• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.29-35
• /
• 1976

In order to estimate sawmill productivities, rates of technical change and optimum combination of production factors, Cobb-Douglas production functions have been derived using data obtained from 96 sample mills in Busan-Incheon, southwestern and northeastern areas. The results may be summarized as follows: 1. There is a tendency of expanding average sawmill size in the areas. The horse-power holdings per mill have been increased at the rates of 91 percent in Busan-Incheon, 7.7 percent in southwestern and 16.9 percent in northeastern areas. This implies that the mills around log-importing ports have made rapid development, compared with those in forest regions. 2. The regression coefficients (production elasticities) of the functions for the year of 1967 in the above three areas are much similar each other, but significant differencies are found in the production functions of 1975. In other words, sawmill productivity was mainly restricted by capital deficiencies in all areas in 1967, but this situation was succeeded only by N-E area in 1975. The range of sum of regression coefficients is 1.0437-1.4214, this indicates increasing rates of return to scale. 3. The annual rates of technical changes in B-I, S-W and N-E areas for the observed period are 17.6, 7.6 and 2.2 percents respectively. Busan-Incheon is the only area where labor productivity is higher than that of capital. 4. The best combination of production factors for maximizing firm's profit is subject to the changes of input and output prices. With some assumptions of prices and costs, the optimum levels of power and labor input in B-I, S-W and N-E areas are 57:17, 427:94 and 192:27.

• Proceedings of The Korean Society of Health Promotion Conference
• /
• 2004.10a
• /
• pp.1-16
• /
• 2004

This paper considers the possibilities of health promotion from the following perspectives; (1) IUHPE, (2) socio-cultural similarities, (3) action research, and (4) learning from our past. 1. The IUHPE values decentralized activities through regions, and countries such as Japan, Korea, Hong Kong, Taiwan and China belong to NPWP region. Since IUHPE World Conference was held in Japan in 1995, Japan used to occupy more than 60% of NPWP membership. After 2001, membership is increasing rapidly in Chinese speaking sub-region. The transnational collaboration is still in its beginning phase. 2. Confucianism is one of key points. Confucian tradition should not be seen only as obstacles but as advantages to seek a form of health promotion more acceptable in East Asia. 3. Within the new public health framework, people are expected to create and live their health. However, especially in Japan, the tendency of 'lacking of face-to-face explicit interactions' is still common at health-promotion settings as well as academic settings. Therefore, the author tried participatory approaches such as asking WlFY (interactive questions designed for subjects to review their daily life and environment) and as introducing round table interactions. So far, majority of participants welcome new trials. 4. The following social phenomena are comparatively discussed after Japanese invasion and occupation of Korea ended in 1945; ·status of oriental medicine, ·separation of dispensary services, and ·health promotion specialist as a national license. In contrast to Japanese' tendency of maintaining the status quo and postponing of substantial social change, trend toward rapid and dynamic social changes are more commonly observed in Korea. Although all of above possibilities are still in their beginning stages, they are going to offer interesting directions waiting for further challenges and accompanying researches.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.3
• /
• pp.125-146
• /
• 2013

Nowadays, the performance of the mobile game sales is influencing the ranking of game companies listed on KOSDAQ. In the meantime, venture capital companies had focused on online game. Recently, however, they have great interest in mobile games and mobile game companies. In addition, angel investors and accelerators are increasing investment for the mobile game companies. The most important issues for mobile game investor is how to evaluate the mobile game companies and their contents. Therefore, this study derived the evaluation factors for the mobile game company. And research method converged of the opinions of both supply side and demand side of the game industry. Ten professionals who are responsible for the supply of the game industry and CEO group & development experts of game development company were selected for survey in this study. Also ten professionals who are responsible for the demand of the game industry and the investment company were selected for survey in this study. And Delphi technique was performed according to the survey. Management skills, development capabilities, game play, feasibility, operational capabilities has emerged as five evaluation factors to evaluate the mobile game company. And the 20 sub-factors including CEO's reliability were derived. AHP(Analytic Hierarchy Process) theory is applied to analyze the importance of the qualitative elements which were derived by Delphi technique. As a result, the analysis hierarchy of evaluation factors for the mobile game company was created. Pair-wise comparison for each element was performed to analyze the importance. As a result, 'Core fun of the game' (12,2%), 'Involvement of the game' (10.3%), 'Security Reliability' (8.9%), 'Core developers' ability' (7.6%) appeared in order of importance. The significance of this study is offering more objective methodology for realistic assessment and importance of elements to evaluate mobile game company.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.147-161
• /
• 2011

Korea is surrounded by sea on three sides. This country has been supplied with a variety of aquaculture products cultivated on shores. There have recently been a lot of studies to have better understanding of the correct location and quantity of aquaculture farms for seaweed, ear shells and fish that cover a wide area of sea. And it is necessary to use the geographic information system and remote sensing to detect the aquaculture farms in order to effectively manage them. This study uses higher resolution aerial images(25 centimeters) than satellite images of 2~2.5-meter resolution that have been ever used, to conduct an accuracy detection of aquaculture farming facilities. It chooses as the case study area the Wando region that has aquaculture farms for seaweed, ear shells and fish. Aerial photos of the island were obtained in this study and an image correction of them was conducted. A spatial database was then constructed in this study and the detection of aquaculture farming facilities was performed. An analysis of facilities inside and outside the permitted areas reveals that there has been an increase in the facilities of seaweed and ear shell aquaculture farms outside the permitted areas. And also it tells that because the facilities of fish aquaculture farms have turned into those of ear shell aquaculture farms, there has been a decrease in permitted facilities, facilities detected on the basis of aerial images, and facilities outside the permitted area. It will be necessary to continuously control and manage the unpermitted facilities, regarding the increase in the facilities inside and outside the permitted area for seaweed and ear shell aquaculture farms. Because the facilities of aquaculture farms cover a wide range of areas(sea) in this manner, it is more effective to depend on high resolution aerial images than a field survey to detect and calculate the facilities. This study comes up with a plan for using aerial images to detect the location and the quantity of the fish aquaculture facilities and then effectively manage them.

• Korean Journal of Agricultural Science
• /
• v.2 no.1
• /
• pp.131-142
• /
• 1975

This study was carried out to define the variations of important quantitative characters and correlations among them accoding to the planted location under the shadow by planting density. The results obtained are summarized as follows; 1. Growth of leaf and stem of 6 rows and 8 rows planting plots was decreased at front and back rows, but that of root was increased at front row and also decreased at back row. However, at 4 rows planting plots, front row was better for the growth of leaf, stem and root. 2. Average root weight of 6 rows planting plot was 34.29g but that of 8 rows planting plot was ]8.20 g. And total weight of root per unit area was increased and quality of ginseng was better in 6 rows planting plot compaired with 8 rows. 3. Variation by planting locations under the shadow was smallest in stem diameter and highest in root length at 8 row planting plot, but at 6 rows planting plot, that was smallest in leaf blade and greatest in stem length. However, in 4 rows plant ing plot, variation of leaf length was smallest and that of root weight biggest. 4. In all Planting densities, root weight was significantly correlated with root diameter and high correlation was recognized between root diameter and stem diameter. 5. Rate of variations of all characters among plant individuals was different by planting location and that of correlations between quantitative Characters too.

• Korean Journal of Agricultural Science
• /
• v.2 no.1
• /
• pp.125-130
• /
• 1975

This investigation was carried out to define the cultivation state of Ginseng seedling and to study the growth of important characters by location and correlations between characters, the results obtained are summarized as follows; 1. Most of farmers culitvating ginseng seedling had not any special consideration for the improvement of soil, and they applied green manure only as basic fertilizer but they did not apply chemical fertilizer. 2. Any efforts on the improvement of ginseng seed were not found. Seed was harvested from 3 years old ginseng plant. Seedling density was 1.8 cm by 2 cm. 3. Growth of all characters showed significant differences among farms. Coefficients of variation among individual seedling plants was largest at root diameter and smallest at root length. 4. Gromth of all characters without root diameter by planted location under the shadow was poor at front row, however root diameter was shortest at back row. 5. Significant high correlatons were rocognized between root diameter and stem diameter, between leaf blade and stem diameter and between leaf blade and leaf length, but stem length were not correlated with any characters. It is noticable that negative correlations were found between stem length and root diameter, between stem length and root length and between stem length and stem diameter.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.5
• /
• pp.942-952
• /
• 1998

The aim of this study was to evaluate spontaneous and LPS stimulated proinflammatory cytokines and chemokine release of alveolar macrophages in the patients with pulmonary tuberculosis and healthy individuals, as a control. Alveolar macrophages recovered from bronchoalveolar lavage fluids were cultured with or without LPS 0.1, 1, or 10 ${\mu}g/ml$ for 24 and 48 hours in 37C, 5% CO2. TNF-$\alpha$, IL-1$\beta$, IL-6 and IL-8 amount were evaluated using ELISA kit from the supernatants. There were a significant increase in the spontaneous 24 hours release of TNF-$\alpha$ and IL-6 from the involved segments of tuberculosis patients compared with uninvolved segments and normal control There were also increasing trends of release of them after LPS stimulation in involved segments, but not significant. IL-1$\beta$ and IL-8 were not evaluated from the involved segments of tubeculosis and there were not significant differences of them between uninvolved segments of tuberculosis and normal control. It is concluded that cytokine release of alveolar macrophages in the pulmonary tuberculosis was markedly increased, and it was localized to the alveolar macrophages from the involved segments.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.51-59
• /
• 1994

This study was carried out to investigate the optimal propagation condition through stem node tissue culture of yam supplemented with concentration levels of growth regulators and activated charcoal in 1 /8MS white media. For shoot induction and plant regeneration from yam stem node tissue wre more effectivein combination of auxin, kinetin and activated charcoal than combination of auxin and kinetin. Shoot induction and plant regeneration were more effective in 1/8 medium suplemented with 1AA $2mg\;/\;\ell,\;kinetin\;2mg\;/\;\ell$ and activated charcoal $1g\;/\;\ell$ than in white medium, but in case of white medium, Shoot induction and plant regeneration wre effective in culture medium supplemented with NAAa $4mg\;/\;\ell,\;kinetin\;2mg\;/\;\ell$ and activated charcoal $1g\;/\;\ell$. Growth status in optimal propagation condition from yam stem node tissue brought the results of multiple plant, elongated plant height and increase in number of leaves and roots, but tissue culture effect by kinds of media in number of multiple plant were more effective in 1 /8MS medium than in white medium.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.1
• /
• pp.67-75
• /
• 1987

The major objectives of this study were to find out the growth and yield of two ecotypes of Korean garlic in main garlic producing districts in Korea. The data were collected by the field survey which had been conducted at 270 township in 58 major garlic production countries throughout the country on 10th, 20th, and 30th day of every month from 1982 to 1984. The results of this study were as follow: 1) Sowing period of garlic of southern and northern ecotype were around September 20 and October 20, respectively. 2) Average number of plants per $3.3m^2$ of the southern and northern ecotype were 123 and 100, respectively. 3) Leaf emergence time of southern ecotype was before the beginning of winter (November) and that of northern ecotype was from early February till April. 4) Stepwise multiple regression analysis showed that the plant heights measured on November 30 for southern ecotype and on June 30 for northern ecotype most adequately predicted the yield of garlic. The relationship between yield and plant height were as follows: Southern ecotype; Y=571.56+5.34X Northern ecotype; Y=251.81+5.45X where Y is yield expressed in Kg/l0a and X is height in cm at the respective date. 5) The number of leaves increased until harvest in both ecotypes. At harvest, the number of leaves in southern and northern ecotype were 10 and 8, respectively. Number of leaves counted on January 20 for southern ecotype and on June 20 for northern ecotype correlated best with the yield of the ecotypes. 6) The highest senescent portion of southern ecotype and northern ecotype were seen on January 30 and May 30, respectively. Stepwise multiple regression analysis showed that the senescent portion of southern ecotype counted on January 30 and that of northern ecotype on June 20 mostly affected the yield. 7) Average yield of southern and northern ecotype at the main garlic producing districts were 771 and 652Kg/10a, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.