• 한국표면공학회지
• /
• 제49권6호
• /
• pp.498-506
• /
• 2016

Electrochemical measurement using a LSCF6428 electrode was performed to estimate the oxygen potential gradient in the electrode layer and a long time stability test was performed by applied potential to learn the overpotential effect on the LSCF6428 electrode. By fitting the observed impedance spectra, it was obtained that the amount of faradic current decreased with distance from cathode/electrolyte interface. Oxygen potential gradient was estimated to occur within 1 um region from the cathode/electrolyte interface at an oxygen partial pressure of 10-1 bar. The segregation of cation rich phases in the LSCF6428 electrode suggests that kinetic decomposition took place. However, impedance response after applying the potential showed no changes in the electrode compared with before applying potential. The obtained results suggest that segregation of a secondary phase in a LSCF6428 cathode is not related to performance degradation for solid oxide fuel cells (SOFCs).

• 약학회지
• /
• 제32권6호
• /
• pp.402-414
• /
• 1988

In order to clarify the receptor types and mechanisms underlying the positive inotropic effect of dopamine on the mammalian ventricular myocardium, the action potential, its first derivatives and isometric contraction of the rabbit papillary muscle were recorded using a force transducer and glass capillary microelectrodes filled with 3M KCl. The results were as follows; (1) In normal Tyrode solution, the contractile force was increased and duration of action potential was shortened with increments of dopamine concentration ($10^{-6}-10^{-4}M$). (2) The dose-response curve was markedly shifted to the right by pretreatment with reserpine (5mg/kg i.p., 24hrs prior to the experiment). (3) In 19mM $K^+-Tyrode$ solution, the duration of action potential, maximum rate of rise (V_{max}) of action potential and overshoot were significantly increased with increments of dopamine concentration ($10^{-6}-10^{-4}M$). (4) The inotropic effect of dopamine on the rabbit papillary muscle pretreated with reserpine was antagonized by atenolol ($10^{-6}M$), but not by phentolamine ($3{\times}10^{-6}M$). (5) In rabbit papillary muscle partially depolarized by 19mM $K^+-Tyrode$ solution, slow electrical response (calcium mediated action potential) as well as contraction were restored by dopamine ($10^{-4}M$); this restoration was blocked by calcium antagonists ($3{\times}10^{-5}M$ $LaCl_3{\cdot}6H_2O$, $3{\times}10^{-6}M$ diltiazem) or ${\beta}-adrenoceptor$ antagonist ($3{\times}10^{-6}M$ atenolol), but not affected by ${\alpha}-adrenoceptor$ antagonist ($10^{-5}M$ phentolamine, $3{\times}10^{-6}M$ yohimbine) or vascular dopaminergic receptor antagonist ($10^{-5}M$ haloperidol). The above results may be interpreted as that the positive inotropic effect of dopamine through both direct and indirect action are caused by increase in slow inward current ($Ca^{2+}$ influx into themyocardial cell), and the direct action is mainly due to the stimulation of ${\beta}-adrenoceptors$ in the rabbit papillary muscle.

• 한국동물학회지
• /
• 제39권3호
• /
• pp.266-272
• /
• 1996

봄에 채집한 참개구리의 난소조각 배양계를 사용하여 난자의 배란과정에 프로스타글란딘과 protein kinase C(PKC)가 관여하는 지를 조사하였다. 난소조각을 배양하면서 뇌하수체추출물(FPH) 혹은PKC의 활성제인 12-O-tetradecanoyl phorbol-13-acetate (TPA)를 처리한 후 배란율과 프로스타글란딘의 생상량을 방사면역측정법으로 조사한 결과 농도에 의존하여 난자의 배란이 유도 되었으며 프로스타글란딘의 생성이 촉진되었다. FPH와 TPA에 의한 배란과 프로스타글란딘 생성은, 4월 보다는 5월에 채집한 개구리에서 훨씬 더 효과적이었다. FPH처리는 프로스타글란딘과 함께 progestreone의 생성을 촉진하였으나 TPA는 progestreone의 생성을 촉진하지는 못하였다. FPH와 TPA에 의한 배란과ㅣ 프로스타글라딘 생성 억제제인 indomethacin에 의해서는 난자의 배랑니 억제되지는 않았다. 이러한 결과들은 참개구리 난자의 배란 과정에 PKC의 활성화가 중요한 역할을 하며, 프로스타글라딘의 생성이 매개할 것으로 생각된다.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.152-157
• /
• 2006

New precursor solution with dichloroacetic acid (DCA) was developed for fabricating high $J_c$ REBCO film. DCA based-precursor solution was coated on $LaAlO_3$(001) substrate by dip coating method. Processing parameters such as oxygen partial pressure, water vapor, ramping rate and pyrolysis temperature were controlled in order to obtain a good epitaxial film. The film with thickness of 0.5 micrometer was obtained by single coating and no crack was observed at calcined films. Oxygen partial pressure was controlled in the range of $100{\sim}1,000$ ppm and conversion heat treatment was carried out at the temperature range of $705-765^{\circ}C$. A critical transition temperature ($T_c$) of 90 K and a critical transport current density ($J_c$) of $>0.5\;MA/cm^2$ (77 K and self-field) were obtained for the GdBCO film. It is thought that fluorine-free MOD solution using DCA is promising precursor solution for fabricating high quality REBCO films.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.344-349
• /
• 2015

An interconnect is the key component of solid oxide fuel cells that electrically connects unit cells and separates fuel from oxidant in the adjoining cells. To improve their surface stability in high-temperature oxidizing environments, metallic interconnects are usually coated with conductive oxides. In this study, lanthanum nickelates ($LaNiO_3$) with a perovskite structure are synthesized and applied as protective coatings on a metallic interconnect (Crofer 22 APU). The partial substitution of Co, Cu, and Fe for Ni improves electrical conductivity as well as thermal expansion match with the Crofer interconnect. The protective perovskite layers are fabricated on the interconnects by a slurry coating process combined with optimized heat-treatment. The perovskite-coated interconnects show area-specific resistances as low as $16.5-37.5m{\Omega}{\cdot}cm^2$ at $800^{\circ}C$.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.151-156
• /
• 2015

In order to improve the properties of high-temperature superconducting wire for superconducting cable system, we optimized the electro-polishing (EP), ion-beam assisted deposition (IBAD), superconducting (SC) layer, and baking (heat) treatment. The buffer layer was deposited on electro-polished substrate with RMS roughness ($R_{RMS}$) less than 5 nm. The IBAD process was carried out at $V_{beam}$: 1100 V and $V_{accel}$: 850 V that resulted in highly crystalline film of $LaMnO_3$. Chemical composition of SC layer is key to higher critical current, and we found that composition can be determined by surface color of SC layer. We adopt a proprietary contorl system based on RGB analysis of the surface and achieved critical current of 150 A/4 mm-width. The proposed baking treatment resulted in decreasing of about 10% of fraction defects.

• 한국지구과학회지
• /
• 제21권5호
• /
• pp.595-610
• /
• 2000

본 연구에서는 경상분지 북동부 보경사화산암체에 대하여 암석성인 및 지구조적 위치에 중점을 두고 화산암류의 암석기재적 및 암석화학적 특성을 연구하였다. 보경사화산암체는 주로 내연산응회암과 규장암으로 구성되고, 유문암질 응회암이 인접하여 분포한다. 내연산응회암은 용결구조를 나타내는 부석편, 사장석, 석영, 각섬석의 반정 그리고 암편으로 구성되는 회류응회암이다. 내 연산응회암과 규장암은 각각 SiO$_2$함량이 68${\sim}$71wt%와 77wt%로서, 내연산응회암은 데사이트/유문데사이트, 규장암은 유문암의 조성을 나타낸다. 이들 화산암들은 TAS 성분도와 AFM도에서 칼크-알칼리암 계열의 특성을 보인다. 화산암류의 주성분 변화도에서TiO$_2$, Al$_2$ O$_3$, FeO$^T$, MnO, MgO, CaO는 SiO$_2$가 증가함에 따라 감소하는 경향을, K$_2$O는 증가하는 경향을 보이며, 칼크-알칼리암의 분화경향을 나타낸다. MORB값으로 표준화한 미량원소의 거미그림에서 K, Rb, Th와 Ta 함량은 비교적 부화되어 있으나, Nb, Zr, Hf, Ti, Y과 Yb 함량은 MORB와 비슷한 낮은 값을 나타낸다. 운석값으로 표준화한 희토류원소 변화도에서 경희토류원소가 중희토류원소에 비하여 많이 부화되어 있다. 이러한 미량원소 조성과 희토류원소 변화 경향은 이들 화산암류가 대륙연변부 섭입대의 조구적 환경에서 형성된 전형적인 도호 칼크-알칼리화산암임을 지시한다.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.223-227
• /
• 2009

The fruits of Cornus kousa Burg. were extracted with 80% aqueous methanol (MeOH) and the concentrated extract was partitioned with ethyl acetate (EtOAc), n-butanol (n-BuOH), and $H_2O$. From the EtOAc traction, 5 triterpenoids were isolated through repeated silica gel ($SiO_2$), octadecyl silica gel (ODS), and Sephadex LH-20 column chromatography (c.c.). These compounds were determined to be ursolic acid (1), corosolic acid (2), taraxasterol (3), betulinic acid (4), and betulinic aldehyde (5) on the basis of their spectroscopic data including electronic ionization mass spectrometry, ultraviolet spectroscopy, infrared spectroscopy, and nuclear magnetic resonance. This is the first reported isolation of these compounds from this plant. Also, compounds 1, 3, 4, and 5 show a relatively high inhibitory activity against human acyl-CoA: cholesterol acyltransferase-1 (hACAT-1) with inhibition values of $52.8{\pm}0.7$, $91.1{\pm}0.4$, $93.0{\pm}0.7$, and $96.2{\pm}0.2%$ at a concentration of $100{\mu}M$, respectively.

• 한국식품저장유통학회지
• /
• 제14권1호
• /
• pp.8-17
• /
• 2007

수도수(TW), 0.85% 식염수(0.85% NaCl) 및 0.5% Sodium metabisulfite(0.5% SMS)를 대조구로 하고 강산성 전기분해수(SAEW ; Strong Acidic Electrolyzed Water, pH 2.53, ORP 1,088 mV, HClO 91.25 ppm)와 약알칼리 전기분해수 (LAEW ; Law Altaline Electrolyzed Water, pH 8.756, ORP 534 mV, HClO 105.70 ppm)를 침지액으로 하여 박피 감자와 고구마의 초기품질 및 $5^{\circ}C$ 저장중 품질변화를 비교 검토하였다. 저장중 총페놀성 화합물 함량 변화는 감자에서는 처리구간 차이가 거의 없었으나 고구마에서는 LAEW 침지 박피 고구마가 다소 낮은 경향을 나타내었다. PPO 활성은 저장기간 전반에 걸쳐 전기분해수 침지구인 SAEW 및 LAEW 침지 박피 고구마가 상대적으로 낮은 활성을 나타내었다. 색차 변화량과 조직감의 감소량은 전기분해수 침지 박피 감자와 고구마가 TW, 0.5% NaCl 및 0.5% SMS 침지 박피 처리구에 비해 상대적으로 작았다. 총균수와 대장균 군수는 저장초기 및 저장 3-6일까지는 전기분해수와 0.5% SMS 침지 박피 감자와 고구마가 생대적으로 낮은 균수를 나타내었으며, 관능평가 결과 종합적 기호도는 저장기간 전반기인 9일 정도까지는 LaEW가 타 처리구에 비해 다소 높게 평가되었으나 유의적 차이는 거의 없었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.115.2-115.2
• /
• 2010

Autothermal reforming(ATR) processes of hydrocarbon liquids such as diesel fuels are spotlighted as methods to produce hydrogen for Fuel cell. However, the use of heavy hydrocarbons as feedstocks for hydrogen production causes some problems which increase the catalyst deactivation by the carbon deposition. Coking can be inhibited by increasing the water dissociation on the catalyst surface. This results in catastrophic failure of whole system. Performance degradation of diesel autothermal reforming leads to increase of undesirable hydrocarbons at reformed gases and subsequently decrease the performance. In this study, perovskite-based catalysts were investigated as alternatives to substitute the noble metal catalyst for the ATR of diesel. The investigated perovskite structure was based on LaCrO3. and metals were added at the A-site to enhance oxygen ion mobility, transition metals were doped on the B-site to enhance the reformation. Substituted Lanthanum chromium perovskite were made by aqueous combustion synthesis, which can produce high surface area. And for the homogeneous fuel supply, we made ultrasonic injection system for reforming. We compared durability of evaporation system and ultrasonic system for fuel injection.