• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.308-312
• /
• 2013

Active carbons with high specific surface area and micro pore structure were prepared from the coconut shell char using the chemical activation method of NaOH. The preparation process has been optimized through the analysis of experimental variables such as activating chemical agents to char ratio and the flow rate of gas during carbonization. The active carbons with the surface area (2,481 $m^2/g$) and mean pore size (2.32 nm) were obtained by chemical activation with NaOH. The electrochemical performances of hybrid capacitor were investigated using $LiMn_2O_4$, $LiCoO_2$ as the positive electrode and prepared active carbon as the negative electrode. The electrochemical behaviors of hybrid capacitor using organic electrolytes ($LiPF_6$, $TEABF_4$) were characterized by constant current charge/discharge, cyclic voltammetry, cycle and leakage tests. The hybrid capacitor using $LiMn_2O_4$/AC electrodes had better capacitance than other hybrid systems and was able to deliver a specific energy as high as 131 Wh/kg at a specific power of 1,448 W/kg.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.359-367
• /
• 1999

CsI(Li) single crystals doped with 0.02, 0.1, 0.2 and 0.3 mole% lithium as an activator were grown by Czochralski method. The lattice structure of grown CsI(Li) single crystal was bcc, its lattice constant was $4.568\;{\AA}$. The absorption edge of CsI(Li) single crystal was 245 nm, and the spectral range of luminescence was $300{\sim}600\;nm$, its maximum luminescence intensity appeared at 425 nm. The energy resolutions of CsI(Li) single crystal doped with 0.2 mole% lithium were 14.5% for $^{137}Cs$(662 keV), 11.4% for $^{54}Mn$(835 keV) and 17.7% and 7.9% for $^{22}Na$(511 keV and 1275 keV), respectively. The relation formula of $\gamma$-ray energy versus energy resolution was ln (FWHM%) = -0.893lnE + 8.456 and energy calibration formula was ${\log}E_r=1.455\;{\log}(ch.)-1.277$. The phosphorescence decay time of CsI(Li) crystal doped with 0.2 mole% lithium was 0.51 s at room temperature, and its time resolution measured by CFT(constant-fraction timing method) was 9.0 ns.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.63-68
• /
• 2010

The $Li_4Ti_5O_{12}$/AC composite was prepared by sol-gel process with ultrasonication. The prepared composite was characterized by SEM, XRD and TG analysis, and their electrochemical behaviors were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and charge-discharge test in 1M $LiBF_4$/PC electrolyte. From the results, the $Li_4Ti_5O_{12}$ particles coated on AC surface had an average particle size of 100 nm and showed spinel-framework structure. When the potential range of the $Li_4Ti_5O_{12}$/AC composite was extended from 0.1 to 2.5 V, redox peaks and electric double layer property were revealed. The initial discharge capacity of $Li_4Ti_5O_{12}$/AC composite was 218 mAh $g^{-1}$ at 1 C. The enhancement of discharge capacity was attributed to electric double layer of added activated carbon.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.449-449
• /
• 2010

유기발광소자(organic light-emitting diodes, OLEDs)는 저공정비용, 경량화, 가용성 및 대면적화 등의 장점으로 조명 분야와 디스플레이 분야로의 응용 가능성으로 인해 크게 주목을 받아 왔다. 이러한 OLED 소자의 고효율, 고휘도 및 저소비전력 등을 구현하기 위해서는 전극으로부터 전하 주입 층으로 효율적인 전하 주입이 요구된다. 즉, 각 전극의 폐르미 준위로부터 전하 전도준위대로의 전하주입 장벽이 없어야 한다. 본 연구에서는 홀 주입장벽이 없는 정공주입 층으로 $MoO_x$(molybdenum oxide)가 도핑된 NPB(N, N'-diphenyl-N, N'-bis(1-naphthyl)-1,1'-biphenyl-4,4'-diamine) 층을 사용하여 hole-only 소자를 제작하고 전류-전압 특성을 통해 양극으로부터 홀주입 층으로의 hole-ohmic 특성을 고찰했다. 또한, 전자 주입장벽이 없는 전자주입 층으로 $C_{60}$(fullerene)/LiF(lithum fluoride)의 이종 층을 사용하여 electron-only 소자를 제작하고 음극으로부터 전자주입 층으로의 전자 ohmic 특성을 조사했다. 또한, 전극으로부터 전하주입 층으로 ohmic 특성을 더 자세히 이해하기 위하여 전하주입 층의 자외선 광방출 스펙트럼(ultraviolet photoemission spectra)을 조사했다. 한편, glass/ITO/$MoO_x$-doped NPB (x%: x=0,25, 50 및 75; 5nm)/NPB (63nm)/$Alq_3$ (37nm)/$C_{60}$ (5nm)/LiF (1nm)/Al (100nm)로 구성된 all-ohmic OLED 소자의 발광특성은 $MoO_x$의 도핑 농도가 25%이상일 때 최적의 특성을 보여줬다. 이러한 현상은 정공주입 층에서 p형 도핑 농도의 증가에 따른 정공 농도의 증가에 기인한다. 또한 $MoO_x$의 도핑 농도의 증가에 따라 정공주입 층의 new gap state와 전극의 페르미 준위의 pinning에 기인한다. 25%의 $MoO_x$을 가진 OLED소자는 7.2V의 낮은 전압에서 $58300 cd/m^2$의 높은 휘도를 보여줬다.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.274-279
• /
• 2006

To synthesize ZnO colloidal solution by a sol-gel process, zinc acetate ($C_{4}H_{6}O_{4}Zn{\cdot}2H_{2}O{\cdot}0.2\;mol$) and lithium hydroxide ($LiOH{\cdot}H_{2}O{\cdot}0.14\;mol$) in the ethanol were added to the solution containing a dispersing agent, hydroxypropyl cellulose (HPC). The nanosize and physical shape of the synthesized ZnO particles were determined by HPC acting as the dispersing agent. Nanosized ZnO particles were also obtained by a precipitation method based on zinc-2-ethylhexagonate. The precipitates were characterized by DLS, XRD, FE-SEM, and UV-vis. As the results, the ZnO colloids tend to self-assemble into a well-ordered hexagonal close-packed structure. The ZnO nanoparticles have an average diameter of nearly 40 nm with a narrow size distribution.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.525-531
• /
• 1998

A series of $LiNbO_3$ single crystals were grown by the Czochralski method from a congruent melt, a congruent melt with 0.05 mol% $Fe_2O_3$, a congruent melt with 6 wt.% $K_2O$ and a congruent melt with 6 wt.% $K_2O$ and 0.05 mol% $Fe_2O_3$ respectively. The growth of $LiNbO_3$ crystal from a congruent melt 6 wt.% $K_2O$ leads to nearly stoichiometric specimens. This is established by studying the following properties; XRD patterns, temperature dependences of the phase transition temperature, energy of the fundamental absorption edge, the shape of the absorption band of the $OH^-$vibration and linewidths of the ESR of $Fe_{Li}^{3+}$.

• Journal of the Korean Ceramic Society
• /
• v.51 no.1
• /
• pp.25-31
• /
• 2014

New green phosphor is synthesized by reducing $LiAlO_2:xEu^{3+}$ phosphors in a low pressure $H_2$ atmosphere. The $LiAlO_2:xEu^{3+}$ prepared by a solid state reaction method is reported as red phosphor. The effect of the reduction treatment on the $LiAlO_2:xEu^{3+}$ on the crystalline phase change and photoluminescence (PL) property are characterized. The reduced phosphor had a broad green light spectrum centered at 524 nm. The PL intensity of the reduced phosphor increased to a maximum at the reduction temperature of $1100^{\circ}C$. The PL intensity decreased with a further increase in the reduction temperature. The crystalline phase constituting the reduced phosphor varied with the temperature. A new crystalline phase $Li_2Al_4O_7$ was observed at $1100^{\circ}C$. The origin of the green-light emission is discussed in relation to the crystalline phase change.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1359-1367
• /
• 2018

In this work, we investigated the spectroscopic properties of $LiY_xSr_yZrO_{3+{\alpha}:Eu^{3+}$, a red emitting nanophosphor based on $SrZrO_3$ perovskite. The synthesis process was an auto-combustion process. X-ray diffractograms show the orthorhombic structure of $SrZrO_3$. Photoluminescence (PL) excitation spectra display a split charge transfer band revealing the presence of two possible sites for the $Eu^{3+}$ ions. The emission spectra at 231 nm excitation illustrate the dominance of the $^5D_0-^7F_1$ transition, which is an indication that the smaller sized $Eu^{3+}$ ions are mostly situated at the more ordered (symmetric) $Sr^{2+}$ sites. The emission spectra at 292 nm & 397 nm excitations show the dominance of $^5D_0-^7F_2$ transition which suggests some of the $Eu^{3+}$ ions are also situated at the distorted $Zr^{4+}$ sites. Both the intensity parameters, asymmetry ratio and the decay lifetimes of the nanophosphors show dependence on $Y^{3+}$ concentration, signifying a modification in the host structure. Maximum quantum efficiency value of ${\approx}46%$ was obtained for the nanophosphors which indicate the need for improvement for practical applications. CIE coordinates show the suitability of this phosphor for both red emission in LED and as a complementary colour for white LED applications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.58-66
• /
• 2002

Acousto-optical wavelength tunable optical filters in LiNbO$_3$ have been demonstrated using taperd directional weighted coupling acoustic waveguides and Ti double diffusion technique. Conversion efficiency in excess of 61%, 86% and sidelobe intensity of -14.29㏈, -14.99㏈ were measured at a wavelength of 1551.1nm RF frequency of 173.58MHz and RF power of 35㎽ for both TE and TM input polarizations, respectivelv. A spectral width of ~l.8nm and linear tuning late of 8.6nm/MHz were demonstrated. A 2.82$mutextrm{s}$ switching time has been measured. With two channels with 2.5nmseparation, channel cross-talk was lower than -l4㏈ for single wavelength filtering due to sidelobe.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.22-22
• /
• 1991

광의 병렬처리 능력을 잘 활용한 1$\times$4 매트릭스 스위치의 구조와 전극구조를 설계하고 스위치 특성을 조사하기 위하여 beam propagation method(BPM)를 이용하여 수치계산을 하였다. 기존의 매트릭스 스위치는 대부분의 경우 방향성 결합기를 스위치 element로 이용하여 왔으나 이 결합기는 소자의 길이가 길기 때문에 단일 LinBO3 웨이퍼상에 집적할 수 있는 매트릭스 스위치의 크기가 제한되는 단점이 있다. 본 연구에서는 두 도파로 사이에 세 번째 도파로를 삽입하여 두 도파로를 결합시키는 세 도파로 결합기를 스위치 element로 사용하여 세 개의 스위치 element를 LiNbO3기판위에 직렬로 집적시킨 1$\times$4 매트릭스 스위치를 구성하였다. 스위치 element와 1$\times$4 매트릭스 스위치를 구성하였다. 스위치 element와 1$\times$4 매트릭스 스위치의 특성을 BPM을 사용하여 수치계산할 때 단일 모드 도파로의 유효 굴절을 분포는 n(X) = nm + $\Delta$ncosh-2(2x/w)의 형태로 가정했으며, 사용된 파라미터의 값은 각각 nm=2.1455, $\Delta$n=0.003, W=5$mu extrm{m}$, d=5$\mu\textrm{m}$, λ=1.3$\mu\textrm{m}$ 이고 S-파라메터의 값은 0.95927이므로 단일 모드 도파로가 된다. 계산결과 스위치 element의 결합길이는 3810$\mu\textrm{m}$이며 도파로의 길이가 결합길이와 같을 때 전극에 인가된 전압에 의한 도파로의 굴절을 섭등의 함수로 출력광의 세기를 계산한 결과 스위칭 전압은 14.85volt이고 crosstalk는 -18.9dB였다. 이 스위치 element로 구성된 1$\times$4 매트릭스 스위치는 스위칭 전압을 세 개의 전극에 적절한 조합으로 인가함으로써 한 입력 도파로에 결합된 광이 내개의 출력 도파로중 한 도파로에 스위칭 된다. 한편 수치계산의 결과를 실험적으로 확인하기 위해 스위치 element와 1$\times$4 매트릭스 스위치를 z-cut의 LinbO3 결정에 Ti을 열확산시켜 제작한 소자의 스위칭 특성을 발표할 예정이다.