• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.6
• /
• pp.922-927
• /
• 1996

In order to investigate heat-induced gelation properties of $\alpha-lactalbumin(\alpha-La),$ total free SH groups, half-cystine, and disulfide bond contents of $\alpha-La$ gels prepared in 0.1M Tris-HCI buffer(pH 8.0) were measured. The samples were heated at $90^{\circ}C$ for 40 minutes under different PH and concentrations of NaCl, $CaCl_2,$ $\alpha-La,$ N-ethylrnaleirnide(NEM), and dithiothreitol(DTT). Total free SH groups were low at high concentrations of $\alpha-La$ and at pH 6.5~8.5, and were $14.72~18.58\mu\textrm{m}ol/g$ and $14.17~16.11\mu\textrm{m}ol/g,$ respectively. Half-cystine contents of NEM-induced gels decreased with increasing concentration of NEM, and were $1.03~39.17\mu\textrm{m}ol/g.$ Disulfide bonds of DTT-induced gels increased with increasing concentration of DTT, and were $70.04~71.80\mu\textrm{m}ol/g$.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.767-772
• /
• 2012

In support of optimizing electrorefining technology for treating spent nuclear fuel, lithium drawdown has been investigated for separating actinides from molten salt electrolyte. Drawdown reaction selectivity is a major issue that requires investigation, since the goal is to remove actinides while leaving the fission products and other components in the salt. A series of lithium drawdown tests with surrogate fission product chlorides was run to obtain selectivity data with non-radioactive salts, develop a predictive model, and draw conclusions about the viability of using this process with actinide-loaded salt. Results of tests with CsCl, $LaCl_3$, $CeCl_3$, and $NdCl_3$ are reported here. Equilibrium was typically achieved in less than 10 hours of contact between lithium metal and molten salt under well-stirred conditions. Maintaining low oxygen and water impurity concentrations (<10 ppm) in the atmosphere was observed to be critical to minimize side reactions and maintain stable salt compositions. An equilibrium model has been formulated and fit to the experimental data. Good fits to the data were achieved. Based on analysis and results obtained to date, it is concluded that clean separation between minor actinides and lanthanides will be difficult to achieve using lithium drawdown.

• Journal of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.8-14
• /
• 1980

Solvolysis rate constants for methylchloroformate, $CH_3O$(CO)Cl, methylthiono-chloroformate, $CH_3O$(CS)Cl, and methylthiolchloroformate, $CH_3S$(CO)Cl, have been determined conductometrically in acetone-water and acetonitrile-water mixtures, and activation parameters, ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$, have been derived. Results show that in water-rich regions the order of rate increases as $$CH_3O(CO)Cl while in dipolar aprotic solvent-rich region this order reverses. The plots of log k vs. solvent parameters, Y, $\frac{D-1}{2D+1}$ and log($H_2$) show that the order of rate increase in water-rich region is the results of increase in $S_N1$ character. It is concluded that $CH_3S$(CO)Cl solvolyzes via $S_N1$ mechanism whereas $CH_3O$(CO)Cl reacts via $S_N2$ and $CH_3O$(CS)Cl via intermediate mechanism in water-rich region.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.73-73
• /
• 2017

Pyroprocessing at KAERI (Korea Atomic Energy Research Institute) consists of pretreatment, electroreduction, electrorefining and electrowinning. SFR (Sodium Fast Reactor) fuel is prepared from the electrowinning process which is composed of LCC (Liquid Cadmium Process) and Cd distillation et al. LCC is an electrochemical process to obtain actinides from spent fuel. In order to recover actinides inert anodes such as carbon material are used, where chlorine gas ($Cl_2$) evolves on the surface of the carbon material. And, stainless steel (SUS) crucible should be installed in large-scale electrowinning system. Therefore, the effect of chlorine on the SUS material needs to be studied. LiCl-KCl-$UCl_3$-$NdCl_3$-$CeCl_3$-$LaCl_3$-$YCl_3$ salt was contained in 2 kinds of electrolytic crucible having an inner diameter of 5cm, made of an insulated alumina and an SUS, respectively. And, three kinds of electrodes such as cathode, anode, reference were used for the electrochemical experiments. Both solid tungsten (W) and LCC were used as cathodes. Cd of 45 g as the cathode material was contained in alumina crucibles for the deposition experiments, where the crucible has an inner diameter of 3 cm. Glassy carbon rod with the diameter of 0.3 cm was employed as an anode, where shroud was not used for the anode. A pyrex tube containing LiCl-KCl-1mol% AgCl and silver (Ag) wire having a diameter of 0.1cm was used as a reference electrode. Electrodeposition experiments were conducted at $500^{\circ}C$ at the current densities of $50{\sim}100mA/cm^2$. In conclusion, Fe ions were produced in the salt during the electrodeposition by the reaction of chlorine evolved from the anode and Fe of the SUS crucible and thereby LCC system using SUS crucible showed very low current efficiencies compared with the system using the insulated alumina crucible. Anode shroud needs to be installed around the glassy carbon not to influence surrounding SUS material.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.660-664
• /
• 1998

Death of non-growing microorganisms in saline was studied to observe the inhibitory effect of NaCl in foods on the viability of microorganisms. When Leuconostoc mesenteroides LA10, Staphylococcus aureus B31 and Escherichia coli B34 were incubated in McIlvaine buffer with 0, 10, 20, 30% NaCl at $30^{\circ}C$, they survived best at pH 6, 5, 7, respectively. The survival of 5 lactic acid bacteria, 9 other bacteria and 2 yeasts was tested at pH 5, 6, 7 with 10% NaCl. Gram-positive bacteria survived in saline better than Gram-negative bacteria, and lactic acid bacteria and S. aureus survived better than other bacteria. The number of survivors decreased as concentrations of NaCl increased and as pH moved to acidic or alkaline side from the above-mentioned. When L. mesenteroides LA10 was incubated in saline with those materials which are known to protect microorganisms from the killing effect of NaCl, protective effect was not observed.

• Journal of the Korean Ceramic Society
• /
• v.21 no.3
• /
• pp.231-238
• /
• 1984

Heavy metal fluoride glasses exhibit considerable promise as high transparency materials from the UV to the IR. These glasses are prepared by fusion of the mixture of metal fulorides($ZrF_4$, $BaF_2$, $LaF_3$ etc) at 800-1, 00$0^{\circ}C$ under the inert$(N_2)$ or reactive ($CCl_4$, $Cl_2$) atmosphere following the casting into glass on cooling. Infrared absorption at the 3, 400 cm-1 -OH peak has been measured as a function of thickness for several ZrF-$BaF_2$-LaF and $HfF_4$-$BaF_2$-$LaF_3$ glasses to separate contributions from bulk and surface -OH. For glasses melted under $CCl_4$ reactive atmosphere the peak is due almost entirely to surface-OH. and melting in a closed reactor was best for removing -OH. In ambient atmosphere the -OH peak exhibited no time dependence over a 30 d period indicating a very small rate of surface attack by atmospheric H2O. Removal of -OH absorption processing was generally easier and more complete for the $BaF_2$/ThF4-glasses than for the $ZrF_4$-or $HfF_4$-based glasses.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.10
• /
• pp.1295-1301
• /
• 2009

This study was carried out to investigate the mutagenic, antimutagenic, cytotoxicity and antitumor effect of Codonopsis lanceolata (CL). CL was extracted with 70% ethanol and then further fractionated to hexane, chloroform, ethyl acetate, butanol and water. Antimutagenic, cytotoxicity and antitumor effects of CL extracts were measured by using Ames test, SRB method, and the tumor growth inhibition test. CL extracts did not show any mutagenicity in the Ames test; however, 70% ethanol extracts and its fractions had strong antimutagenic effects against mutation induced by N-methyl-N'-nitro-N-nitrosoguanidine (MNNG) and 4-nitroquinoline-1-oxide (4NQO). The ethyl acetate fraction of CL (200 ${\mu}g$/plate) showed approximately 72.1% inhibitory effect on the mutagenesis induced by 4NQO against TA98 strain, whereas 69.6% and 67.0% inhibitions were observed on the mutagenesis induced by MNNG and 4NQO against TA100 strain. In anticancer effects, the cytotoxicity of CL extract and its fractions against cancer cell lines including human cervical adenocarcinoma (HeLa), human hepatocellular carcinoma (HepG2), human breast adenocarcinoma (MCF-7), human lung carcinoma (A549) and transformed primary human embryo kidney (293) were investigated. The treatment of 1 mg/mL CL ethyl acetate fraction had the highest cytotoxicity of 74.5%, 70.7% and 80.3% against HeLa, MCF-7 and A549 cells, respectively. In contrast, the extract and its fractions showed only 2$\sim$31% cytotoxicity for a normal human kidney cell line (293). In vivo anticancer effect of CL extract was tested using Balb/c mice transplanted sarcoma-180 cells. CL ethyl acetate fraction showed the highest inhibition rate of 56.4% at the 50 mg/kg concentration.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.73-79
• /
• 1999

The superstructured $Li_{4/3}Ti_{5/3}O_4$ was prepared by sol-gel process using a mixed solution of lithium acetate (LA) and titanium n-butoxide (TNB). The gel phase was obtained by adding ammonia water ($NH_4OH/TNB$ mole ratio of 0.35) and water ($H_2O/TNH$ mole ratio of 3.5) into the clear sol that was prepared after mixing TNB/LA mole ratio of 5/4 with AA/TNB mole raio of 0.125. It was found that the most suitable $Li_{4/3}Ti_{5/3}O_4$ was obtained by heat treatment of xerogel at $600^{\circ}C$ for 30 hrs. The synthesized $Li_{4/3}Ti_{5/3}O_4$ showed an initial discharge capacity of 174 mAh/g and the capacity loss of about 27.3% during 25 cycles in Li/1M $LiClO_4(in\;PC)/Li_{4/3}Ti_{5/3}O_4$ at current density of $0.15mA/cm^2$ and the voltage range of 0.5~3.0 V.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.1
• /
• pp.119-125
• /
• 2006

The present study including two experiments was designed to determine the effect of media containing different rare earth elements (REE) on proliferation and fatty acids accumulation in 3T3-L1 cell cultures. In Experiment 1, 3T3-L1 preadipocytes in 96-well plates ($1.5{\times}10^4cells/ml$) were cultured with Dulbecco's modified Eagle's medium (DMEM) containing 10% fetal bovine serum (FBS) for 24 h. Then the media were changed to the following 10 different media for 48 h: DMEM containing 10% FBS for the control; the above media containing $5{\mu}M$, $10{\mu}M$ or $15{\mu}M$ of $LaCl_3$, $CeCl_3$ or the mixture of these REE chlorides. The proliferation rate of the cells was measured and compared by a non-isotope method-XTT method. In Experiment 2 the cells in 24-well plates ($1.5{\times}10^4cells/ml$) were cultured in DMEM containing 10% FBS for 7 days until confluent and then were changed to above DMEM containing dexamethasone, methyl-isobutylxanthine and insulin (DMI) for two days. Afterwards the media were changed to the 10 different media with REE supplements as in Experiment 1 and cultured for 6 days. The cells were then harvested for fatty acids analysis by gas chromatography. It was found that supplementation of La (5, 10 and $15{\mu}M$), Ce ($5{\mu}M$ and $15{\mu}M$) and the mixture REE (5, 10 and $15{\mu}M$) stimulated (p<0.05) the proliferation of 3T3-L1 preadipocytes (Experiment 1). In the differentiating 3T3-L1 cells supplementation of La ($5{\mu}M$ and $10{\mu}M$), Ce ($5{\mu}M$) and the mixture REE ($5{\mu}M$ and $15{\mu}M$) decreased (p<0.05) the concentration of monounsaturated fatty acids (MUFA) per $10^5cells$, while the supplementation of La ($5{\mu}M$), Ce ($5{\mu}M$) and the mixture REE ($15{\mu}M$) increased (p<0.05) the ratio of saturated fatty acids (SFA) to MUFA. These results indicate that the supplementation of REE to the media may affect proliferation, differentiation and lipogenesis rates of 3T3-L1 cells. However, the effect may depend upon the level or type of REE applied.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.930-935
• /
• 2004

$({Li}_{0.5}0{La}_{0.5}){TiO}_3$ (LLTO) solid electrolyte was grown on LiCo{O}_2 (LCO) cathode films deposited on $Pt/Ti{O}-2/Si{O}_2/Si$ substrate using pulsed laser deposition for all-solid-state lithium microbattery. LLTO solid electrolyte exhibits an amorphous phase at various deposition temperatures. LLTO films deposited at 10$0^{\circ}C$ showed a clear interrace without any chemical reaction with LCO, and showed an initial discharge capacity of 50 $\mu$Ah/cm$^2$-$\mu$m and capacity retention of 90 % after 100 cycles with Li anode in 1mol$ LiCl{O}_4$ in propylene carbonate (PC). The increase of capacity retention in LLTO/LCO structure than LCO itself was attributed to the structural stability of LCO cathode films by the stacked LLTO. The cells of LLTO/LCO with LLTO grown at $100^{\circ}C$ showed a good cyclic property of 63.6 % after 300 cycles. An amorphous LLTO solid electrolyte is possible for application to solid electrolyte for all-solid-state lithium microbattery.