)(Ti0.98Mn0.02)O3 composition showed good resonant characteristics around 4.5 MHz.

• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.391-398
• /
• 1996

In order to understand the electrostrictive behavior of Pb(Mg1/3Nb2/3)O3-PbTiO3(PMN-PT) solid solutions the dielectric constants and the electric-field-induced strains in (1-x)PMN-xPT (x=0.0-0.4) were investigated in the temperature range -5$0^{\circ}C$-20$0^{\circ}C$. Powder of (1-x)Pb(Mg2/3Nb2/3)O3-xPbTiO3 (x=0.0, 0.1, 0.2, 0.3, 0.35, and 0.4) were prepared from the oxide forms of Pb, Mg, Nb and Ti via a columbite precursor method As the amount of PbTiO3 increases the temperature of maximum dielectric constant(T$\varepsilon$max) increases and the phase transition become less diffusive. The strain maximum occurs only when the diffuse phase transition occurs from rhombohedral to cubic or rhombohedral to tetragonal as in x=0.1-0.35 The strains monotonically decrease with temperature in the materials in which phase transition occurs from tetragonal to cubic as in x=0.4.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.169-170
• /
• 2005

본 연구에서는 초음파 센서에 응용 가능한 $0.4Pb(Ni_{1/3}Nb_{2/3})O_3-0.6Pb(Zr_xTi_{1-x})O_3+0.5Wt%$ $MnO_2$ 세라믹스에 Zr/(Ti+Zr)비를 0.37에서 0.41로 변화시킨 조성을 1175 $\sim$ 1200$^{\circ}C$ 온도에서 소결하여 이의 결정구조 및 미세조직을 분석하였고, 압전, 유전 특성을 고찰하였다. 본조성에서 x=0.385 조성에서 최대 유전상수 값 3490 이 나타났으며, 그 이상의 첨가에서는 감소하였다. 상경계 영역인 x=0.385 조성에서 $\varepsilon$r, $K_p$, $d_{33}$ 값이 최대값을 나타내었다. $0.4Pb(Ni_{1/3}Nb_{2/3})O_3-0.6Pb(Zr_xTi_{1-x})O_3+0.5Wt%$ $MnO_2$, 세라믹스에서는 kp 와 $d_{33}$ 는 Zr/(Ti+Zr)비 0.385조성까지 증가하였다가 그 이상 조성에서 감소하였다. $1175^{\circ}C$에서 2시간 소결한 x=0.385조성에서 $\varepsilon$r=3490, kp=0.71, Qm=476의 우수한 압전 특성을 나타내었다.