• Korean Journal of Materials Research
• /
• v.33 no.10
• /
• pp.400-405
• /
• 2023

Tb³⁺-doped CaNb₂O₆ (CaNb₂O₆:Tb³⁺) thin films were deposited on quartz substrates at a growth temperature of 300 ℃ using radio-frequency magnetron sputtering. The deposited thin films were annealed at several annealing temperatures for 20 min and characterized for their structural, morphological, and luminescent properties. The experimental results showed that the annealing temperature had a significant effect on the properties of the CaNb₂O₆:Tb³⁺ thin films. The crystalline structure of the as-grown CaNb₂O₆:Tb³⁺ thin films transformed from amorphous to crystalline after annealing at temperatures greater than or equal to 700 ℃. The emission spectra of the thin films under excitation at 251 nm exhibited a dominant emission band at 546 nm arising from the ⁵D₄→⁷F₅ magnetic dipole transition of Tb³⁺ and three weak emission bands at 489, 586, and 620 nm, respectively. The intensity of the ⁵D₄→⁷F₅ (546 nm) magnetic dipole transition was greater than that of the ⁵D₄→⁷F₆ (489 nm) electrical dipole transition, indicating that the Tb³⁺ ions in the host crystal were located at sites with inversion symmetry. The average transmittance at wavelengths of 370~1,100 nm decreased from 86.8 % at 700 ℃ to 80.5 % at an annealing temperature of 1,000 ℃, and a red shift was observed in the bandgap energy with increasing annealing temperature. These results suggest that the annealing temperature plays a crucial role in developing green light-emitting CaNb₂O₆:Tb³⁺ thin films for application in electroluminescent displays.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.5
• /
• pp.429-436
• /
• 2012

Mg and Mg-based alloys are regarded as strong candidate hydrogen storage materials since their hydrogen capacity exceeds that of known metal hydrides. One of the approaches to improve kinetic is addition of metal oxide. In this paper, we tried to improve the hydrogenation properties of Mg-based hydrogen storage composites. The effect of transition metal oxides, such as $Nb_2O_5$ on the kinetics of the Magnesium hydrogen absorption kinetics was investigated. $MgH_x$-5wt.% $Nb_2O_5$ composites have been synthesized by hydrogen induced mechanical alloying. The powder fabricated was characterized by X-ray diffraction (XRD), Field Emission-Scanning Electron Microscopy (Fe-SEM), Energy Dispersive X-ray (EDX), BET and simultaneous Thermo Gravimetric Analysis / Differential Scanning Calorimetry (TG/DSC) analysis. The Absorption / desorption kinetics of $MgH_x$-5wt.% $Nb_2O_5$ (type I and II) are determined at 423, 473, 523, 573 and 623 K.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.488-494
• /
• 1988

Effects of MnO2 addition on themicrostructure, dielectric and piezoelectric properties of Rhombohedral, Tetragonal and Morphotropic phase boundary(MPB) in Pb(Ni1/3Nb2/3)O3-PbTiO3-PbZrO3 system were investigated and respectively the amount of MnO2 addition was 0, 0.2, 0.5, 1.0, 3.0wt%. In the tetragonal region, compared with the Rhombohedral and Morpotropic phase boundary, Mechanical quality factor(Qm), Curie temperature(Tc) and Dissipation factor were promoted by addition of MnO2. According to the results of the microstructure, dielectric and piezoelectric properties, the solid solution range of MnO2 addition in this system was 0.2-0.5wt%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.7
• /
• pp.638-644
• /
• 2008

The effects of $Nb_2O_5$ and $MnO_2$ on the positive temperature coefficient of resistivity (PTCR) behavior of lead-free $Ba_{0.99}(Bi_{1/2}Na_{1/2})_{0.01}TiO_3$ (BaBiNT) ceramics were investigated in order to fabricate a PTC thermistor available at high temperature of > $120^{\circ}C$. In particular, 0.05 mol% $Nb_2O_5$ added BaBiNT ceramic, which has significantly increased Curie temperature (Tc) of $160^{\circ}C$, showed good PTCR behavior; low resistivity at room temperature $(\rho_r)$ of $80.1{\Omega}{\cdot}cm$, a high $\rho_{max}/\rho_{min}$ ratio of $5.65{\times}10^3$ and a large resistivity temperature factor (a) of 18.5%/$^{\circ}C$. Furthermore, the improved $\rho_{max}/\rho_{min}$ of $6.48{\times}10^4$ and a of 25.4%/$^{\circ}C$ along with higher $T_c$ of $167^{\circ}C$ despite slightly increased $\rho_r$ of $569{\Omega}{\cdot}cm$, could be obtained for the BaBiNT + 0.05 mol% $Nb_2O_5$ + 0.02 wt% $MnO_2$ ceramic cooled down at a rate of $200^{\circ}C/h$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.342-342
• /
• 2008

The low temperature sintering and microwave dielectric properties of ceramic/glass composites which were composed of ceramics in the $Bi_2(Zn_{1/3}Nb_{2/3})_2O_7$ and zinc borosilicate glass/bismuth-zinc borosilicate glass were investigated with a view to applying the microwave dielectrics to low temperature co-fired ceramics. The $Bi_2(Zn_{1/3}Nb_{2/3})_2O_7$ addition of 5 wt% ZBS and BZBS glass ensured a successful sintering below $900^{\circ}C$. In addition, pyrochlore phase was observed in the all composition. $Bi_2(Zn_{1/3}Nb_{2/3})_2O_7$ with 5 wt% BZBS glasss demonstrated 70 as the dielectric constant ($\varepsilon_r$), 2,500 GHz as the Q$\times$f value, and -40 ppm/$^{\circ}C$ as TCF.

• Journal of the Korean Ceramic Society
• /
• v.35 no.5
• /
• pp.458-464
• /
• 1998

Variations of reaction sequence of $Pb(Zn_{0.6}Mg_{0.4})_{1/3}Nb_{2/3}O_3$[PZMN] with precusor mixing methods were ex-amined using X-ray diffraction and dielectric characteristics. In the present study three different types of precursor mixing methods (oxide mixing PbO+$ZnNb_2O_6+MgNb_2O_6$[Zn+MN] and PbO+(Zn,Mg)$Nb_2O_6$[ZMN] precursor mixing) were adopted. When the oxide mixing method was used for the PZMN synthesis a Zn-rich perovskite phase and pyrochlore phase were formed. Compared with PbO+ZN+MN precursor mixing method the PbO-ZMN precursor led to a lowering of the formation temperature for perovskite sin-gle phase. These variation of composition and formation temperature of the perovskite phase were dis-cussed in terms of the difference in the solid-reaction requence between these three different types of pre-cursor mixing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.6
• /
• pp.517-523
• /
• 2008

The microwave dielectric properties of $LiNb_3O_8-TiO_2$ based ceramics with low firing agents, CuO, $Bi_2O_3$, $B_2O_3$, $SiO_2$, $TiO_2$, were investigated to improve the sintering condition for the LTCC system. According to the X-ray diffraction and SEM, the ceramics of $LiNb_3O_8-TiO_2$ with low firing agents showed no significant second phases within a range of experiments, and fine microstructures. By adding the low firing agents, the sintering temperature decreased from $1200^{\circ}C$ to $925^{\circ}C$. Based on the results of electrical measurements, the $LiNb_3O_8-TiO_2$ ceramics showed a promising microwave dielectric properties for LTCC applications, those are ${\varepsilon}_r$ (dielectric constant) = 44, Q f (quality factor) = 18000, and ${\tau}_f$ (the temperature coefficient of resonant frequency) = $-1.5\;ppm/^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.298-298
• /
• 2007

Influence of $TiO_2$ on the dielectric properties of the $Bi(Nb_{0.7}Ta_{0.3})O_4$ ceramic with 7 wt% zinc borosilicate(ZBS) glass was investigated as a function of the $TiO_2$ contents with a view to applying this system to LTCC technology. The $Bi(Nb_{0.7}Ta_{0.3})O_4$ ceramic addition of 7 wt% ZBS glass ensured successful sintering below $900^{\circ}C$. But, TCF of $Bi(Nb_{0.7}Ta_{0.3})O_4$ ceramic is large negative values, respectively, it is necessary to adjust to zero TCF for practical applications Therefore, the addition of materials having positive TCF, such as $TiO_2$, might be an effective method for the improvement. In general, increasing addition of $TiO_2$ increased dielectric constant and TCF but it decreased the sinterability and $Q{\tiems}f$ value significantly due to the dielectric property and high sintering temperature of $TiO_2$. $Bi(Nb_{0.7}Ta_{0.3})O_4$ ceramic with 7 wt% ZBS glass and then addition 0.5 wt% $TiO_2$ sintered at $900^{\circ}C$ demonstrated 42 in the dielectric constant(${\varepsilon}_r$), 1,000 GHz in the $Q{\times}f$ value, and $10{\pm}5\;ppm/^{\circ}C$ in the temperature coefficient of resonant frequency(${\tau}_f$).

• Journal of the Korean Ceramic Society
• /
• v.15 no.2
• /
• pp.79-84
• /
• 1978

$Zn_{0.105}Co_{0.025}Li_{0.435-1/2x}Ni_x Fe_{2.435-1/2x-y }Mn_y O_4$ 조성의 메모리코어 특성과 $Nb_2O_5$ 및 $V_2O_5$의 소량 첨가가 square-loop성질에 주는 영향을 연구하였다. 위의 조성에서 닉켈의 양 x는 0에서 0.15까지, 그리고 망간의 양 y는 0.05에서 0.25까지 변화시켰다. $Nb_2O_5$와 $V_2O_5$의 양은 각각 위의 화학식에 대하여 0.005에서 0.015까지 변화시켰다. 실험결과에 의하면 $Mn^{+3}$를 octahedral자리에 첨가하였을 때에는 잡음이 감소되었고 메모리코어 squareness와 보자련의 온도계수가 증가하였다. 닉켈을 첨가하였을 때에는 메모리코어의 squareness와 잡음이 증가하였다. $Nb_2O_5$를 소량 첨가하였을 때에는 square-loop성질이 개선되었음에 비하여 $V_2O_5$를 소량 첨가하였을 때에는 square-loop성질이 나빠졌다.

• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1267-1275
• /
• 1996

Green sheet was prepared by tape casting in the composition of (1-x)Pb(Mg1/3Nb2/3)O3-PbTiO3 system using Pb(Mg1/3Nb2/3)O3 and PbTiO3 synthesized with PbO, Nb2O5 MgO and TiO2 The densest green sheet was obtained in the weight ratio 70:30 of powder to binder. Green sheet wasmultilayered in metal mould and formed into lamination at 7$0^{\circ}C$, 300kg/cm2 The lamination was sintered at 110$0^{\circ}C$ 2hr, Dielectric constant and Curie temperature of disc type sintered body was highered with increasing the amount of PbTiO3 and was in the range of 19000-21000, -7~45$^{\circ}C$ respectively. Green and sintered relative density of lamination was 61% and 95% respectively.