• 대한환경공학회지
• /
• 제30권7호
• /
• pp.712-720
• /
• 2008

호소나 하천바닥의 퇴적물에는 많은 양의 미량 금속이 함유되어 있으며, 퇴적물과 간극수 사이에는 미량 금속들의 교환이 일어난다. 간극수로 이동된 미량 금속들은 쉽게 수환경으로 확산되어 수생태계에 독성을 유발한다. 그러나 이러한 미량 금속들은 존재형태에 따라 수생물에 미치는 독성이 다르다. 따라서 본 연구에서는 경포호 등 10개의 동해안 석호에 대한 퇴적물의 간극수를 분석하고 화학종 분포 예측 프로그램(MINTEQA2)을 이용하여 미량 금속들의 존재형태를 예측하여 수환경에서의 독성여부를 확인하였다. 퇴적물에서 추출한 간극수의 미량 금속 분석결과를 예측 결과, K와 Na는 자유이온형태로 존재하고 있었으며, Al, As 및 Cr 등은 자유이온 형태를 비롯한 3$\sim$4개의 착물을 형성하였고 Ca, Co, Cd, Ni, Pb 및 Zn 등은 10개 이상의 다양한 착물을 형성하였다. 염분도가 높은 청초호 등(Group I호소)은 Cd, Co, Ni, Pb, Hg 및 Zn이 주로 염화 착물을 형성하였으며, Fe, Mn 및 Mg는 황산화 착물을 형성하였다. 그러나 염분농도가 낮은 천진호 등(Group II호소)은 Hg와 Cd가 염화 착물을 형성하였으며, Cu, Mg, Mn, Ni, Pb 및 Zn는 황산화 착물을 형성하였다. Fe는 Fe(OH)$_2{^+}$, Fe(OH)$_3$(aq) 등의 수산기 착물을 형성하였다. 또한 염분농도와 상관없이 Al, As 및 Cr은 전체 호소에서 수산기 및 산화형태의 착물을 형성하였다. 대부분 호소의 간극수에 존재하는 미량 금속들은 자유이온(M$^{x+}$)형태로 존재하고 있었으며, 그 외에 M$^{x+}$ + xCl$^-$와 M$^{2+}$ + SO$_4{^{2-}}$의 착물을 형성하고 있어 수환경으로 확산될 경우 생태계 독성 및 축척을 일으킬 것으로 생각된다.

• Membrane and Water Treatment
• /
• 제11권1호
• /
• pp.41-48
• /
• 2020

Lead is a highly toxic heavy metal that causes serious health problems. Nonetheless, it is increasingly being used for industrial applications and is often discharged into the environment without adequate purification. In this study, Pb(II) was removed by powdered waste sludge (PWS) based on the biosorption mechanism. Different PWSs were collected from a submerged moving media intermittent aeration reactor (SMMIAR) and modified Ludzack-Ettinger (MLE) processes. The contents of extracellular polymeric substances were similar, but the surface area of MLE-PWS (2.07 ㎡/g) was higher than that of SMMIAR-PWS (0.82 ㎡/g); this is expected to be the main parameter determining Pb(II) biosorption capacity. The Bacillaceae family was dominant in both PWSs and may serve as the major responsible bacterial group for Pb(II) biosorption. Pb(II) biosorption using PWS was evaluated for reaction time, salinity effect, and isotherm equilibrium. For all experiments, MLE-PWS showed higher removal efficiency. At a fixed initial Pb(II) concentration of 20 mg/L and a reaction time of 180 minutes, the biosorption capacities (q_e) for SMMIAR- and MLE-PWSs were 2.86 and 3.07 mg/g, respectively. Pb(II) biosorption using PWS was rapid; over 80% of the maximum biosorption capacity was achieved within 10 minutes. Interestingly, MLE-PWS showed enhanced Pb(II) biosorption with salinity values of up to 30 g NaCl/L. Linear regression of the Freundlich isotherm revealed high regression coefficients (R² > 0.968). The fundamental Pb(II) biosorption capacity, represented by the K_F value, was consistently higher for MLE-PWS than SMMIAR-PWS.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.41-50
• /
• 2000

Cement-bonded particleboard is being used as outdoor siding material all over the world, because this composite particularly bears a light weight, high resistance against fire, decay, and crack by cyclic freezing and thawing, anti-shock property, and strength enhancement. Construction systems are currently changing into a frame-building style and wooden houses are being constructed with prefabrication type. Therefore, they require a more durability at outdoor-exposed sides. In this study, the cement hydration property for Korean pine particle, Japanese larch particle and face- and middle layer particles (designated as PB particle below) used in Korean particleboard-manufacturing company was investigated, and the rapid manufacturing characteristics of cement-bonded particleboard by supercritical $CO_2$ curing was evaluated. Korean pine flour showed a good hydration property, however, larch flour showed a bad one. PB particle had a better hydration property than larch flour. The addition of $Na_2SiO_3$ indicated a negative effect on hydration, however, $MgCl_2$ had a positive one. Curing by supercritical $CO_2$ fluid gave a conspicuous enhancement in the performances of cement-bonded particleboards compared to conventional curing. $MgCl_2$ 3%-added PB particle had the highest properties, and $MgCl_2$ 1%-added Korean pine particle had the second class with the conditions of cement/wood ratio of 2.7, a small fraction-screened particle and supercritical curing. On the contrary, the composition of non-hammermilled or large fraction-screened particle at cement/wood ratio of 2.2 was poorer. Also, the feasibility for actual use of 3%-added, small PB particle-screened fraction was greatest of all the conventional curing treatments. Relative superiority of supercritical curing vs. conventional curing at dimensional stability was not so apparent as in strength properties. Through the thermogravimetric analysis, it was ascertained that the peak of a component $CaCO_3$ was highest, and the two weak peaks of calcium silicate hydrate and ettringite and $Ca(OH)_2$ were present in supercritical treatment. Accordingly, it was inferred that the increased formation of carbonates in board contributes to strength enhancement.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.112-119
• /
• 2009

The purpose of this study is to evaluate the evaluation of process yield performed by using Sn & Cu treatment on the surface to optimize process condition for Lead-free solder application. The materials which are used for the New Surface Treatment study are Semi-Dulling plating for high speed Sn/Cu alloy of Soft Alloy GTC-33 Pb free known as "UEMURA Method" and plating substrate is alloy 42.Especially in lead-free plating process, it is important to control plating thickness and Copper composition than Sn/Pb plating. Evaluated and controlled plating thickness $12{\pm}3um$, Copper composition $2{\pm}1%$, plating particle and visual inspection. The optimization of these parameters and condition makes it makes possible to apply Sn/Cu Lead-free solder from Sn/Pb alloy.

• 산업식품공학
• /
• 제21권2호
• /
• pp.180-186
• /
• 2017

Salt, as food, is the most essential element for human survival due to its significant physiological functions. Here, we report the simultaneous detection of Pb and Cd in sea salt by square wave anodic stripping voltammetry (SWASV). Stripping voltammetric measurements were conducted using a manufactured rotating disk electrode system (MRDES). The detection limit was $3.6{\pm}0.18{\mu}gL^{-1}$ for Pb and $3.9{\pm}0.37{\mu}gL^{-1}$ Cd in NaCl solution. When the pH increased from 5.5 to 8.5, the peak currents of Pb and Cd decreased. At a pH of 8.3, the ratio of the current drop compared with that at a pH of 5.5 was 0.6 for Pb and 0.73 for Cd. The concentrations corrected by the current drop are in agreement with the concentrations obtained with ICP (inductively coupled plasma). This system demonstrates the reliable detection of heavy metals in aqueous media and, at a high $Na^+$ concentration, the successful application for the determination of Pb and Cd in sea salts.

• 분석과학
• /
• 제9권3호
• /
• pp.253-261
• /
• 1996

무기시료 중에 게르마늄의 DPP에 의한 미량 분석법이 연구되었다. 1, 2, 3-트리하이드 록시벤젠이 함유된 과염소산 용액 중에 게르마늄(IV)의 환원 피크가 -0.45V(기준전극 Ag/AgCl)에서 나타났고, 이 피크의 높이는 농도에 직선성을 보였다. 게르마늄 분석시에 감도 및 정밀도에 영향을 주는 인자들이 조사되었고, 최적 조건하에서 검출한계는 1ng/ml였다. 무기물 시료들은 potassium pyrosulfate를 사용한 용융법으로 분해하였다. 게르마늄 검출시 Se(IV), Pb(II), As(III)의 간섭에 대한 조사가 있었고, 이들 간섭은 10M HCl용액 중에서 $CCl_4$로 추출함으로써 해결할 수 있었다. 무기물 시료들 (Pb bf. dust, Cu bf. dust, 편마암, Cu anode slime)중의 게르마늄 함량은 위의 방법으로 정량되었다.

• Carbon letters
• /
• 제13권3호
• /
• pp.167-172
• /
• 2012

Most heavy metals are well-known toxic and carcinogenic agents and when discharged into wastewater represent a serious threat to the human population and the fauna and flora of the receiving water bodies. The present study aims to develop a procedure for Pb (II) removal. This procedure is based on using powdered activated carbon, which was prepared from walnut shells that were generated as plant wastes and modified with potassium carbonate and phosphoric acid as chemical agents. The main parameters, such as effect of pH, effect of sorbent dosage, Pb (II) concentrations, and various contact times influence the sorption process. The experimental results were analyzed by using Langmuir, Freundlich, Tempkin, and Dubinin-Radushkevich adsorption models. The kinetic study of Pb (II) on activated carbon from walnut shells was performed based on pseudo- first order and pseudo- second order equations. The data indicate that the adsorption kinetics follow the pseudo- second order rate. The procedure was successfully applied for Pb (II) removal from aqueous solutions.

• 한국식품영양과학회지
• /
• 제43권8호
• /
• pp.1248-1256
• /
• 2014

자죽염(purple bamboo salt; PBS)을 제조하는 공정에 영향을 미치는 원염(갯벌천일염, MSS; 죽염, BS)의 종류, 대나무 첨가에 따른 BS의 이화학적 특성, 황 화합물, 미네랄 함량 및 환원력을 비교 분석하고, 이를 통해 PBS에 함유된 $SO_2$와 산화환원전위(ORP)의 발생 원인을 분석하였다. BS를 고온에서 용융시켜 제조한 PBS에서 630 ppm의 $SO_2$가 검출되었다. PBS의 원료 염과 RB에서는 $SO_2$가 검출되지 않았으나, 염화물, 황산염류, 탄산염류와 대나무(RB)를 함께 탄화시켜 $SO_2$ 검출 원인을 확인한 결과 황산칼륨에 의해 782 ppm이 발생하였다. BS의 $SO_2$는 BSRB1(13.88)~BSRB4(109.13 ppm)에서만 발생하였고 $SO{_3}{^{2-}}$는 MSSRB4와 BSRB2~BSRB4에서만 발생하였으며, 시간이 경과함에 따라 증가되는 경향을 나타내었다. $SO_4{^{2-}}$는 시간이 지남에 따라 감소하는 경향을 나타내었으며 $SO_2$와 $SO_3{^{2-}}$가 많을수록 낮은 함량을 나타내었다. ORP는 모두 시간이 지남에 따라 증가하는 경향을 나타내었고 BS에서 더 높은 수준을 나타내었으며, BSRB4(-211.40 mV)에서 가장 높은 환원력을 나타내었다. 일반적 특성 중 불용분은 BS에서 더 높았으며 RB가 탄화되어 남은 물질들이 영향을 미친 것으로 판단된다. Ca, K, Mg의 경우 굽는 시간 경과에 따라 MSS는 감소, BS는 증가하는 경향을 나타내었다. BSRB4의 Ca는 1.4배, Mg는 1.5배 증가하였고 K 함량은 1.8배 더 높은 것으로 나타났다. 미량 미네랄은 굽는 시간 경과에 따라 MSS에서 Li, Al, Mn, Fe, Sr이 증가되었고, BS에서 Al, Fe, Ni가 증가하였다. 음이온(Cl, $NO_3$, Br)과 중금속(Pb, Cd, Hg, As)은 각 요인에 대한 영향을 받지 않았다. 결론적으로 BS의 기능성을 나타내는 환원력은 $SO_2$ 및 $SO_3{^{2-}}$와 같은 저분자 황화합물에 의한 것이며, 이는 한 번 굽는 과정을 거친 BS를 사용하고 이에 RB를 첨가하여 고온에서 용융하는 시간이 길수록 이들 황화물질이 많아져 환원력이 증가된다는 것을 의미하는 것이다.

• 한국물환경학회지
• /
• 제26권6호
• /
• pp.963-968
• /
• 2010

This study has carried out to evaluate the performance of direct and indirect oxidation electrode for the purpose of decolorization of Rhodamine B (RhB) in water. Four kinds of electrodes were used for comparison: Pt and JP202 (indirect oxidation electrode), Pb and boron doping diamond (BDD, direct oxidation electrode). The effect of applied current (0.5 ~ 2.5 A), electrolyte type (NaCl, KCl, HCl, $Na_2SO_4$ and $H_2SO_4$) and electrolyte concentration (0.5 ~ 2.5 g/L), solution pH (3 ~ 11) and initial RhB concentration (25 ~ 125 mg/L) were evaluated. Experimental results showed that RhB removal efficiency were increased with increase of current, NaCl dosage and decrease of the pH. However, the effect of operating parameter on the RhB removal were different with the electrode type. JP202 electrode was the best electrode from the point of view of performance and energy consumption. The order of removed RhB concentration per energy lie in: JP202>Pt>Pb>BDD.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2229-2237
• /
• 2012

The two chelates based on calix[4]arene and thiacalix[4]arene have been synthesized and used as neutral ionophores for preparing PVC based membrane sensor selective to $Ho^{3+}$ ion. The addition of potassium tetrakis(4-chlorophenyl)borate (KTpClPB) and various plasticizers, viz., NDPE, o-NPOE, DOP, TEP and DOS have been found to improve significantly the performance of the sensors. The best performance was obtained with the sensor no. 6 having membrane of $L_2$ with composition (w/w) ionophore (2%): KTpClPB (4%): PVC (37%): NDPE (57%). This sensor exhibits Nernatian response with slope $21.10{\pm}0.3mV/decade$ of activity in the concentration range $3.0{\times}10^{-8}-1.0{\times}10^{-2}M\;Ho^{3+}\;ion$, with a detection limit of $1.0{\times}10^{-8}M$. The proposed sensor performs satisfactorily over a wide pH range of 2.8-10, with a fast response time (5 s). The sensor was also found to work successfully in partially non-aqueous media up to 25% (v/v) content of methanol, ethanol and acetonitrile, and can be used for a period of 4 months without any significant drift in potential. The electrode was also used for the determination of $Ho^{3+}$ ions in synthetic mixtures of different ions and the determination of the arsenate ion in different water samples.