• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1335-1336
• /
• 2008

A compact diode-pumped microchip(DPM) green light source which consist of pump LD, $Nd:YVO_4$, KTP and a built-in thermoelectric element has been fabricated for laser projection display. The volume of the source is as small as $0.7\;cm^3$ and we obtained the output power of 25mW with the average electric power consumption in pump LD of 304mW which correspond to the electrical-to-optical efficiency of 7.8%. Another approach using quasi phase matching(QPM) technique has been attempted. We obtained the output power of 90mW of green beam with 350mW pumping of a $Nd:YVO_4$ laser with 20-kHz rep. rate and 10-ns pulse duration. Detailed characteristics and issues of the DPM and QPM green light sources will be addressed.

• 한국전기전자재료학회논문지
• /
• 제27권3호
• /
• pp.146-150
• /
• 2014

As a method of simple patterning of transparent conductive oxide (TCO) films deposited on flexible substrates, laser direct etching was carried out on TCO films sputtered on polycarbonate (PC) substrates. As a result of different binding energies in TCO films, indium tin oxide (ITO) and indium gallium zinc oxide (IGZO) were more easily etched than zinc oxide with different $Nd:YVO_4$ laser beam conditions.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 창립 20주년기념 특별학술발표회
• /
• pp.249-250
• /
• 2009

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.245-245
• /
• 2010

This paper and the rear passivation experiment was local back surface field Nd:$YVO_4$ green laser and the experiment was used performed to screen printing. Laser power 100%, with a fixed frequency for 60kHz Current of 29A and 30A were tested in two conditions. The point contact distances of 0.2mm, 0.4mm, 0.6mm, 0.8mm and 29A and 30A current conditions, it was found that is suitable for 0.4mm.

• 한국광학회지
• /
• 제14권3호
• /
• pp.292-297
• /
• 2003

최대 1.9 W의 레이저 다이오드 출력을 Nd:YV $O_4$결정 단면에 집속시키고 공진기 내부에 KTP 결정을 두어서 제2고조파 변환시켜 녹색광(532 nm) 레이저를 발생시켰다. 다이오드 레이저 스퍽트럼과 레이저 결정의 흡수 스펙트럼을 비교하여 최적의 다이오드 작동 온도를 찾았다. 공진기 길이와 출력경의 곡률을 변화시키면서 출력의 변화를 관측한 결과, 최대 80 ㎽의 녹색광 레이저 출력을 얻었으며 최대 출력을 내는 공진기 조건에서는 집속된 여기광의 직경과 TE $M_{00}$ 모드의 직경이 일치함을 알았다. 발생된 녹색광 레이저는 다중모드로 발진하였으며 출력 요동이 심하였다. 단일모드 발진을 시키기 위하여 브루스터 판과 에탈론 등을 사용하는 여러 가지 형태의 공진기를 시도하여 보았다. 실험 결과, 에탈론을 사용한 공진기에서 가장 큰 출력인 60 ㎽ 의 단일 종모드 출력을 얻었다. 단일모드로 발진하는 레이저의 출력 요동은 다중 모드에 비하여 1/10이하로 감소하였다.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.377-380
• /
• 2012

Laser direct patterning of indium tin oxide(ITO) is one of new methods of direct etching process to replace the conventional photolithography. A diode pumped Q-switched Nd:$YVO_4$ (${\lambda}$= 1,064 nm) laser was used to produce ITO electrode on various transparent oxide semiconductor films such as zinc oxide(ZnO). The laser direct etched ITO patterns on ZnO were compared with those on glass substrate and were considered in terms of the overlapping rate of laser beam. In case of the laser etching on double-layer, it was possible to obtain the higher overlapping rate of laser beam.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.582-588
• /
• 2018

A $Nd:YVO_4$ laser dual-end-pumped by a wavelength-locked 878.6 nm laser diode is presented. At the repetition rate of 500 KHz, the absorbed pump power of 58 W, an output power of 26.1 W at 1064 nm is obtained, corresponding to an optical-optical efficiency of 45%. The pulse width is 44.2 ns. Meanwhile, the effects of traditional 808 nm pumping and 878.6 nm dual-end-pumping on the output laser beam quality and pulse width are compared and analyzed in an experiment.

• 한국정밀공학회지
• /
• 제24권4호
• /
• pp.147-152
• /
• 2007

UV laser ablation of polyimide is a combination of photochemical and photothermal mechanism. Photochemical mechanism is that molecular bonds are broken by photon energy and photothermal is evaporation and melt expulsion. When the laser processing, the etching depth needs to be calculated for prediction of processing result. In this paper, in order to predict the laser etching depth of polyimide by UV laser with the wavelength of 355nm, the theoretical model which includes both the photothermal and the photochemical effect was introduced. The model parameters were obtained by comparing with experimental results. The 3rd harmonic $Nd:YVO_4$ laser system was used in the experiment. From these experimental and theoretical results, the laser ablation of a polyimide was verified to achieve the highest quality microstructure.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.298-302
• /
• 2008

We have developed a 270-W 15-kHz MOPA system based on side-pumped rod-type Nd:YAG gain modules. The master oscillator is a 3-W 15-kHz $TEM_{00}$ $Nd:YVO_4$ laser with a pulse duration of 30 ns. To preserve the high beam quality during the amplification, we use image relay and polarization rotation which can simultaneously compensate for thermal lensing and thermal birefringence generated in the rod-type gain modules. After the amplification to 270 W with six rod-type gain modules, the beam quality factor ($M^2$) of the amplified laser beam is 5-10, and the pulse duration is maintained at 30 ns.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.134-139
• /
• 2007

Usually nanosecond pulsed laser processing of metal is mainly affected by the thermal ablation. Many studies of the theoretical analysis and modeling to predict the laser ablation of metal are suggested on the basis of the photothermal mechanism at higher laser fluence. In this paper, we investigate the etching depth and laser fluence of laser ablation of copper foils and propose the simplified SSB Model(Srinivasan-Smrtic-Babu model) to study the photothermal effect of nanosecond pulsed laser ablation. The experimental results show that the photothermal ablation of the 355nm DPSS $NdYVO_{4}$ laser is useful to process the copper thin foils.