• The Korean Journal of Physiology
• /
• v.23 no.2
• /
• pp.291-299
• /
• 1989

Na and Ca effects on contracture were studied in order to estimate Na/Ca exchange ratio in the isolated atrial muscle of the rabbit. All experiments were performed in tris-buffered Tyrode solution which was being aerated with 100% $O_2\;and\;kept\;at\;37^{circ}C$. To load intracellular $Na^+,\;10{-6}M$ ouabain or K-free solution were used. Contractures were induced by brier exposure of atrial muscle to Tyrode solution containing various concentrations of Ca or of Na. The results obtained were as follows: 1 ) Increasing the extracellular Ca concentration, the amplitude of contracture also increased and was maximum at 8 mM Ca-Tyrode solution. 2) The relationship between extracellular Ca concentrations and relative amplitude of the contractures showed hyperbolic pattern. By using Hill plot, the line has the slope of 1 12 which means the number of Ca binding sites of the carrier in the cell membrane. 3) The amplitude of the contracture was maximum in 0 mM Na-Tyrode solution and decreased in dose dependent manner when the Na concentration increased. 4) When the relationship between extracellular Na concentrations and the amplitude of contractures was expressed as dose-response curve, the curve showed sigmoid pattern. The line with the slope of 2.82 was obtained by using Hill plot. 5) From above all the results, it is suggested that exchange ratio of Na and Ca via Na/ca exchange system in the atrial muscle of rabbit could be 3:1 approximately.

• The Korean Journal of Physiology
• /
• v.26 no.1
• /
• pp.55-68
• /
• 1992

The effects of changes in extracellular $Na^+\;and\;Ca^+$ concentration on the membrane potential and contractility were studied in the antral circular muscle of guinea pig stomach in order to elucidate the existence and the nature of $Na^+/Ca^{2+}$ exchange mechanism. All experiments were performed in tris buffered Tyrode solution which was aerated with 100% $O_2$ and kept at $35^{\circ}C.$ The treatment of $10^{-5}$ ouabain was performed to induce intracellular $Na^+$ loading prior to the start of experiment. The results were as follows: 1. $Na^+$-free Tyrode or high $Ca^{2+}$-Tyrode solution hyperpolarized the membrane potential and induced contracture. The time course of contracture was similar to that of change in membrane potential. 2. The degree of hyperpolarization and the amplitude of contracture decreased in accordance with the increase of extracellular $Na^+$ concentration. 3. $Na^+$-free contracture was developed even after blocking the influence of intrinsic nerves by the pretreatment with atropine, guanethidine and TTX. 4. $Ca^{2+}$-channel blockers(D-600 or $Mn^{2+}$) and the blocker of intracellular $Ca^{2+}$ release from sarcoplasmic reticulum(ryanodine) did not suppress the development of $Na^+$-free contracture. And also, dinitrophenol had no effect on $Na^+$-free contracture. 5. Dose-response relationship between extracellular $Na^+$ concentrations and the magnitude of contractures showed a sigmoid pattern. The slope of straight line from Hill plot was 2.7. 6. In parallel with the increase of extracellular $Ca^{2+}$ concentration, the amplitude of contracture increased dose dependently and was maximum at 8 mM $Ca^{2+}$-Tyrode solution. 7. The relationship between extracellular $Ca^{2+}$ concentrations and the magnitude of contractures showed hyperbolic pattern. The slope of straight line from Hill plot was 1.1. From the above results, it is suggested that $Na^+/Ca^{2+}$ exchange mechanism exists in the antral circular muscle of guinea pig stomach and this mechanism affects the membrane potential electrogenically.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.727-732
• /
• 2006

The object of this study was to investigate the influence of composition and concentration of electrolyte, ratio of cation to anion exchange resin of mixed ion exchange column in the performance of ion exchange. Also this work examined the removal capability of suspended solids by ion exchange resin and the effect of particule on the characteristics of ion exchange. Breakthrough time was extended as the amount of ions and particles present in liquid was decreased. The case of anion, the breakthrough sequence is $Cl^{-}, but the case of cation, the breakthrough sequence is $Na^{+}. As for the ratio of cation to anion exchange resin of 1:2, the breakthrough time was prolonged compared with that of 1:1 and 1:3. For the electrolyte of equal concentration containing suspended solid, breakthrough time was contracted less than 20%. It results in the increase in the removal capacity of cation exchange resin. For the higher ratio of cation exchange resin, suspended solids are shorten the cation's breakthrough time so that the runtime of ion exchange resin tower is increased.

• Korean Chemical Engineering Research
• /
• v.45 no.2
• /
• pp.160-165
• /
• 2007

The synthesis and the characterization of Low Silica X (LSX) zeolite for nitrogen adsorption have been studied. The performance of LSX zeolite for nitrogen adsorption was compared to that of the commercial zeolite. The $Na_2O/(Na_2O+K_2O)$ ratio in the gel and the crystallization time were fixed as the synthetic factor. The LSX zeolite was formed at the $Na_2O/(Na_2O+K_2O)$ ratio of 0.75. The formation of LSX zeolite was confirmed by XRD and SEM. The Si/Al ratio was investigated by using XRF and FT-IR. The synthesized LSX zeolite showed a lower Si/Al ratio than the NaY and NaX zeolites although they have a same faujasite structure. The Si/Al ratio of the LSX zeolite converged close to 1. 1A (Li, Na, K) and 2A (Mg, Ca, Ba) group elements were ion-exchanged to the LSX zeolite. As the charge density of cation rises, the amount of nitrogen adsorbed increased. $Li^+$ ion-exchanged LSX zeolite showed the highest nitrogen adsorption weight. When the Li/Al ratio was over 0.65, nitrogen adsorption increased remarkably. $Li^+$ ions located on the supercage (site III, III') in the LSX zeolite played a role as nitrogen adsorption sites. When the $Ca^{2+}$ ions were added to the LiLSX zeolite by ion-exchange method, the performance for nitrogen adsorption increased more. The performance for the nitrogen adsorption was the highest at the Ca/Al ratio of 0.26. Nitrogen adsorption capacity of LiCaLSX (Ca/Al=0.26) zeolite was superior to the commercial NaX zeolite.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.123-130
• /
• 2005

Zeolite X adsorbents with large surface area were prepared for using oxygen PSA adsorbent. Selective adsorption performance of nitrogen on the synthesized zeolite X adsorbent was improved by the cation exchange of adsorbent. The zeolite X which had over $650m^2/g$ surface area was synthesized at the conditions of $SiO_2\;:\;Na_2O\;:\;H_2O\;:\;Al_2O_3$ = 2.5 : 3.5 : 150 : 1 mole ratio, $98^{\circ}C$ temperature and 18 h synthesized time in 50 L reactor. The metal ions Li, Ag, Ca, Br, Sr, etc. were investigated for ion exchange with zeolite X. Ag ion was showed the highest ion exchange rate among these metal ions and all metal ions were exchanged with Na ion at equivalent rate. Compared with the NaX adsorbent, the ion exchanged zeolite X adsorbent remarkably improved its adsorption performance of nitrogen at the conditions of $10{\sim}40^{\circ}C$ temperature and 0~9 atm pressure. At an equilibrium pressure under 0.5 atm, adsorption performance of nitrogen on the ion exchanged zeolite adsorbent increased in the order of Ag > Li > Ca > Sr> Ba > K, whereas at an equilibrium pressure over 1 atm showed in the order of Li > Ag > Ca > Sr > Ba > K. Nitrogen/oxygen separation factor of Li ion exchanged zeolite X adsorbent was 13.023 at the partial pressure of nitrogen/oxygen gas mixture similar to air and $20^{\circ}C$ adsorption temperature.

• Journal of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.249-256
• /
• 1972

Hadong-Kaolin was treated with aqueous sodium hydroxide solution. The crystalline structure was studied by X-ray powder diffraction method. The optimum conditions for various crystal formation were as follows: Crystal Concentration Temp. reating time Halloysite 1~4 N NaOH $60^{\circ}C$ 0.5${\sim}$4 hr Sodium A zeolite 0.5${\sim}$2 N NaOH 80${\sim}$$100^{\circ}C$ 6${\sim}$20 hr Hydoxysodalite > 4 N NaOH 80${\sim}$$100^{\circ}C$ > 4 hr The ratio of $Na_2O to SiO_2$ for crystallizing sodium A zeolite was 0.5-1.5. The $Ca^{++}$ ion exchange capacity of produced sodium A zeolite for 0.2 N $CaCl_2$ solution at $25^{\circ}C$ was amounted to 65% of theoretical value.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.240-247
• /
• 2017

In this study, the heterogeneous ion exchange membranes prepared by the combination of the carbon electrode and mixed the cation and anion exchange polymers and polyvinylidene fluoride as the basic polymer together were made to recognize the efficiency of the salt removal for the application of the membrane capacitive deionization process. The mixing weight ratio of the solvent, basic polymer and ion exchange resin was 7 : 2 : 1 and this mixed solution was directly cast on the electrode. As for the operating conditions of the adsorption voltage and time, feed flow rate, desorption voltage and time of the feed solution NaCl 100 mg/L, the salt removal efficiencies (SRE) were measured. Apart from this NaCl, the $CaCl_2$ and $MgSO_4$ solutions were investigated in terms of SRE as well. Typically, SRE for NaCl 100 mg/L solution under the conditions of adsorption voltage/time, 1.5 V/3 min, desorption voltage/time -0.1 V/3 min, was shown 98%. And for the $CaCl_2$ and $MgSO_4$ solutions, the SREs of 70 and 59% were measured under the conditions of adsorption voltage/time, 1.2 V/3 min, desorption voltage/time -0.5 V/5 min, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.1
• /
• pp.11-17
• /
• 2005

Na-A zeolite were synthesized from melting slag of the incinerated ash by the alkaline activation processes. The experiments were performed in stainless steel vessels, with continuous stirring during the reaction periods. The silica-rich solution, a starting material, which was the waste of crystal growth factory, contains 5.7 wt% SiO₂ and 3.2 wt% Na₂O. And NaAlO₂ was made by the reaction of aluminium dross and NaOH solution and its molar ratios were Na₂O/Al₂O₃= 1.2 and H₂O/Na₂O=9. During the residence time of 7∼8 h at 80℃, the mixing of the silica-rich solution, NaAlO₂ and melting slag yields the production of homogeneous Na-A zeolite. The optimal reactant composition in molar ratio of Na₂O:Al₂O₃:SiO₂ was 1.3∼l.4 : 0.8∼0.9 : 2 and mixing ratio of solution and slag was 1/7∼10 (g/cc). Synthesized Na-A zeolite has cubic form uniformly and its size ranges about 1 ㎛. Ca/sup 2+/ ion exchange capacity of the Na-A was about 180∼210 meq/100g, corresponding approximately 80% to the commercial detergent builder.

• Journal of Environmental Science International
• /
• v.9 no.3
• /
• pp.253-259
• /
• 2000

The purpose of this study is to investigate the physicochemical characteristics of salinization of groundwater at the estern area of Cheju island. For this purpose, the major ions of groundwater, spring water are analyzed. The concentration of $Cl^-$ and Na^++K^+$/ contained in the groundwater at near the coastline are higher than those at inland area away from the coastline. The water quality components of groundwater observed at this area can be classified into 4 types such as Na-Cl, $HCO_3, Na-Cl-HCO_3$ and Ca-HCO$_3$. The concentration ratio of $SO_4^1 to Cl^- is 0.1354(R^2=0.972)$ at this area. This value is very similar with Dittomer's ratio of 0.13. For Na^+, K^+, and Mg^{2+}/ versus Cl^-$, their ratios also show a significant relationship between sea water and groundwater in this area. From the chloride-bicarbonate ratio, it can be estimated that the intrusion distance of seawater from coastline to inland area is 2.8km at Onpyung-Nansan, Sangdo and Pyungdae areas, and 5.4km at Kosung-Susan area. The mixing ratio between seawater and fresh water by the intrusion of seawater is decreased with the distance toward inland from coastline. This ratio(fresh water : seawater) is 80:20 in spring water adjacent the coastlines, Onpyung area and 99.8:0.2 in the well at No.3 of Susan located at inland away from the coastline. The concentration of $Na^+$ observed at field is 25~45% lower than that theoretically calculated by this mixing ratio. Based on the data of EC, the equipotential line of 500$\mu$mhos/cm is located at 4~5km poing at Kosung-Susan area and 2.5km point at the other area. The equation of correlation between $Cl^-$ concentration and EC values is $Cl^-$=0.1927EC-16.683 for the area lower than 500 $\mu$mhos/cm and $Cl^-$=0.2773EC for the area beyond 500 $\mu$mhos/cm.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.29-37
• /
• 2018

In this study, optimum extraction conditions for phosphorus recovery from sewage sludge ash(SSA) were investigated. For this purpose, an experiment was conducted to determine optimal recovery conditions for Ca-P type phosphorus by using calcium component in the recycled aggregate residue. The phosphorus content of sewage sludge ash was confirmed to be 5.0 %. When $H_2SO_4$ was used as an extract, concentration of 1 N $H_2SO_4$, L/S ratio of 10, and extraction time of 30 min were found to be the optimal extraction conditions. Phosphorus was extracted by using optimal extraction conditions, and then the heavy metals eluted with phosphorus were removed using 1~20 g of cation exchange resin. In 20 g of cation exchange resin, Fe 71.3%, Cu 82.4%, Zn 79.9%, and Cr 15% were removed. After that, the mixing ratio of the calcium extract obtained from the recycled aggregate residue (RAR) was changed to 1:1, 1:5, 1:10. The pH of the SSA to RAR mixture was adjusted to 2, 4, 8 and 12 by the addition of 5 N NaOH to the mixture of 1:5, and the phosphorus was recovered as Ca-P type precipitate. The optimum pH was 8. When recycled aggregate residues were used, the weight of calcium phosphate increased, but the amount of wastewater generated also increased. Therefore, it was concluded that the use of recycled aggregate residue was not economically feasible.