• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.77-82
• /
• 2015

To increase the performance of solid oxide fuel cell operating at intermediate temperature ($600^{\circ}C{\sim}800^{\circ}C$), $Sm_{0.2}Ce_{0.8}O_2$ (SDC) thin layer was applied to the $La_{0.8}Sr_{0.2}Mn_{0.8}Cu_{0.2}O_3$ (LSMCu) cathode by sol-gel coating method. The SDC was employed as a diffusion barrier layer on the yttria-stabilized zirconia(YSZ) to prevent the interlayer by-product formation of $SrZrO_3$ or $La_2Zr_2O_7$. The by-products were hardly formed at the electrolyte-cathode interlayer resulting to reduce the cathode polarization resistance. Moreover, SDC thin film was coated on the cathode pore wall surface to extend the triple phase boundary (TPB) area.

• 한국결정성장학회지
• /
• 제22권2호
• /
• pp.78-83
• /
• 2012

$La_{1-x}Sr_xMn_{0.8}Cu_{0.2}O_{3-{\delta}}$(LSMCu)에서 Sr 함량에 따른 구조적 변화와 전기전도도에 대해 연구, 고찰하였다. EDTA citric complexing process(ECCP)로 페로브스카이트 구조를 갖는 $La_{0.8}Sr_{0.2}MnO_3$(LSM)와 $La_{1-x}Sr_xMn_{0.8}Cu_{0.2}O_3$($0.1{\leq}x{\leq}0.4$)을 제조하였다. Sr 함량이 증가할수록 격자상수와 격자부피는 감소하는 경향을 나타내었으며, 이는 Sr 함량이 증가함에 따라 B-site에서 증가하는 $Mn^{4+}$ 이온과 $Cu^{3+}$ 이온의 영향인 것으로 판단하였다. $0.1{\leq}x{\leq}0.3$ 범위의 조성에서 Sr 함량이 증가할수록 $500{\sim}1000^{\circ}C$에서 측정된 전기전도도는 증가하였고, x = 0.3 조성에서는 $750^{\circ}C$와 $950^{\circ}C$에서 각각 172.6 S/cm와 177.7 S/cm (최고값)를 나타내었다. 반면, x = 0.4 조성에서는 전기전도도가 감소하였는데 이는 입계에 발생한 산화물에 의한 영향으로 판단하였다. Sr 함량이 증가함에 따라 B-site에 존재하는 $Mn^{4+}$ 이온과 $Cu^{3+}$ 이온의 증가로 인해 격자수축이 발생하고, hopping mechanism에 관여하는 charge carrier들이 늘어나 전기전도도가 증가한 것으로 판단하였다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.185-188
• /
• 1999

Biepitaxial Y$_1Ba_2Cu_3O_{7-x}$ (YBCO) and La$_{0.2}Sr_{0.8}MnO_3$ (LSMO) thin films have been prepared on SrTiO$_3$ buffer layer and MgO seed layer grown on Al$_2O_3$(11${\bar{2}}$0)substrates by dc-sputtering with hollow cylindrical targets, respectively. We charaterized Josephson properties and significantly large magnetoresistance in YBCO and LSMO films with 45$^{\circ}$ grain boundary junction, respectively. The observed working voltage (I$_cR_n$) at 77 K in grain boundary junction was below 10${\mu}$V, which is typical I$_cR_n$ value of single biepitaxial Josephson junction. The field magnetoresistance ratio (MR) of LSMO grain boundary juncoon at 77K was enhanced to 13%, which it was significant MR value with high magnetic field sensitivity at a low field of 250 Oe. These results indicate that inserting the insulating layer instead of the grain boundary layer with metallic phase can be possible to apply a new SIS Josephson junction and a novel magnetic device using spin-polarized tunneling junction.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.33.1-33.1
• /
• 2011

Strontium doped lanthanum manganite (LSM) with perovskite structure for SOFC cathode material shows high electrical conductivity and good chemical stability, whereas the electrical conductivity at intermediate temperature below $800^{\circ}C$ is not sufficient due to low oxygen ion conductivity. The approach to improve electrical conductivity is to make more oxygen vacancies by substituting alkaline earths (such as Ca, Sr and Ba) for La and/or a transition metal (such as Fe, Co and Cu) for Mn. Among various cathode materials, $LaSrMnCuO_3$ has recently been suggested as the potential cathode materials for solid oxide fuel cells (SOFCs). As for the Cu doping at the B-site, it has been reported that the valence change of Mn ions is occurred by substituting Cu ions and it leads to formation of oxygen vacancies. The electrical conductivity is also affected by doping element at the A-site and the co-doping effect between A-site and B-site should be described. In this study, the $La_{1-x}Sr_xMn_{0.8}Cu_{0.2}O_{3{\pm}{\delta}}$ ($0{\leq}x{\leq}0.4$) systems were synthesized by a combined EDTA-citrate complexing process. The crystal structure, morphology, thermal expansion and electrical conductivity with different Sr contents were studied and their co-doping effects were also investigated.

• 한국결정성장학회지
• /
• 제21권4호
• /
• pp.175-180
• /
• 2011

이종 원자가를 가시는 Cu의 도핑이 LSM에 미치는 영향을 구조적인 분석과 열팽창계수를 통해서 고찰하였다. 고상반응을 이용하여 $La_{0.8}Sr_{0.2}Mn_{1-x}Cu_xO_3$($0{\leq}x{\leq}0.3$)음 제조하였으며, Cu의 도핑 함량에 따른 결정구조 및 열팽창계수를 확인하였다. Cu 함량이 증가함에 따라서 격자상수외 열팽창계수가 감소하는 경향을 나타냈지만, x = 0.3인 경우에는 증가 하였다. 이러한 격자상수와 열팽창계수의 변화는 Cu 이온의 B-site에서의 Mn 자리에 치환될 때 $0{\leq}x{\leq}0.2$의 범위에서는 $Cu^{3+}$의 존재로 인한 이온 반성의 감소에 의한 것으로 판단되었고, x=0.3인 경우에는 $Cu^{2+}$와 $Mn^{4+}$의 존재로 인한 산소 공공의 증가에 기인한 것이었다.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.492-497
• /
• 2018

This paper reports the efficacy of tape casting using an Ag-10 wt% CuO filler for the successful joining of a sintered $Ce_{0.9}Gd_{0.1}O_{2-{\delta}}-La_{0.7}Sr_{0.3}MnO_{3{\pm}{\delta}}$ (GDC-LSM) ceramic with a SUS 460 FC metal alloy by reactive air brazing. The as-prepared green tape was highly flexible without drying cracks, and the handling was easy when used as a filler material for reactive air brazing. Heat treatment for the GDC-LSM/SUS 460 FC joint was performed at $1050^{\circ}C$ for 30 min in air. Microstructural observations indicated a reliable and compact joining. The room temperature mechanical shear strength of the as-brazed joints was $60{\pm}8MPa$ with a cohesive failure. The flexural strength of joints was measured from room temperature up to $850^{\circ}C$, where the strength retention revealed to be almost 100% at $500^{\circ}C$. However, the joints showed a degradation in strengths at 800 and $850^{\circ}C$, exhibiting strength retentions of 57% and 37%, respectively.