• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.6
• /
• pp.90-96
• /
• 2009

Ultrasonic method using SH(shear horizontal) wave has been developed to determine the surface damage in fatigued material. Fatigue damages based on propagation energy were analyzed by multi-regression analysis in interrupted fatigue test specimen including CrMoV and 12Cr alloy steel. From the test results, as the fatigue damage increased the propagation time of the launched waves increased and amplitude of wavelet decreased. Also, analysis for the waveform modulation showed a reliable estimation, with confidence limit of 97% for 12Cr steel and 95% for CrMoV steel, respectively. Therefore, It is thought that SH ultrasonic wave technique can be applied to determine fatigue damage of in-service component nondestructively.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.350-352
• /
• 1991

• Bulletin of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.773-774
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.1921-1922
• /
• 2007

• Nuclear Engineering and Technology
• /
• v.35 no.6
• /
• pp.507-514
• /
• 2003

Recently dry decontamination/surface-cleaning technology using plasma etching has been focused in the nuclear industry. In this study, the applicability of this new dry processing technique are experimentally investigated by examining the etching reaction of $UO_2$, Co, and Mo in r.f. plasma with the etchant gas of $CF_4/O_2$ mixture. $UO_2$ is chosen as a representing material for uranium and TRU (TRans-Uranic) compounds while metallic Co and Mo are selected because they are the principal contaminants in the used metallic nuclear components such as valves and pipes made of stainless steel or inconel. Results show that in all cases maximum etching rate is achieved when the mole fraction of $UO_2\;in\;CF_4/O_2$ mixture gas is $20\%$, regardless of temperature and r.f. power. In case of $UO_2$, the highest etching reaction rate is greater than 1000 monolayers/min. at $370^{\circ}C$ under 150 W r.f. power which is equivalent to $0.4{\mu}m/min$. As for Co, etching reaction begins to take place significantly when the temperature exceeds $350^{\circ}C$. Maximum etching rate achieved at $380^{\circ}C\;is\;0.06{\mu}m/min$. Mo etching reaction takes place vigorously even at relatively low temperature and the reaction rate increases drastically with increasing temperature. Highest etching rate at $380^{\circ}C\;is\;1.9{\mu}m/min$. According to OES (Optical Emission Spectroscopy) and AES (Auger Electron Spectroscopy) analysis, primary reaction seems to be a fluorination reaction, but carbonyl compound formation reaction may assist the dominant reaction, especially in case of Co and Mo. Through this basic study, the feasibility and the applicability of plasma decontamination technique are demonstrated.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.475-481
• /
• 2013

By using ionic liquid 1-hexylpyridinium hexafluorophosphate ($HPPF_6$) based carbon ionic liquid electrode (CILE) as the substrate electrode, a $CoMoO_4$ nanorods and myoglobin (Mb) composite was casted on the surface of CILE with chitosan (CTS) as the film forming material to obtain the modified electrode (CTS/$CoMoO_4$-Mb/CILE). Spectroscopic results indicated that Mb retained its native structures without any conformational changes after mixed with $CoMoO_4$ nanorods and CTS. Electrochemical behaviors of Mb on the electrode were carefully investigated by cyclic voltammetry with a pair of well-defined redox peaks from the heme Fe(III)/Fe(II) redox center of Mb appeared, which indicated that direct electron transfer between Mb and CILE was realized. Electrochemical parameters such as the electron transfer number (n), charge transfer coefficient (${\alpha}$) and electron transfer rate constant ($k_s$) were estimated by cyclic voltammetry with the results as 1.09, 0.53 and 1.16 $s^{-1}$, respectively. The Mb modified electrode showed good electrocatalytic ability toward the reduction of trichloroacetic acid in the concentration range from 0.1 to 32.0 mmol $L^{-1}$ with the detection limit as 0.036 mmol $L^{-1}$ ($3{\sigma}$), and the reduction of $H_2O_2$ in the concentration range from 0.12 to 397.0 ${\mu}mol\;L^{-1}$ with the detection limit as 0.0426 ${\mu}mol\;L^{-1}$ ($3{\sigma}$).

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.10-14
• /
• 2012

Recently the low alloy steel plate made with manganese-molybdenum is used widely in steam drum and separator of the new coal-fired power plant boiler. This material is suitable for the vapor storage of high pressure and high temperature. The high temperature creep strength of Mn-Mo alloy is higher than the carbon plate(SA516) that used in the subcritical pressure boiler. It reduces the thickness of the pressure vessel and makes the lightweight possible. Recently in the power plant boiler operation and production process, the damage has happened frequently in the heat affected zone and base material according to the hydrogen crack and delayed crack. This paper describes the research result about the damage case experienced in the boiler steam drum production process and present the optimum manufacture method for the similar damage prevention of recurrence.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1773-1780
• /
• 2018

Objective: This study was to evaluate effects of mixed plant oils (identified as mixed oil 1 [MO1] and mixed oil 2 [MO2]) on performance, serum composition, viscera percentages, meat quality, and fatty acid deposition of broilers. Methods: A total of 126 one-day-old Arbor Acres male broiler chicks (weighing $44.91{\pm}0.92g$) were randomly allocated to 1 of 3 treatments with 7 replicate pens per treatment (6 broilers per pen). Dietary treatments included a corn-soybean basal diet supplemented with 3% soybean oil (CTR), basal diet with 3% MO1 (a mixture of 15% corn oil, 10% coconut oil, 15% linseed oil, 20% palm oil, 15% peanut oil and 25% soybean oil; MO1), or basal diet with 3% MO2 (a combination of 50% MO1 and 50% extruded corn; MO2). The trial consisted of phase 1 (d 1 to 21) and phase 2 (d 22 to 42). Results: Compared to CTR, broilers fed MO (MO1 or MO2) had greater (p<0.05) average daily gain in phase 1, 2, and overall (d 1 to 42), redness in thigh muscle, concentrations of serum glucose, serum albumin, saturated fatty acids (SFA) and n-6/n-3 polyunsaturated fatty acids (PUFA) ratio in breast muscle, while these broilers also showed lower ($p{\leq}0.05$) drip loss and concentrations of C18:3n-3 and PUFA/SFA ratio in breast muscle. Broilers fed MO2 had higher (p<0.05) liver percentage, while broilers fed MO1 had lower ($p{\leq}0.05$) feed conversion ratio in phase 1 and increased (p<0.05) contents of C18:2n-6, C20:5n-3, C22:6n-3, and n-3 PUFA in breast muscle compared to CTR. Conclusion: Mixed plant oils had positive effects on performance, serum parameters, meat quality, liver percentage and fatty acid deposition in broilers, which indicates they can be used as better dietary energy feedstocks than soybean oil alone.

• Journal of Powder Materials
• /
• v.17 no.3
• /
• pp.223-229
• /
• 2010

Iron(Fe)-Molybdenum(Mo) alloyed nanoparticles and nanowires were produced by the chemical vapor condensation(CVC) process using the pyrolysis of iron pentacarbonyl($Fe(CO)_5$) and Molybdenum hexacarbonyl($Mo(CO)_6$). The influence of CVC parameter on the formation of nanoparticle, nanowire and size control was studied. The size of Fe-Mo alloyed nanoparticles can be controlled by quantity of gas flow. Also, Fe-Mo alloyed nanowires were produced by control of the work chamber pressure. Moreover, we investigated close correlation of size and morphology of Fe-Mo nanoparticles and nanowires with atomic quantity of inflow precursor into the electric furnace as the quantitative analysis. Obtained nanoparticles and nanowires were investigated by field emission scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1174-1180
• /
• 1996

Potassium hexatitanate whisker was effectively prepared with calcination and flux method by using industrial $TiO_2$, $K_2CO_3$ and $K_2MoO_4$ as the starting materials. When it was synthesized by the calcination method, the filtrate after boiling water treatment was required a neutralization, as the pH of filtrate was higher than 9. Because K component was very small, recovery of K component was not economically suitable. In case of flux method, flux was recovered 96.1% of Mo component and 91.8% of K component at $K_2MoO_4$, for 10th treatment in boiling water of 100ml to 10g.