• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.890-896
• /
• 2009

Li(Ni, Co, Mn)$O_2$ has been known as one of the most promising cathode materials for lithium secondary batteries. However, it has some problems to overcome for commercialization such as inferior rate capability and unstable thermal stability. In order to address these problems, surface modification of cathode materials by coating has been investigated. In the coating techniques, selection of coating material is a key factor of obtaining enhanced properties of cathode materials. In this work, we introduced solid electrolyte (Li-La-Ti-O) as a coating material on the surface of $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ cathode. Specially, we focused on a rate performance of Li-La-Ti-O coated $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ cathode. Both bare and Li-La-Ti-O 2 wt.% coated sample showed similar discharge capacity at 0.5C rate. However, as the increase of charge-discharge rate to 3C, the coated samples displayed better discharge capacity and cyclic performance than those of bare sample.

• Journal of Magnetics
• /
• 제5권3호
• /
• pp.99-101
• /
• 2000

Oxygen-plasma effects of single crystal and thin film samples of $La_{0.7}Ca_{0.3}MnO_{3-\delta}$ have been studied. Our resistivity measurements indicate that oxygen plasma treatment gives rise to oxygen diffusion into bulk regions, which results in a decrease of $Mn^{3+}$ concentration in oxygen nonstoichiometric $La_{0.7}Ca_{0.3}MnO_{3-\delta}$ and in the activation energies of Holstein's small polarons in the paramagnetic region.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.442-445
• /
• 2001

In this study, microstructural and dielectric properties of P $b_{0.83}$(L $a_{0.2}$C $e_{0.8}$)$_{0.08}$Ti $O_3$PCT ceramics as a function of Mn $O_2$ addition were investigated for 30MHz ceramic resonator application. Grain size was gradually increased according to the increase of Mn $O_2$ addition amount and showed the highest value of 1.502${\mu}{\textrm}{m}$ at the 0.9wt% Mn $O_2$. Moreover, density showed the highest value of 7.582 g/$\textrm{cm}^2$ at the 0.7wt% Mn $O_2$. All the composition ceramics, curie temperature was nearly constant around 33$0^{\circ}C$.EX>.>.>.

• 한국세라믹학회지
• /
• 제38권1호
• /
• pp.93-99
• /
• 2001

(La,Sr)MnO$_3$(LSM)-YSZ 복합체 양극에 있어서 소결온도 및 전극두께와 cathodic potential이 전극 특성에 미치는 영향을 고찰하였다. 양극의 소결은 삼상계면의 양을 결정하는 중요한 변수로 LSM 단미 양극과 YSZ가 40 wt% 포함된 LSM-YSZ 복합체 양극 모두 120$0^{\circ}C$에 소결했을 때 가장 낮은 분극저항을 나타내었다. 또한 양극 후막의 두께가 얇아지면 양극의 in-plane 저항이 증가하여 ohmic 저항이 증가하였는데, LSM-YSZ 복합체 양극의 경우 약 30$mu extrm{m}$ 정도의 전극두께가 가장 효과적인 전극 특성을 나타내었다. 한편, LSM-YSZ 복합체 양극에 -0.5 V의 cathodic potential을 인가함에 따라 양극에서 일어나는 산소환원반응의 활성이 증가하였는데, 1가 산소이온의 표면확산반응의 분극저항은 감소하였으나, 고주파수 영역에서 나타나는 산소이온전달반응의 저항은 거의 변화하지 않았다. 이것은 Mn의 환원에 의한 양극표면에 생성된 산소공공에 기인한다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3233-3237
• /
• 2010

A $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ cathode was modified by coating with Li-La-Ti-O, and the effect of the coating thickness on their electrochemical properties was studied. The thickness of the coating on the surface of $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ was increased by increasing the wt % of the coating material. The rate capability of the Li-La-Ti-O-coated electrode was superior to that of the pristine sample. 1- and 2-wt %-coated samples showed considerable improvement in capacity retention at high C rates. However, the rate capability of a 5-wt %-coated sample decreased. All the coated samples showed a high discharge capacity and slightly improved cyclic performance under a high cut-off voltage (4.8 V) condition. Results of a storage test confirmed that the Li-La-Ti-O coating layer was effective in suppressing the dissolution of the transition metals as it offered protection from the attack of the acidic electrolyte. In particular, the 2- and 5-wt %-coated samples showed a better protection effect than the 1-wt %-coated sample.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권1호
• /
• pp.1-3
• /
• 2012

LMO($LaMnO_3$) buffer layer of superconducting coated conductor was deposited on IBAD-MgO template in the plasma atmosphere at $650^{\circ}C$ which is relatively low compared with conventional deposition temperature of more than $800^{\circ}C$. Deposition method of LMO was DC sputtering, and target and deposition chamber were connected to the cathode and anode respectively. When DC voltage was applied between target and chamber, plasma was formed on the surface of target. The tape substrate was located with the distance of 10 cm between target and tape substrate. When anode bias was connected to the tape substrate, electrons were attracted from plasma in target surface to the tape substrate, and only tape substrate was heated by electron bombardment without heating any other zone. The effect of electron bombardment on the surface of substrate was investigated by increasing bias voltage to the substrate. We found out that the sample of electron bombardment had the effect of surface heating and had good texturing at low controlling temperature.

• 한국결정성장학회지
• /
• 제26권2호
• /
• pp.74-79
• /
• 2016

기계적 강도가 우수한 부분안정화 지르코니아(3 mol% Yttria Partially Stabilized Zirconia) 세라믹스의 정전기 방지를 목적으로 LSM 복합 세라믹을 제조하는 과정에서 소결체 표면에서 란타늄산화물을 주조성으로 하는 나노로드의 성장을 확인하였다. 성장조건에 따라 나노로드의 직경 및 종횡비가 크게 변화하였으며, 광학현미경으로 관찰한 결과 입사광의 집속현상으로 밝게 빛나는 나노로드를 확인하였다. SEM 및 TEM으로 관찰한 결과, La를 주성분으로 하며 Sr, Mn 그리고 Si 등이 미량 첨가된 산화물임을 확인하였고, 이들의 외형으로부터 결정상이 잘 발달된 것을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2004년도 제26회 학술발표회 초록집
• /
• pp.169-169
• /
• 2004

• 한국자기학회지
• /
• 제11권3호
• /
• pp.97-103
• /
• 2001

Water-based 졸겔 증착법을 이용하여 디결정체 La$_{2}$3/Sr$_{1}$3/MnO$_3$(LSMO) 박막을 2000$\AA$ 두께의 열 산화층을 갖는 Si(100) 기판상에 제조하여 상온에서 LSMO박막의 두께변화 따른 저 자장영역(120 Oe)에서의 터널형 자기저항 변화를 연구하였다. XRD 회절분석 결과 단일상의 페롭스카이트 결정구조임을 알 수 있었으며 RBS 스펙트럼 분석결과 박막의 조성비 La:Sr:Mn:O는 0.67:0.33:1.0:3.0임을 알 수 있었다. LSMO 박막의 자성특성 측정결과 두께 증가에 따라 포화자화는 750$\AA$까지 급격한 증가현상을 보이다 150$\AA$을 기점으로 점차 감소하는 경향을 나타내고 있으며, 보자력은 800 $\AA$ 까지 급격한 증가를 보이다 일정해지는 경향을 볼 수 있었다. 저 자장영역에서의 터널형 자기저항 변화비는 약 1500 $\AA$의 두께 영역에서 최대값을 나타냄을 알 수 있었다. 이러한 저 자장 영역에서 LSMO 박막의 터널형 자기저항 변화비의 두께 의존성은 LSMO 박막과 Si 기판의 계면에 존재하는 상호확산 현상에 의한 dead layer의 존재 및 LSMO 박막의 열처리시 발생되는 열 격자 변형 효과로 설명하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.684-688
• /
• 2001

The structural, piezoelectric and dynamic range characteristics of modified PbTi $O_3$ceramics were investigated as a function of Mn $O_2$addition. With the increase of Mn $O_2$addition, Curie temperature was decreased. As the increase of Mn $O_2$addition, mechanical quality factor ( $Q_{mt3}$) in the third over tone thickness mode was increased. Dynamic range in the third over tone thickness mode was also increased with the increase of Mn $O_2$addition. The composition ceramics added to 0.075wt% Mn $O_2$showed the best properties for SMD type resonator using third over tone thickness vibration in terms of high Curie temperature more than 31$0^{\circ}C$ and dynamic range of 49.38dB.B.