• Journal of Environmental Science International
• /
• v.16 no.8
• /
• pp.921-928
• /
• 2007

The objective of this work is the air quality modeling according to the scenarios of emission on complex terrain. The prognostic meteorological fields and air quality field over complex areas of Seoul, Korea are generated by the PSU/NCAR mesoscale model (MM5) and the Third Generation Community Multi-scale Air Quality Modeling System (Models - 3/CMAQ), respectively. The emission source was driven from the Clean Air Policy Support System of the Korea National institute of Environmental Research (CAPSS), which is a 1 km x 1 km grid in South Korea during 2003. In comparison of air quality fields, the simulated averaged $PM_{10},\;NO_2,\;and\;O_3$ concentration on complex terrain in control case were decreased as compared with base case. Particularly $PM_{10}$ revealed most substantial localized differences by $(18{\sim}24{\mu}g/m^3)$. The reduction rate of $PM_{10},\;NO_2,\;and\;O_3$ is respectively 18.88, 13.34 and 4.17%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.23-30
• /
• 2014

To improve efficiency of diesel engine which requests high output recently and is used all kinds of industrial areas, this thesis experimented dynamic characteristics and exhaust gas characteristics of diesel engine installed by supercharger of correspondent output 200HP and natural inhalation diesel engine through the dynamometer and exhaust gas analyzer in same condition. As the result of experiment with natural inhalation diesel engine and diesel engine installed by supercharger, there were a few differences of output, but dynamic characteristics at high speed showed increased output and efficiency of the engine installed by supercharger. On the contrary, in exhaust gas characteristics, the model installed by supercharger showed increased exhaust gas such as $NO_X$, $O_2$, etc, but added value of exhaust gas is low if considering $CO_2$ reduction and efficiency of dynamic characteristic's increase. Based on the results, diesel engine installed by supercharger is expected to show higher economic feasibility than natural inhalation diesel than natural inhalation engine from an angle of efficiency. Keywords: 200hp class Turbocharger, Exhaust Gas, Engine Performance, Marine Diesel Engine.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.4
• /
• pp.377-392
• /
• 2017

A set of BFM (Brute Force Method) simulations with the CMAQ (Community Multiscale Air Quality) model were conducted in order to estimate self-contributions and conversion rates of PPM (Primary $PM_{2.5}$), $NO_x$, $SO_2$, $NH_3$, and VOC emissions to $PM_{2.5}$ concentrations over the SMA (Seoul Metropolitan Area). CAPSS (Clean Air Policy Support System) 2013 EI (emissions inventory) from the NIER (National Institute of Environmental Research) was used for the base and sensitivity simulations. SCCs (Source Classification Codes) in the EI were utilized to group the emissions into area, mobile, and point source categories. PPM and $PM_{2.5}$ precursor emissions from each source category were reduced by 50%. In turn, air quality was simulated with CMAQ during January, April, July, and October in 2014 for the BFM runs. In this study, seasonal variations of SMA $PM_{2.5}$ self-sensitivities to PPM, $SO_2$, and $NH_3$ emissions can be observed even when the seasonal emission rates are almost identical. For example, when the mobile PPM emissions from the SMA were 634 TPM (Tons Per Month) and 603 TPM in January and July, self-contributions of the emissions to monthly mean $PM_{2.5}$ were $2.7{\mu}g/m^3$ and $1.3{\mu}g/m^3$ for the months, respectively. Similarly, while $NH_3$ emissions from area sources were 4,169 TPM and 3,951 TPM in January and July, the self-contributions to monthly mean $PM_{2.5}$ for the months were $2.0{\mu}g/m^3$ and $4.4{\mu}g/m^3$, respectively. Meanwhile, emission-to-$PM_{2.5}$ conversion rates of precursors vary among source categories. For instance, the annual mean conversion rates of the SMA mobile, area, and point sources were 19.3, 10.8, and $6.6{\mu}g/m^3/10^6TPY$ for $SO_2$ emissions while those rates for PPM emissions were 268.6, 207.7, and 181.5 (${\mu}g/m^3/10^6TPY$), respectively, over the region. The results demonstrate that SMA $PM_{2.5}$ responses to the same amount of reduction in precursor emissions differ for source categories and in time (e.g. seasons), which is important when the cost-benefit analysis is conducted during air quality improvement planning. On the other hand, annual mean $PM_{2.5}$ sensitivities to the SMA $NO_x$ emissions remains still negative even after a 50% reduction in emission category which implies that more aggressive $NO_x$ reductions are required for the SMA to overcome '$NO_x$ disbenefit' under the base condition.

• Advances in Traditional Medicine
• /
• v.6 no.2
• /
• pp.79-85
• /
• 2006

In order to study the effect of acupuncture stimulation on bone mineral density (BMD), using the ovariectomized (OVX) rat model, we assessed the degree of osteopenia by dual-energy X-ray absorptiometry, measured the level of locomotor activity using a metabolism measuring system, and performed histological studies of bone tissue. Twenty-four female Wistar rats (8 weeks old, 160 - 180 g)were divided into three groups. Rats in the OVX-A group underwent ovariectomy followed by acupuncture stimulation. The OVX rats in the Vehicle control group were not treated with acupuncture as a control. The rats in the control group received neither ovariectomy nor acupuncture. Acupuncture stimulation for 12 weeks in the OVX-A group inhibited the reduction in BMD of the femoral bones caused by ovariectomy. Moreover, in the two OVX groups, there was no clear difference in the level of locomotor activity between the active and resting phases prior to acupuncture stimulation in each rat, and the pattern of locomotor activity was irregular. After acupuncture stimulation of the OVX-A rats, the pattern of locomotor activity became diphasic with clear active and resting phases, as was observed in the Control group. On histological studies, the continuity of trabecular bone was maintained more favorably and bone mass was higher in the OVX-A group than in the vehicle control group. These results suggest that the increased locomotor activity that had been induced by acupuncture stimulation increased the BMD.

• Journal of Environmental Science International
• /
• v.32 no.9
• /
• pp.613-626
• /
• 2023

This study investigates the impact of increased adoption of eco-friendly vehicles on ozone (O₃) concentrations in South Korea, utilizing the community multiscale air quality (CMAQ) model. In the summer of 2017 (June-August), we conducted two experiments: a BASE experiment, representing baseline emissions, and an R_30 experiment, involving a 30% emission reduction due to eco-friendly vehicles. The contrast between these experiments reveals that, while most air pollutants decreased with reduced vehicle emissions, O₃ concentrations surprisingly increased (up to 2.1 parts per billion) across South Korea. A further examination of O₃ concentration changes was conducted by analyzing daytime and nighttime variations as well as wind direction. During the daytime, O₃ concentrations notably rose near metropolitan areas due to reduced O₃ titration (O₃ + NO → O₂ + NO₂) resulting from emission reductions. At nighttime, O₃ concentrations exhibited a greater increase, attributed to the transport of daytime-generated O₃ to rural regions. Notably, the impact of reduced emissions in metropolitan areas on O₃ concentrations in downwind areas varied depending on the prevailing wind direction. These findings highlight that the promotion of eco-friendly vehicles, though effective in lowering certain air pollutants, might not directly influence O₃ concentrations. This study underscores the need to comprehensively understand the complicated chemistry of O₃ to develop effective strategies for air quality management.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.4
• /
• pp.517-533
• /
• 2018

We utilize the CAMx (Comprehensive Air Quality Model with eXtensions) system and the PSAT (Particulate Source Apportionment Technology) diagnostic tool to determine the $PM_{2.5}$ concentration and to perform its source apportionment in the southeastern region of South Korea. For a year-long simulation, eight local authorities in the region such as Pohang, Daegu, Gyeongju, Ulsan, Busan-Gimhae, Gosung-Changwon, Hadong, and all remaining areas in Gyeongsangnam-do, are selected as source areas based on the emission rates of $NO_x$, $SO_x$, VOC, and primary PM in CAPSS (Clean Air Policy Support System) 2013 emissions inventory. The CAMx-PSAT simulation shows that Pohang has the highest $PM_{2.5}$ self-contribution rate (25%), followed by Hadong (15%) and Busan-Gimhae (14%). With the exception of Pohang, which has intense fugitive dust emissions, other authorities are strongly affected by emissions from their neighboring areas. This may be measured as much as 1 to 2 times higher than that of the self-contribution rate. Based on these estimations, we conclude that the efficiency of emission reduction measures to mitigate $PM_{2.5}$ concentrations in the southeastern region of South Korea can be maximized when the efforts of local or regional emission controls are combined with those from neighboring regions. A comprehensive control policy planning based on the collaboration between neighboring jurisdictional boundaries is required.

• Clean Technology
• /
• v.24 no.4
• /
• pp.307-314
• /
• 2018

In this study, NMO (Natural Manganese Ore), $MnO_2$, and $Mn_2O_3$ catalysts were used in the selective catalytic reduction process to remove nitrogen oxides (NOx) using $NH_3$ as a reducing agent at low temperatures in the presence of oxygen. In the case of the NMO (Natural Manganese Ore), it was confirmed that the conversion of nitrogen oxides in the stability test did not change even after 100 hours at 423 K. The Kinetics experiments were carried out within the range where heat and mass transfer were not factors. From a steady-state Kinetics study, it was found that the low-temperature SCR reaction was zero order with the respect to $NH_3$ and 0.41 ~ 0.57 order with the respect to NO and 0.13 ~ 0.26 order with the respect to $O_2$. As temperature increases, the reaction order decreases as a result of $NH_3$ and oxygen concentration. It was confirmed that the reaction between the $NH_3$ dissociated and adsorbedon the catalyst surface and the gaseous nitrogen monoxide (E-R model) and the reaction with the adsorbed nitrogen monoxide (L-H model) occur.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.2
• /
• pp.34-38
• /
• 2013

AC Losses for face to face stacks of four identical coated conductors (CCs) were numerically calculated using the H-formulation combined with the E-J power law and the Kim model. The motive sample was the face to face stack of four 2 mm-wide CC tapes with 2 ${\mu}m$ thick superconducting layer of which the critical current density, $J_c$, was $2.16{\times}10^6A/cm^2$ on IBAD-MgO template, which was suggested for the mitigation of ac loss as a round shaped wire by Korea Electrotechnology Research Institute. For the calculation the cross section of the stack was simply modeled as vertically aligned 4 rectangles of superconducting (SC) layers with $E=E_o(J(x,y,t)/J_c(B))^n$ in x-y plane where $E_o$ was $10^{-6}$ V/cm, $J_c$(B) was the field dependence of current density and n was 21. The field dependence of the critical current of the sample measured in four-probe method was employed for $J_c$(B) in the equation. The model was implemented in the finite element method program by commercial software. The ac loss properties for the stacks were compared with those of single 4 cm-wide SC layers with the same critical current density or the same critical current. The constraint for the simulation was imposed in two different ways that the total current of the stack obtained by integrating J(x,y,t) over the cross sections was the same as that of the applied transport current: one is that one fourth of the external current was enforced to flow through each SC. In this case, the ac loss values for the stacks were lower than those of single wide SC layer. This mitigation of the loss is attributed to the reduction of the normal component of the magnetic field near the SC layers due to the strong expulsion of the magnetic field by the enforced transport current. On the contrary, for the other case of no such enforcement, the ac loss values were greater than those of single 4cm-wide SC layer and. In this case, the phase difference of the current flowing through the inner and the outer SC layers of the stack was observed as the transport current was increased, which was a cause of the abrupt increase of ac loss for higher transport current.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.500-509
• /
• 2013

This study reports a numerical analysis of the internal flow characteristics of the integrated urea-SCR muffler system with the various geometries of the multi-perforated tube which is set up between the muffler inlet and in front of SCR catalysts. The multi-perforated tube is generally used to disperse uniformly the urea-water solution spray and to make better use of the SCR catalyst, resulting in the increased $NO_x$ reduction and decreased ammonia slip. The effects of the multi-perforated tube orifice area ratios on the velocity distributions in front of the SCR catalyst, which is ultimately quantified as the uniformity index, were investigated for the optimal muffler system design. The steady flow model was applied by using a general-purpose commercial software package. The air at the room temperature was used as a working fluid, instead of the exhaust gas and urea-water solution spray mixture. From the analysis results, it was clarified that the multi-perforated tube geometry sensitively affected to the formation of the bulk swirling motion inside the plenum chamber set in front of the SCR catalyst and to the uniformity index of the velocity distribution produced at the inlet of the catalyst.

• Journal of Korean Academy of Nursing
• /
• v.29 no.2
• /
• pp.418-428
• /
• 1999

The main purpose of this study was to identify the effects of group social support and individual social support on the reduction of burden and improvement in family functioning of families with asthmatic children. The design of this study was a randomized pre-posttest quasi-experimental design to compare the two experimental groups. The theoretical framework for this study was derived from the study of burden in family caregivers by Suh and Oh (1993) based on the main effect model of social support theories. The data were collected from February 12, 1998 to May 29, 1998 at the pediatric out patient department of a university hospital located in Suwon city. The sample consisted of 39 family members who were identified as families with asthmatic children, Eighteen subjects were randomly assigned to the group social support group and 21 were assigned to the individual social support group. Group and individual social support members were seen for 60 to 90 minutes, four times over one to three weeks. The instruments used in this study were the Burden Scale developed by Suh & Oh(1993), the Visual Analogue Scale, and the Family Adaptability Cohesion Evaluation Scale(FACES-III) developed by Olson, Portner, and Lavee(1985). The collected data were analyzed using Mann-Whitney test, x$^2$-test, Wilcoxon sign rank test, t-test, ANOVA (Scheff), Pearson correlation coefficient. multiple regression, and social support process and content analysis. The results are as follow : 1. There was no significant difference before the experimental treatment among the subjects in the group social support group and individual social support group for general characteristics, burden, or family functioning. 2. Hypothesis 1 : “There will be a greater reduction on the burden score of the group social support group compared to the individual social support group” was not statistically significant(U＝174.5, p＝.683). The burden scores showed a significant decrease after participation in social support as compared to before participation for both groups. However there was a tendency for more reduction in the burden scores for the group social support than for individual social support. 3. Hypothesis 2 : “There will be a greater improvement in the family functioning scores for the group social support group compared to the individual social support group” was not statistically significant(U＝153.0. p＝.309). There was a tendency toward improvement in the family functioning scores of the group social support as compared to that of the individual social support. 4. According to the length of the treatment period, families with asthmatic children displayed affirmative responses, and the families set up a self-help group of mothers with asthmatic children in order to share their experiences, to get information and to solve their problems. In conclusion, it was found that group social support was the more effective nursing intervention for reducing burden and for improving family functioning of families with asthmatic children.