• Food Science and Preservation
• /
• v.14 no.4
• /
• pp.394-399
• /
• 2007

In this study, the characteristic qualities of whole soymilk were examined based on differing hydrolysis condition. The results showed that as the concentration of enzyme preparation(KMF-G) increase, $^{\circ}Brix$, calcium-binding capacity, and the content of free amino acid components also increased. Additionally SDS-PAGE analysis revealed a similar pattern of in the molecular weight of proteins at enzyme preparation concentration 0.20 and 0.35%(w/w). The quality of whole soymilk hydrolysate was shown to be best at a enzyme preparation(KMF-G) concentration of 0.20%(w/w) and hydrolysis time of 60 min. When sterilized at 115, 130 and $145\;^{\circ}C$ for 15 sec each the change in whole soymilk quality was not substantial. Based on the above results, a 0.20%(w/w) enzyme preparation(KMF-G) concentration and 60 mim hydrolysis time was determined to be the optimal hydrolysis condition for whole soymilk. It is anticipated that soymilk hydrolysis will a food material that is diverse in its application and uses.

• Wind and Structures
• /
• v.26 no.5
• /
• pp.293-304
• /
• 2018

A numerical study is conducted on the flow characteristics of a rectangular cylinder (chord-to-width ratio C/W = 2 - 10) mounted close to a rigid wall at gap-to-width ratios G/W = 0.25 - 6.25. The effects of G/W and C/W on the Strouhal number, vortex structure, and time-mean drag and lift forces are examined. The results reveal that both G/W and C/W have strong influences on vortex structure, which significantly affects the forces on the cylinder. An increase in G/W leads to four different flow regimes, namely no vortex street flow (G/W < 0.75), single-row vortex street flow ($0.75{\leq}G/W{\leq}1.25$), inverted two-row vortex street flow ($1.25<G/W{\leq}2.5$), and two-row vortex street flow (G/W > 2.5). Both Strouhal number and time-mean drag are more sensitive to C/W than to G/W. For a given G/W, Strouhal number grows with C/W while time-mean drag decays with C/W, the growth and decay being large between C/W = 2 and 4. The time-mean drag is largest in the single-row vortex street regime, contributed by a large pressure on the front surface, regardless of C/W. A higher C/W, in general, leads to a higher time-mean lift. The maximum time-mean lift occurs for C/W = 10 at G/W = 0.75, while the minimum time-mean lift appears for C/W = 2 at the same G/W. The impact of C/W on the time-mean lift is more substantial in single-row vortex regime. The effect of G/W on the time-mean lift is larger at a larger C/W.

• Korean Journal of Agricultural Science
• /
• v.2 no.2
• /
• pp.445-450
• /
• 1975

These experiments were carried out to obtain useful yeast for Korean grape wine brewing. The 213 strains of yeasts were isolated from grapes sampled in Daejeon city and suburbs and then 3 strains among the isolated yeasts were selected as useful strains and identified. The results obtained as follows; 1. The 3 strains of W-49, W-50 and W-127 selected as useful yeasts were clarified to grape wine mash rapidly. 2. In the mashes clarified after storage of 45 days, the value of optical density of the case of W-50 strain was highest and the color was very thick, compared with the case of another strains. 3. In the pannel test of the grape wines, the case of W-49 and W-50 strains were best, the case of the W-127 strain and control yeast, Hb were similar each other as next order. 4. Among 3 strains selected as useful yeasts it were identified that the strains of W-49, W-50 selected as useful strains were Saccharomyces cerevisiae and the strain of W-127 was Saccharinyces pretoriencis by the Ladder manual. 5. All of these useful yeasts were appeared red color on TT C stain.

• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.563-568
• /
• 2006

The properties of mung bean were investigated depending on hydrolysis condition. The results showed that enzyme treatments (${\alpha}$-amylase and protease each at 0.1% (w/w)) by varying hydrolysis temperature showed better properties than non-pretense treatment (control group). The treatment with 0.08% ${\alpha}$-amylase was best for optimum hydrolysis of mung bean starch The treatment using a mixture of 0.08% (w/w) ${\alpha}$-amylase and 0.12% (w/w) protease was best for optimum hydrolysis of meg bean protein. The effects of Hydrolysis time of mung bean showed that the optimum time was 60 and 90 min and there fore the optimum time was set at 60 min. These result showed that the best hydrolysis conditions of mung bean were the treatment at $60^{\circ}C$ for 60 min using a mixture of 0.08%(w/w) ${\alpha}$-amylase and 0.12% (w/w) pretense, with the sugar level shown at $5.8^{\circ}Brix$, reducing sugar at 2,022.13 mg% and crude protein at 7,666.17 mg%.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.51-53
• /
• 2006

조명전력은 가정 및 사무실, 상업용 소비전력에서 많은 부분을 차지하면서 절전잠재량이 크므로 고효율 제품의 개발 및 보급의 필요성이 절실한 부문이다. 정부에서는 저 효율 제품인 40W직관형 형광램프(FL) 규제로 인하여 FPL55W램프, 안정기의 수요는 점점 증가하게 되었다. 그러나 아직 국내에서는 FPL55W램프, 안정기의 규제가 없는 실정이나 생산업체에서는 효율망상에 관심을 두고 FPL55W램프 대체용 FPL45W램프 및 안정기를 제작하고 보급하려한다. 본 논문에서는 이에 초점을 맞추어 FPL55W램프, 안정기 대체용 FPL45W램프, 안정기의 도입의 필요성을 알아보고 보급을 통한 경제성을 평가하려한다.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1054-1055
• /
• 2006

Bend tests were performed at temperatures between 77 and 473K for W-19vol%Cu, W-22vol%Ag and W-19vol%(BAg-8) composites. Yield and maximum strengths and ductility of the composite were discussed in terms of microstructure and fractography. Results are summarized as follows. (1) Almost no difference was recognized in yield strength between the composites. In contrast, a large difference was recognized in maximum strength and ductility between the composites. (2) Inferior mechanical properties of W-Ag composite to W-Cu composite are attributed to heterogeneous distribution of Ag-phases, whilst inferior mechanical properties of W-(BAg-8) composite to W-Cu composite are attributed to large pores at grain boundaries.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.01a
• /
• pp.101-102
• /
• 2018

본 논문에서는 교과개정 개편으로 저학년부터 코딩교육의 의무화가 됨에 따라 현시점에서 코딩교육의 대표적인 교육사이트에 대한 현황 및 장단점을 살펴보고, 교육을 받은 S/W 인재들이 대학교에 진학하여 배우는 S/W 교육에 대해 살펴보고자 했다. 현재 미래 창조과학부에서 운영하는 S/W 중심대학에 관하여 적절한 운영 방향에 따라 각 대학교가 운영되고 있는지 조사해보고 이에 따른 개선 방향을 제시하고자 하고 대학교별로 K-ICT(Korea-Information&Communication Techonology) 전략에 부합하는 목표성을 가졌는지 그룹핑해서 나열하고 이에 따른 문제점을 분석하여 S/W 교육 추진 방향과 정책설계를 통한 미래 발전 방안을 K-ICT 중심의 목표와 S/W 중심학교가 NCS(National Competency Standards)에 부합하는 시스템 개발을 위한 연구의 필요성을 제시한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.401-404
• /
• 2004

임베디드 시스템의 개발이 시장 적시성과 개발 생산성을 만족시키도록 개발 방법을 향상시키기 위해 제품 계열(Product Line) 기반의 개발 방법을 제시한다. 기존에 생성된 소프트웨어 컴포넌트를 재사용할 수 있는 컴포넌트 기반 시스템 개발 방법론을 제시하고 종합적이고 체계적인 형태의 재사용 프로세스를 구성하며 각 단계별로 필요한 작업과 제품 생산 원칙을 살펴보도록 한다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.5
• /
• pp.384-389
• /
• 2009

KEPRI (Korea Electric Power Research Institute) has studied planar type solid oxide fuel cell (SOFC) stacks using anode-supported cells and kW class co-generation systems for residential power generation. In this work, a 1 kW SOFC system consisted of a hot box part, a cold BOP (balance of plant) part, and a hot water reservoir. The hot box part contained a SOFC stack made up of 48 cells, a fuel reformer, a catalytic combustor, and heat exchangers. Thermal management and insulation system were especially designed for self-sustainable operation in that system. A cold BOP part was composed of blowers, pumps, a water trap, and system control units. When the 1 kW SOFC stack was tested using hydrogen at $750^{\circ}C$, the stack power was about $1.2\;kW_e$ at 30 A and $1.6\;kW_e$ at 50 A. Turning off an electric furnace, the SOFC system was operated using hydrogen and city gas without any external heat source. Under self-sustainable operation conditions, the stack power was about $1.3\;kW_e$ with hydrogen and $1.2\;kW_e$ with city gas respectively. The system also recuperated heat of about $1.1\;kW_{th}$ by making hot water.

• Journal of the Korean Ceramic Society
• /
• v.45 no.12
• /
• pp.772-776
• /
• 2008

The Korea Electric Power Research Institute (KEPRI) has been developing planar solid oxide fuel cells (SOFCs) and power systems for combined heat and power (CHP) units. The R&D work includes solid oxide fuel cell (SOFC) materials investigation, design and fabrication of single cells and stacks, and kW class SOFC CHP system development. Anode supported cells composed of Ni-YSZ/FL/YSZ/LSCF were enlarged up to $15{\times}15\;cm^2$ and stacks were manufactured using $10{\times}10\;cm^2$ cells and metallic interconnects such as ferritic stainless steel. The first-generation system had a 37-cell stack and an autothermal reformer for use with city gas. The system showed maximum stack power of about $1.3\;kW_{e,DC}$ and was able to recover heat of $0.57{\sim}1.2\;kW_{th}$ depending on loaded current by making hot water. The second-generation system was composed of an improved 48-cell stack and a prereformer (or steam reformer). The thermal management subsystem design including heat exchangers and insulators was also improved. The second-generation system was successfully operated without any external heat source. Under self-sustainable operation conditions, the stack power was about $1.3\;kW_{e,DC}$ with hydrogen and $1.2\;kW_{e,DC}$ with city. The system also recuperated heat of about $1.1\;kW_{th}$ by making hot water. Recently KEPRI manufactured a 2kW class SOFC stack and a system by scaling up the second-generation 1kW system and will develop a 5kW class CHP system by 2010.