• Journal of Plant Biology
• /
• 제36권3호
• /
• pp.233-239
• /
• 1993

Effect of Ca2+ on the conversion of 1-aminocycloprophane-1-carboxylic acid (ACC) to ethylene was studied with 2.5 day-old mung bean hypocotyl segments. The conversion of ACC in these tissues was inhibited by plasmolysis and sulfosuccinimidyl (hydroxyphenyl) propionate (sulfo-SHPP). The ACC induced ethylene production in HC (high calcium)-tissue grown on the Ca2+ added medium was greater than that in N (normal)-tissue. HC-tissue had a lower inhibition rate of ACC conversion by EGTA and Ca2+ -channel blockers than N-tissue. The rates of the ACC conversion by both kinds of tissues were stimulated by the Ca2+ ionophore A23187. From these results, we suggests a mechanism for the stimulative effect of Ca2+ on the conversion of ACC to ethylene as follows; in some tissues where ACC conversion is linked with plasma membrane, Ca2+ may be transported from apoplast through Ca2+ -channel into the cytoplasm ad stimulate ACC-oxidase activity.

• 청정기술
• /
• 제29권2호
• /
• pp.126-134
• /
• 2023

직접촉매분해기술은 반도체 및 디스플레이 산업에서 아산화질소(N₂O)의 배출을 완화할 수 있는 유망한 기술이다. 본 연구는 7대 온실가스 중에 하나인 N₂O 직접촉매분해를 위한 γ-Al₂O₃ 촉매에 관한 것이다. 실험에 사용한 γ-Al₂O₃ 촉매는 뵘석 분말을 사용하여 압출 성형하여 제조하였으며, 반응은 직경 약 5 mm 크기로 분쇄한 촉매를 직경 25.4 mm (1인치) 반응기를 사용하여 수행하였다. N₂O 농도는 약 1%가 되도록 공급하였으며, 온도는 550-750 ℃, 압력은 상압, GHSV는 1800-2000 h-1에서 촉매반응 특성을 확인하였다. 분위기 가스로는 질소, 공기 그리고 공기+수분을 공급하여 N₂O 분해 특성과 산소의 영향 및 스팀의 영향을 확인하였다. 촉매 내구성은 N₂ 분위기에서 수행하였는데, 700 ℃에서 350 시간 동안 연속 운전을 통해 확인하였다. 실험결과 불활성 분위기(N₂)일 경우 700 ℃에서 N₂O 분해율이 100%에 가까운 수준까지 도달함을 확인하였고, 공기와 수분을 공급할 경우 분해율이 낮아짐을 확인하였다. 내구성 실험 결과 350 시간동안 촉매성능저하는 없었다. 따라서 뵘석 분말로 제조한 γ-Al₂O₃ 촉매는 N₂O 분해 특성에 우수할 뿐만 아니라 내구성 또한 우수하여 전자 산업을 비롯하여 질산제조공정 등 산소와 수분이 존재하는 경우에도 적용 가능할 것으로 기대한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권2호
• /
• pp.192-195
• /
• 1998

Biomass conversion efficiencies (B.C.E) of six fish species viz, Catla catla, Labeo, rohita, Cirrhina mrigala, Hypophthalmicthys molitrix, Ctenopharyngodon idella and Cyprinus carpio cultured under artificial feed (T1), broiler manure (T2), buffalo manure (T3), N:P:K (25:25:0) (T4) and control pond (T5) have been determined for the period of one year. The overall biomass conversion efficiencies under the influence of T2, T3, and T4 were statistically similar. However, the best (0.40) efficiency was determined under feed supplement-ation (T1).

• 한국작물학회지
• /
• 제50권6호
• /
• pp.387-393
• /
• 2005

2002년부터 2004년까지 수원의 작물과학원 논포장을 년차간 순차적으로 밭으로 전환하고 또 밭상태에서 우분을 누적투 입하면서 호밀과 옥수수의 윤작을 통하여 질소와 관련된 토양 특성, 작물의 건물수량 및 질소흡수량을 조사하였는데, 주요 결과는 다음과 같다. 논의 밭전환 1년차에는 밭사료작물, 특히 답리작 호밀의 생육과 수량이 현저히 감소하였으며, 그에 따라 우분시용에 의한 무기태질소 등 양분의 이용효율도 현저히 감소하였다. 그러나 전환년차의 증가와 함께 밭사료작물의 수량과 질소흡수량이 증가하였는데, 특히 밭상태에서 전환3년차까지 우분의 누적투입은 토양에의 무기태 질소공급과 더불어 옥수수의 수량, 질소흡수량 및 우분질소 이용률을 계속적으로 증가시켰다. 그 증가는 전환년차 증가에 따른 논토양 자체의 질소공급보다는 주로 우분시용에 의한 토양물리성 개선, 토양탄소 및 무기화 가능한 지력질소(가급태질소) 증가 등 지력증진에 크게 기인하였다. 따라서 전환밭에서 정상적인 밭사료작물의 수량을 얻기 위해서는 전환2년 이상의 기간이 필요하였으며, 이때 우분의 투입은 토양에 무기태질소 공급뿐만아니라 토양유기물 등 지력증진에도 효과적이었으며, 또한 그것이 누적적으로 투입될 때 그 효과가 증가되는 것으로 나타났다.

• 한국안광학회지
• /
• 제10권1호
• /
• pp.9-15
• /
• 2005

CR 렌즈에 가한 미세응력 크기의 시각화를 위한 편광기는 광원-편광판-시료-편광판-CCD-컴퓨터-chrome 변환 로 구성하였고, 각 편광판의 단계별 광 파의 $E_1$, $E_2$의 성분을 분석하여, 주 응력차 ${\sigma}_1-{\sigma}_2$와 무늬 차수(n)를 유도하였다. 시료의 광 축이 주 응력 방향과 일치하는 것으로부터 2 차원 모델을 결정할 수 있다. 광파에 작용하는 이중 굴절성과 위상 지연은 주 응력차(${\sigma}_1-{\sigma}_2$)에 비례하며, 최종 광 파의 세기는 $sin^2({\Delta}/2)$에 비례하고, ${\Delta}/2=n{\pi}$ (n=0, 1, 2, ${\ldots}$)일 때 흡광이 일어난다. 미세 응력에 의한 광탄성은 chrome 변환을 이용하여 분석 가능하였으며, 이미지는 뚜렷하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.662-665
• /
• 2002

This paper describes a novel converter to implement high-speed binary-to-residue conversion for moduli 2$^{n}$ - 1, 2$^{n}$ , 2$^{n}$ +2$^{\alpha}$/($\alpha$$\in$｛0,1,…,n-1｝) without using look-up table. In our implementation, the high-speed converter can be achieved, because of the modulo addition time is independent of the word length of operands by using the Signed-Digit (SD) adders inside the modulo adders. For a LSI implementation of residue SD number system with ordinary binary system, the proposed binary-to-residue converter is the efficient circuit.cient circuit.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.179-184
• /
• 2001

The characteristics of $NO-NO_2$ conversion and soot oxidation by corona discharge are investigated experimentally. The discharge current decreases with the increase of oxygen concentration and it increases more sharply for anode corona than for cathode corona as discharge voltage increases after corona onset voltage. $NO-NO_2$ conversion increases with the energy density of corona discharge and the addition of $O_2$ in a base $N_2$ gas. Soot oxidation occurs at approximately $480^{\circ}C$ in a mixture of 21% $O_2$, base $N_2$ gas, and enhances as temperature increases. The initiation temperature of soot oxidation advances greatly to about $280^{\circ}C$ with the addition of 300ppm $NO_2$, which is generated from the conversion of NO to $NO_2$ by corona discharge. CO is generated at higher temperature by about $50{\sim}100^{\circ}C$ than $CO_2$ in the process of soot oxidation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 2007

Partail oxidation(POX) of n-butane was investigated in this research by employing ceria-promoted Ni/calcium hydroxyapatite catalysts ($Ce_xNi_{2.5}Ca_{10}(OH)_2(PO_4)_6$ ; x = $0.1{\sim}0.3$) which had recently been reported to exhibit good catalytic performance in POX of methane and propane. The experiments were carried out with changing ceria content, $O_2/n-C_4H_{10}$ ratio and temperature. As the $O_2/n-C_4H_{10}$ feed ratio increased up to 2.75, n-$C_4H_{10}$ conversion and $H_2$ yield increased and the selectivity of methane and other hydrocarbons decreased. But with $O_2/n-C_4H_{10}$ = 3.0, $n-C_4H_{10}$ conversion and $H_2$ yield decreased. This is considered due to that too much oxygen may inhibit the reduction of Ni or induce the oxidation of Ni, which results in poor catalytic activity. The optimum $O_2/n-C_4H_{10}$ ratio lay between 2.50 and 2.75. $Ce_{0.1}Ni_{2.5}Ca_{10}(OH)_2(PO_4)_6$ showed the highest $n-C_4H_{10}$ conversion and $H-2$ yield on the whole. In durability tests, higher hydrogen yield and better catalyst stability were obtained with the $O_2/n-C_4H_{10}$ ratio of 2.75 than with the ratio of 2.5.

• The Journal of Advanced Prosthodontics
• /
• 제12권2호
• /
• pp.61-66
• /
• 2020

PURPOSE. The aim of the present study was to determine the degree of conversion of light- and dual-cured resin cements used in the cementation of all-ceramic restorations under different thicknesses of translucent (T) and high-translucent (HT) polymer-infiltrated ceramic-network (PICN) material. MATERIALS AND METHODS. T and HT PICN blocks were prepared at 0.5, 1.0, 1.5, and 2.0 mm thicknesses (n=80). Resin cement samples were prepared with a diameter of 6 mm and a thickness of 100 ㎛. Light-cured resin cement was polymerized for 30 seconds, and dual-cure resin cement was polymerized for 20 seconds (n=180). Fourier transform infrared spectroscopy (FTIR) was used for degree of conversion measurements. The obtained data were analyzed with ANOVA and Tukey HSD, and independent t-test. RESULTS. As a result of FTIR analysis, the degree of conversion of the light-cured resin cement prepared under 1.5- and 2.0-mm-thick T and HT ceramics was found to be lower than that of the control group. Regarding the degree of conversion of the dual-cured resin cement group, there was no significant difference from the control group. CONCLUSION. Within the limitation of present study, it can be concluded that using of dual cure resin cement can be suggested for cementation of PICN material, especially for thicknesses of 1.5 mm and above.

• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1058-1061
• /
• 2003

Gallium Nitride (GaN) powders were synthesized by calcining a gallium(III) sulfate salt in flowing ammonia in the temperature range 500-1100$^{\circ}C$. The process of conversion of the salt to GaN was monitored by X-Ray Diffraction (XRD). The salt decomposed to ${\gamma}$-Ga$_2$O$_3$ and then converted to GaN without ${\gamma}$-${\beta}$Ga$_2$O$_3$ phase transition. Variations in XRD patterns and weight loss of samples with temperature indicate that the conversion of ${\gamma}$-Ga$_2$O$_3$ to GaN does not proceed through Ga$_2$O but stepwise via amorphous gallium oxynitride (GaO$\_$x/N$\_$y/) as intermediates. Room-temperature photoluminescence spectra of GaN powders obtained showed the emission peak at 363 nm and no yellow band.