• 제목/요약/키워드: $N_2$ treatment

검색결과 7,636건 처리시간 0.039초

돈분의 수분조절 및 부숙기간이 퇴비화에 미치는 영향 (Effects of Maturing Period and Moisture Content of Swine Manure on Composting Potentials)

  • 김원호;정광화;서성;백광수;신동은;유성오;김원영
    • 한국축산시설환경학회지
    • /
    • 제4권1호
    • /
    • pp.47-53
    • /
    • 1998
  • The purpose of this study was to investigate the change of temperature, moisture content, weight and chemical properties in swine manure during the maturing process and moisture content of swine manure. The manure production on the early time(1 days), middle(25 days: and late(50 days) were made by moisture 45%, 55%, 65%, 75% in swine manure, according to manure treatment of the early time, the highest temperature of swine manure treatment was 59$^{\circ}C$ as moisture 75% after mixed 24 hours, the lowest 45% in mixed 25 days(middle time), 32$^{\circ}C$ as moisture 45% in mixed 50 days(late time). 2. Weight change during maturing manure, the most treatment of weight decrease was 17.4% as moisture 45%, the least of those was 12.2% as moisture 75% during maturing process of swine manure. 3. Volume change during maturing manure, the most treatment of volume decrease was 37.1% as moisture 65%, the least of those was 32.1% as moisture 55% during maturing swine manure, but not big difference between treatment. 4. T-N, P2O5, K2O content of compost were increased during maturing process, On the contrary, T-C content and C/N ratio were reduced.

Ar/N2 2단계 플라즈마 처리에 따른 저온 Cu-Cu 직접 접합부의 정량적 계면접착에너지 평가 및 분석 (Effects of Ar/N2 Two-step Plasma Treatment on the Quantitative Interfacial Adhesion Energy of Low-Temperature Cu-Cu Bonding Interface)

  • 최성훈;김가희;서한결;김사라은경;박영배
    • 마이크로전자및패키징학회지
    • /
    • 제28권2호
    • /
    • pp.29-37
    • /
    • 2021
  • 3 차원 패키징을 위한 저온 Cu-Cu직접 접합부의 계면접착에너지를 향상시키기 위해 Cu박막 표면에 대한 Ar/N2 2단계 플라즈마 처리 전, 후 Cu표면 및 접합계면에 대한 화학결합을 X-선 광전자 분광법(X-ray photoelectron spectroscopy)을 통해 정량화한 결과, 2단계 플라즈마 처리로 인해 Cu표면에 Cu4N이 형성되어 Cu산화를 효과적으로 억제하는 것을 확인하였다. 2단계 플라즈마 처리하지 않은 Cu-Cu시편은 표면 산화막의 영향으로 접합이 제대로 되지 않았으나 2단계 플라즈마 처리한 시편은 효과적인 표면 산화방지효과로 인해 양호한 Cu-Cu접합을 형성하였다. Cu-Cu직접접합 계면의 정량적 계면접착에너지를 double cantilever beam 시험방법 및 4점 굽힘(4-point bending, 4-PB) 시험방법을 통해 비교한 결과, 각각 1.63±0.24, 2.33±0.67 J/m2으로 4-PB 시험의 계면접착에너지가 더 크게 측정되었다. 이는 계면파괴역학의 위상각(phase angle)에 따른 계면접착에너지 증가 거동으로 설명할 수 있는데 즉, 4-PB의 계면균열선단 전단응력성분 증가로 인한 계면거칠기의 효과에 기인한 것으로 판단된다.

홍천강 유역의 하수고도처리를 적용한 마을하수처리 효율 및 기여율 평가 (Estimation of Contribution Ratio and Community Sewerage Treatment Efficiency by using Advanced Sewage Treatment in the Basin of Hongcheon-river)

  • 박수진
    • 한국산학기술학회논문지
    • /
    • 제14권7호
    • /
    • pp.3570-3576
    • /
    • 2013
  • 본 논문은 홍천군의 마을하수도를 대상으로 하여 하수고도처리효율 및 삭감오염부하량을 산정하여 마을하수도의 기여율을 평가하였다. A2/O와 SBR 공법의 경우 BOD, COD에서 95%와 94%의 높은 처리효율을 보였으며, SS는 80%의 처리효율을 보였다. 반면 T-N과 T-P는 56%와 66%로 다른 항목에 비하여 비교적 낮은 처리효율을 보였으나 SS의 경우 MBR 공법에서 96%로 높은 처리효율을 보이는 것으로 관찰되었다. 다음으로 마을하수도 방류하천인 홍천강의 수질 경년적 변화를 관찰한 결과, COD와 T-N, T-P에서 수질이 크게 악화되고 있는 것으로 관찰되었으나, 마을하수도 설치 운영으로 일반 수질항목에서 80%이상, T-N과 T-P는 58%와 68%의 높은 오염부하 삭감량을 보이고 있어 홍천강 수질 개선에 크게 기여할 것으로 보인다.

낙동강수계 주요 하·폐수처리장 방류수내 미량유해물질 모니터링 (Monitoring of Hazardous Chemicals for Effluents of STPs and WWTP in the Nakdong River Basin)

  • 김경아;서창동;이상원;류동춘;권기원
    • 한국환경과학회지
    • /
    • 제23권7호
    • /
    • pp.1253-1268
    • /
    • 2014
  • This study was investigated twenty two hazardous chemicals compounds for effluents of nine sewage treatment plants (STPs) and one waste water treatment plant (WWTP) in the Nakdong Ri-ver Basin. They are eleven phthalates(DMP, DEP, DIBP, DBP, BEEP, DNPP, DHP, DCP, DEHP, DNOP, Dinonyl phthalate, seven aliphatic hydrocarbons(n-Tridecane, n-Tetradecane, n-Pentadecan-e, n-Hexadecane, n-Heptadecane, n-Octadecane, n-Nonadecane, Isoquinoline, 2-Chloropyridine, 2-N-itrophenol, and Benzophenone. The twenty two compounds were analyzed by gas chromatograp-hy mass spectrometry (GC/MS) with liquid-liquid extraction (LLE). Twenteen of twenty two subs-tances were detected. They were DMP, DEP, DIBP, DBP, DEHP, n-Tetradecane, n-Pentadecane, n-Heptadecane, n-Octadecane, n-Nonadecane, Isoquinoline and Benzophenone. Among these, DEHP, DEP and Benzophenone were most frequently observed. They were obtained as $ND{\sim}36.881{\mu}g/L$, $ND{\sim}0.950{\mu}g/L$, $ND{\sim}2.019{\mu}g/L$, respectively. When the substances were calculated the average concentration at 10 points, the maximum average detection concentration was investigated at the Dalseocheon STP.

분뇨처리장 방류수정화 갈대습지셀의 초기운영단계 질산성질소 제거 (NO3-N Removal of A Reed Wetland Cell Constructed for Purifying Effluent from A Night Soil Treatment Plant During Its Initial Operating Stage)

  • 양홍모
    • 한국환경복원기술학회지
    • /
    • 제7권5호
    • /
    • pp.100-106
    • /
    • 2004
  • $NO^3$-N removal was examined from July 2002 to December 2002 of a surface-flow constructed treatment wetland cell, which was a part of a treatment wetland system composed of four wetland cells and one distribution pond. The system was established on rice paddy near the Kohung Estuarine Lake located at the southern part of the Korean Peninsula. The lake and the paddy were formed by a salt marsh reclamation project. Effluent from a secondary-level treatment plant was funneled into the system. The investigated cell was created in June 2002. Its dimensions were 87 m in length and 14 m in width. It had an open water zone at its center, which was equivalent to 10 percent of its total area. Reeds(Phragmites australis) were transplanted from natural wetlands into the cell and their stems were cut at about 40 cm height from their bottom ends. Average 25 $m^3$/day of effluent from the plant was funneled into the cell by gravity flow and average 24.2$m^3$/day of its treated effluent was discharged into the Sinyang Stream flowing into the lake. Its water depth was maintained about 0.2 m and its hydraulic detention time averaged 5.2 days. The average height of the reed stems was 45.2 cm in July 2002 and 80.5 cm in September 2002. The number of stems averaged 40.3 stems/$m^2$ in July 2002 and 74.5 stems/$m^2$ in September 2002. The reeds were established initially well. $NO_3$-N loading rate of influent and effluent averaged 173.7 and $93.5mg/m2{\cdot}day$, respectively. Removal of $NO_3$-N averaged $80.2mg/m2{\cdot}day$ and its removal rate by mass was about 50 %. Considering the initial operation of the cell and the inclusion of the cold months of November and December in the analysis period, the $NO_3$-N removal rate was good.

The Processing of Livestock Waste Through the Use of Activated Sludge - Treatment with Intermittent Aeration Process -

  • Osada, T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권5호
    • /
    • pp.698-701
    • /
    • 2000
  • To prevent surface and underground water pollution, wastewater treatment is essential. Four bench-scale activated sludge units (10 L operational volumes) were operated at 5, 10 and $20^{\circ}C$ for evaluation of treatment efficiencies with typical wastewater from swine housing. The units were set for a 24-hour cycle. As compared to the conventional process, high removal efficiencies for organic substances, nitrogen and phosphorus in swine wastewater were obtained simultaneously with an intermittent aeration process (lAP). The NOx-N produced during an aeration period was immediately reduced to nitrogen gas (e.g. $N_2$ or $N_2O$) in the subsequent non-aeration periods, and nitrification in aeration periods occurred smoothly. Under these conditions, phosphorus removal occurred with the release of phosphorus during the non-aeration periods followed by the excess uptake of phosphorus in the activated sludge during aeration periods. It was confirmed that the lAP had a better ability to remove pollutants under both low temperatures and high nitrogen loading conditions than the ordinary method did. In addition to that, the total emission of $N_2O$ from lAP was reduced to approximately 1/50 of the conventional process for the same loading. By adopting an adequate aeration programme for individual swine wastewater treatment, this system will provide a promising means for nitrogen and phosphorus control without pH control or addition of methanol.

효과적 공간활용을 위한 Side Stream Plug-Flow Reactor를 이용한 하수 고도처리 공정 적용에 관한 연구 (A study on Applicable to Advanced treatment of using Side Stream Plug-Flow Reactor)

  • 김삼주;현인환;독고석
    • 상하수도학회지
    • /
    • 제22권3호
    • /
    • pp.367-372
    • /
    • 2008
  • This study configured the conventional $A^2O$ (Anaerobic-Anoxic-Aerobic bioreactor) system which the fixed media immersed into the anoxic reactor(Named PFR system : Plug Flow Reactor) for evaluating the removal efficiency of nitrogen in the wastewater. The experimental equipment was a cylinder which was consist of 4 pleated PE Pipes(Length 330M, Diameter 100mm) including 2 rope shape media. As a result, the average effluent T-N removal efficiency of the conventional $A^2O$ system was 17.9, 40.3, 50.6, 44.6% in each mode, but the average effluent T-N removal efficiency of the PFR system could achieve 38.8, 57.1, 71.8, 65.4% in each mode. It indicated that the PFR system caused to the increasing of C/N ratio that effected to the increasing of the denitrification efficiency. Not only the effective T-N removal efficiency but also the controllable install space will give advantages for retrofitting of the wastewater treatment plant with the conventional treatment system to the PFR system.

중풍환자의 혈압 상승에 대한 대추혈 사혈의 혈압 강하 효과 (Decreasing Effect of Wet-Cupping at Daechu (대추, Dazhui:GVl4)-point on the Increase of Blood Pressure in Patients with Stroke)

  • 신정애;이영구
    • 대한한의학회지
    • /
    • 제23권3호
    • /
    • pp.85-95
    • /
    • 2002
  • Objectives : Daechu (Dazhui:GV14 (Governor Vessel 14))-point is located between the spinous process of the 7th cervical vertebra and that of the 1st thoracic vertebra. GV14 has been used to treat hypertension, high fever, neck pain, common cold, headache and so on. Hypertension often negatively affects the improvement of stroke patients. We investigated whether wet-cupping at GV14 had any effect of decreasing blood pressure (BP). Methods : In this study, 81 stroke patients were studied, from Oct. 2000 to Sept. 2001. They were composed of a Sample group (n=36) and Control group (n=45). The Sample group (n=36) was divided into Sample-Normal (n=9), Sample-Mild (n=7), Sample-Moderate (n=l1), and Sample-Severe group (n=9). The Control group (n=45) was divided into Control-Moderate (n=34) and Control-Severe group (n=ll). We checked blood pressure 5 times (just before treatment, then after 30,60, 90, and 120min. (2hrs.)) in each sample group and 3 times (baseline, after 30, and after 120min. (2hrs)) in the control group. Results : In a comparison of before-treatment BP and after-treatment BP in the sample group, SBP significantly decreased as time passed, while DBP slightly decreased but not significantly. In comparison of BP differences in each sample subgroup, BP slightly increased in the Sample-Normal group, but significantly decreased in the Sample-Mild, Sample-Moderate, and Sample-Severe groups. In comparison of BP differences between the sample and control groups, SBP and DBP of the sample group definitely decreased more than those of the control group, but not significantly. Conclusions : This study suggests that wet-cupping at GV14 has significant decreasing effectson blood pressure in stroke patients. Accordingly, we hope that this measure will be used more widely as an emergent treatment for increased blood pressure.

  • PDF

PVT 법으로 성장된 AlN 단결정의 열처리 공정에 대한 연구 (A study on the heat treatment process for AlN single crystals grown by PVT method)

  • 강승민
    • 한국결정성장학회지
    • /
    • 제27권2호
    • /
    • pp.65-69
    • /
    • 2017
  • AlN 단결정을 $1600{\sim}1800^{\circ}C$의 온도에서 100 torr 이하의 진공하에서 $100^{\circ}C$ 간격으로 열처리하였다. AlN 단결정은 고주파유도가열 방식으로 가열되는 성장부를 갖는 성장장치를 사용하여 PVT법으로 얻어내었다. 단결정 시편들의 표면을 광학현미경으로 관찰하였으며, 성장된 압력 하에서 온도에 따라 형상이 달라짐을 알 수 있었다. 본 연구에서는 광학현미경 관찰 결과를 보고하고자 하며, 열처리 온도가 증가함에 따라 표면의 열에칭이 나타났는데, 이는 작은 에치핏의 형성을 통하여 관찰하였다.

NH3분위기에서 Ti 질화에 의한 TiN 형성 (Formation of TiN by Ti Nitridation in NH3Ambient)

  • 이근우;박수진;유정주;권영호;김주연;전형탁;배규식
    • 한국전기전자재료학회논문지
    • /
    • 제17권2호
    • /
    • pp.150-155
    • /
    • 2004
  • This study attempts to form a TiN barrier layer against Cu diffusion by the easier and more convenient method. In this new approach, Ti was sputter-deposited, and nitrided by heat-treating in the NH$_3$ambient. Sheet resistance of as-deposited Ti was 20 Ω/$\square$, but increased to 195 Ω/$\square$ after the heat-treatment at 30$0^{\circ}C$, and lowered to 120 Ω/$\square$ after the heat-treatment at 50$0^{\circ}C$, and $600^{\circ}C$. AES results for these thin films confirmed that the atomic ratio of Ti and N was close to 1:1 at or above 40$0^{\circ}C$ heat-treatment. However, it was also found that excessive oxygen was contained in the TiN layer. To examine the barrier property against Cu diffusion, 100nm Cu was deposited on the TiN layer and then annealed at 40$0^{\circ}C$ for 40 min.. Cu remained at the surface without diffusing into the Si layer.