• Research in Plant Disease
• /
• v.12 no.3
• /
• pp.178-184
• /
• 2006

The 18 isolates of soybean red crown rot pathogen(Calonectria ilicicola) were isolated from infected soybean plants showing chlorosis symptom and red perithecia sign in 2002 and 2003 season in Korea. The morphological characteristics of the typical isolate SC03-15, such as macroconidia and macrovesicles in anamorph as well as perithecia, asci and ascospores in teleomorph, were observed from red crown rot pathogens. The perithecia were red-brown globose to ovoid, and $357.9(312.5{\sim}391.5.7){\mu}m$ high and $474.3(419{\sim}535){\mu}m$ diameter. Asci were hyaline and clavate and included 8 ascospores, which were straight to slightly curved, 1(-3)-septate, and $36.9(31.1{\sim}49.4){\times}5.2(4.5{\sim}6.1){\mu}m$. Macroconidia in anamorph were cylindrical, hyaline and in size $73.2(68.1{\sim}77.6){\times}5.8(4.9{\sim}6.8){\mu}m$. Further identification process was performed through molecular method, such as a phylogenetic analysis by rDNA sequencing of ITS and $\beta$-tubuline genes of all isolates tested in this study. All isolates were identified as Calonectria ilicicola by DNA sequencing of ITS and $\beta$-tubuline genes, and morphological characteristics.

• The Korean Journal of Mycology
• /
• v.21 no.2
• /
• pp.120-126
• /
• 1993

Morphological characteristics in the anamorphic states were described in three species of powdery mildew fungi, Microsphaera akebiae, M. picrasmae and M. schizandrae, which were parasitic on Akebia quinata, Picrasma quassioides, and Schizandra chinensis, respectively. All species were flexuous in foot-cells of conidiophores, producing conidia singly on conidiophores, devoid of fibrosin bodies in conidia, and producing germ tubes on the end of conidia.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.318-323
• /
• 1981

This study was conducted to establish an effective radiation treatment and selection method for induced mutants in M_1 population of soybean treated with gamma-ray. About 64% of total M_1 plants was reduced in plant height up to 50 - 60% and among which 60 - 70% of the plants were contained mutations in M_2 generation. About 60% of the MI plants have born 6 - 15 seeds per plant and 50 - 60% of their progenies produced mutants in M_2 generation. Positive correlation between plant height and number of seeds per plant in M_1 population was found. Higher visible macro-mutation rate in M_2 was observed in the groups of reduced plant height and seed number in the M_1 generation, whereas the frequency of chlorophyll mutation was increased in the group of less damaged plants. The size of mutation sector was increased with reduction in number of seeds per M_1 plant and the mutants were occurred at random in all the parts of M_1 plants. For the effective selection of mutants in soybean mutation breeding, the M_1 seeds should be harvested from the radiation damaged M_1 plants with the application of higher doses of mutagens, and handling M_2 generation by bulk population method is recommendable.

• Proceedings of the Petrological Society of Korea Conference
• /
• 2003.05a
• /
• pp.26-29
• /
• 2003

• Electrical & Electronic Materials
• /
• v.21 no.1
• /
• pp.5-10
• /
• 2008

• Proceedings of the Korean Vacuum Society Conference
• /
• 1995.02a
• /
• pp.057-58
• /
• 1995

극소전자 디바이스의 고집적화에 의해 박막배선의 선폭은 0.5$mu extrm{m}$ 이하로 축소되고 있고 상대적으로 높은 전류밀도가 흐르게 된다. 높은 전류밀도하에서는 현재 일반적으로 사용되고 있는 Al을 기본으로 하는 박막배선에서의 electromigration에 의한 결함 발생 그리고 비교적 낮은 전기전도도가 심각한 문제점으로 제기된다. 본 연구에서는 Al과 고전기전도도 물질인 Ag, Cu, 그리고 Au 박막배선에 대해 electromigration에 대한 저항성, 즉 activation energy를 측정 비교함으로써 차세대 극소전자 디바이스를 위한 박막배선재료로서의 가능성을 알아보고자 한다. Electromigration test 및 activation energy를 구하기 위해 순수 Ag, Cu, Al, Au 박막배선을 0.05$\mu\textrm{m}$ 두께, 100$\mu\textrm{m}$ 선폭, 그리고 5000$\mu\textrm{m}$ 길이로 SiO2 열산화막 처리된 pp-Si(100) 기판 위에 진공 증착시켰다. 가속화 실험을 위해 인가된 d.c. 전류밀도는 2$\times$106A/$ extrm{cm}^2$ 이었고, Al과 Au에서는 6$\times$106A/$\textrm{cm}^2$이었다. 실온에서 24$0^{\circ}C$까지의 온도범위에서 d.c.인가후의 저항변화를 측정하여 Median-Time-to-Failure(MTF)를 구한 후 Black 방정식을 이용하여 activation energy를 측정하였다. Activation energy는 Cu가 1.34eV로서 가장 높게 나타났고 Au가 1.01eV, Al이 0.66eV, Ag가 0.29eV의 순으로 측정되었다. 따라서 Cu와 Au 박막배선의 경우 Al보다 electromigration에 대한 저항력이 강한 고활성화에너지 특성을 갖는 고전기전도도 재료로서 차세대 극소전자 디바이스를 위한 대체 박막배선재료로서의 가능성을 보인다.

• Electronics and Telecommunications Trends
• /
• v.30 no.1
• /
• pp.12-20
• /
• 2015

1980년대 초 1세대 아날로그 이동통신시스템이 처음 도입된 이래 이동통신은 2세대, 3세대를 거쳐서 4세대 시스템으로 진화되었다. 기존의 이동통신은 주로 가정, 사무실 등 보행자 중심의 Nomadic 환경에 최적화된 형태이고 120km/h 이상의 고속환경에서는 통신접속이 끊어지지 않는 정도의 서비스에 한정되었다. 2007년 애플의 iPhone이 출현한 이래 스마트폰 중심의 모바일 데이터 서비스 사용량이 매년 가파른 증가세를 보이고 있으며 보행자 중심의 저속환경뿐만 아니라 지하철, 고속철 등 그룹이동체 내에서의 모바일 데이터 서비스도 점차 중요해지고 있다. 그룹이동체 내에서 일반 사용자들은 차량 외부의 이동통신망을 통해 직접 서비스를 받을 수도 있고 이동무선백홀과 결합된 WLAN 혹은 펨토셀과 같은 차량 내 이동소형셀형태로 서비스를 받을 수 있다. 본고에서는 그룹이동체 내의 이동소형셀 지원을 위한 이동무선백홀 기술동향을 분석하고 향후 수 Gbps급 이상의 데이터 전송속도를 지원할 수 있는 밀리미터파 기반의 이동무선백홀 기술을 소개한다.

• Electrical & Electronic Materials
• /
• v.17 no.6
• /
• pp.17-21
• /
• 2004

1948년 J. Bardeen 등에 의해 발명된 게르마늄 트랜지스터 이래로 반도체 공업은 숨 가쁘게 발전하여 현재는 $0.1\mu\textrm{m}$ 수준의 크기를 지나 $0.01\mu\textrm{m}$ 수준의 트랜지스터까지도 시연되고 있다［1,2］. 집적회로의 발전에는 대면적의 식각기술의 뒷받침과 끝임 없는 소재의 개발이 그 밑바탕이 되고 있어 앞으로의 발전에 있어서도 패턴닝 기술과 소재 기술은 다음 세대에도 반도체 산업발전의 원동력이 될 것임을 짐작해 볼 수 있다. (중략)

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.7
• /
• pp.279-286
• /
• 2021

Recently, We are carrying out a policy of physical distancing of at least 1m from each other to prevent the spreading of COVID-19 disease in public places. In this paper, we propose a method for measuring distances between people in real time and an automation system that recognizes objects that are within 1 meter of each other from stereo images acquired by drones or CCTVs according to the estimated distance. A problem with existing methods used to estimate distances between multiple objects is that they do not obtain three-dimensional information of objects using only one CCTV. his is because three-dimensional information is necessary to measure distances between people when they are right next to each other or overlap in two dimensional image. Furthermore, they use only the Bounding Box information to obtain the exact coordinates of human existence. Therefore, in this paper, to obtain the exact two-dimensional coordinate value in which a person exists, we extract a person's key point to detect the location, convert it to a three-dimensional coordinate value using Stereo Vision and Camera Calibration, and estimate the Euclidean distance between people. As a result of performing an experiment for estimating the accuracy of 3D coordinates and the distance between objects (persons), the average error within 0.098m was shown in the estimation of the distance between multiple people within 1m.

• Journal of Navigation and Port Research
• /
• v.42 no.1
• /
• pp.17-24
• /
• 2018

The Russian Global Navigation Satellite System (GLONASS) has been fully recovered since October 2011, and it has been significantly modernized. The recently launched GLONASS 752 was set for successful performance on October 16, 2017 and has resulted in 24-satellite constellation with 22 second-generation (GLONASS-M) satellites, and a third-generation (GLONASS-K) satellite. Therefore, this paper is focused on not only the identified navigation parameters, but also the performance analysis of the project based on its real data received from the studied satellites. It is verified that the 5-11 satellites are available for receiving navigation signal at this time. The obtained values of GDOP, PDOP, HDOP, VDOP, and TDOP are 2.790, 2.424, 1.169, 2.123, and 1.381, noted respectively in standard deviation. In fact, the level of positioning precision is about 1.4m in standard deviation. As a result, the positioning performances of the measured GLONASS and GPS are virtually identical. Therefore, we determine that the GLONASS is expected to be expanded for future applications.