• Korean Journal of Food Science and Technology
• /
• v.33 no.3
• /
• pp.282-287
• /
• 2001

This study was carried out to investigate the difference of ginsenoside compositions in crude ginseng saponins prepared by five different methods including three new methods. Two known methods are hot methanol(MeOH) extraction/n-butanol(n-BuOH) fractionation and hot MeOH extraction/Diaion HP-20 adsorption/MeOH elution. Three new methods are hot MeOH extraction/cation AG 50W $absorption/H_2O$ elution/n-BuOH extraction, cool MeOH extraction/Diaion HP-20 adsorption/MeOH elution and direct extraction with ethyl acetate(EtOAc)/n-BuOH. Analysis of ginsenoside composition in the crude saponins by conventional HPLC/RI(Refractive Index) did not show great difference between methods except EtOAc/n-BuOH method. However, HPLC/ELSD (evaporative light scattering detector) employing gradient mobile phase afforded fine resolution of ginsenoside Rf, $Rg_1$ and $Rh_1$, and great difference of ginsenoside compositions between methods. LC/MS revealed that large amount of prosapogenins were produced during the pass through the cation exchange (AG 50W) column being strongly acidic. Six major ginsenosides such as $Rb_1,w;Rb_2,$ Rc, Rd, Re and $Rg_1$, 5 prosapogenins and one chikusetsusaponin were identified by LC/MS. A newly established HPLC method employing ODS column and gradient mobile phase of $KH_2PO_4/CH_3CN$ revealed that malonyl ginsenosides were detected only in the crude saponin obtained from cool MeOH extraction.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.137-140
• /
• 2000

Marine microorganism strain 96CJ10356 produced exopolysaccharides, designated as EPS-R. To optimize culture conditions for the production of EPS-R, carbon, nitrogen, mineral salt, temperature, and pH were examined. STN medium was suggested as follow; sucrose 20, tryptone 10, NaCl 10, $MgSO_4$ 5, $CaCl_2$ 1, $KH_2PO_4$ 0.0076, $K_2HPO_4$ 0.0083, $FeCl_2$ 0.005, $MnCl_2$ 0.001, $NaMoO_4$ 0.001, $ZnCl_2$ 0.001 (g/1) and pH 7.0 About 9.23 g/l of EPS-R was obtained from the STN medium after cultivation for 120 h at $25^{\circ}C$ in 5-liter jar fermentor with an aeration rate of 0.17 vvm. Apparent viscosity and flocculation activity of the culture broth were increased with the production of the EPS-R and the maximal values were reached to 415 cp and 1400 units/ml against 0.5 % activated carbon, respectively.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.1
• /
• pp.64-69
• /
• 1999

The effect of phytohormones, light and phosphate on in vitro production of ubiquinone 10 from the suspension cultures of Nicotiana tabacum cv. Xanthi callus was investigated. The inoculum size and cultured time in the suspension culture had to be at least over 2 % of medium volume at 15 days for the excellent growth of Xanthi callus. The growth of Xanthi callus in the suspension culture was improved by addition of NAA and 2,4-D, especially NAA 1.0mg/1 alone, at the light condition. The optimal concentration of phytohormone was 0.1 mg/l 2.4-D and 1.0 mg/l NAA for productivity of ubiquinone 10 in the suspenseion of Xanthi callus. Addition of 3mM KH$_2$PO$_4$ to the medium was more effective in promoting ubiquinone-l0 formation than other concentration in the light condition. Content and production of ubiquinone-l0 in the suspension cultures of Xanthi callus were the highest at the MS media containing 0.5mg/L kinetin, 0.5mg/L 2,4-D, 1.0mg/1 NAA, 3mM phosphate and 2 % inoculum in the light.

• Microbiology and Biotechnology Letters
• /
• v.23 no.3
• /
• pp.263-268
• /
• 1995

A screening was performed to isolate exoploysaccharide-producing microorganisms, which synthesized specific exopolysaccharide for the substitutive of commercial polysaccharides, from natural sources. Soil bacterium, one of 378 mucoid isolates, was finally selected as potential producer of polysaccharides which made the culture broth very viscous and thus examined in detail for optimal medium composition. Isolated strain was identified as Xanthomonas sp. EPS- 1 from the results of morphological and biochemical characteristics. The composition of optimal medium for exopolysaccharide production was as follows: 50 g sucrose, 1.5 g peptone, 2 g KH$_{2}$PO$_{4}$, 2 g MgSO$_{4}$, -7H$_{2}$O, 3 g NaCl, 0.05 g CaCO$_{3}$, 0.07 g FeSO$_{4}$-7H$_{2}$O and 0.05 g MnSO$_{4}$-7H$_{2}$O in 1 liter of distilled water. From the experiments of temperature and pH dependence, the optimal conditions for exopolysaccharide biosynthesis seemed to be 30$\circ$C and 8.0, respectively. About 14.9 gram of maximum exopolysaccharide per liter was obtained at the initial pH 8.0, 30$\circ$C and 250 rpm in a flask culture. The exopolysaccharide EPS-1 had such potential as an emulsifying agent and a gelling agent in comparision with commercial exopolysaccharide.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.18-25
• /
• 2005

Characteristics of phenanthrene removal in an electrokinetic (EK)-Fenton process were investigated in a viewpoint of concentration and ionic strength of electrolytes. When three kinds of electrolytes (NaCl, $KH_2PO_4,\;and\;MgSO_4$) were used, the increase in electrolyte concentration caused the decrease of electrical potential gradient. The increase of electrical conductivity was due to the increase of ionic concentration in soil. The decrease of accumulated electroosmotic flow (EOF) with increase in electrolyte concentration was due to the decrease of zeta potential. The removal efficiency was in proportion to accumulated EOF which depended on ionic strength. Total energy expenditure without electrolyte was 10-30 times higher than its with 0.5 M electrolyte. The lower removal efficiency was caused by the lower energy expenditure with 0.5 M one. An effective EK-Fenton process was determined from considering the removal efficiency and the energy expenditure, simultaneously.

• Journal of Environmental Health Sciences
• /
• v.21 no.4
• /
• pp.49-55
• /
• 1995

Dyes are released into the environment as industrial wasterwater. Dyes are considered to be a pollution problem because of the wide spread into environment with a variety of colors. Continuous biodegradation of reactive dyes such as Rifacion Red H-3EB, Rifazol Blue BT, Rifacion Yellow P4G and Rifacion Brown RT were demonstrated using multistage rotating disc contactor immobilized by Aspergillus sojae B-10. Aspergillus sojae B-10 was cultivated the optimal medium containing 2.0% glucose, 0.08% $NaNO_3$, 0.1% $KH_2PO_4$ and 0.5% $MgSO_4\cdot 7H_2O$, pH 5 at 32$\circ$C. Mycelium of Aspergillus sojae B-10 were guck to the rotating disc for 10 days until steady state. For continuous biodegradation of reactive dyes by using rotating disc contactor, it was most effective biodegradation in the medium containing 1,000 ppm each dyes at the medium feeding rate of 20 ml per hour. Under the conditions biodegradation of each dyes on 2, 4 and 6 days were 20~50%, 75% and 96%, respectively. Therefore, practical application of reactive dyes were carried out at the feeding rate of 20 ml/h as synthetic wasterwater containing 500 ppm of mixture reactive dyes. It was found the highest levels of 94% biodegradation during 20 days.

• Microbiology and Biotechnology Letters
• /
• v.24 no.5
• /
• pp.560-566
• /
• 1996

A strain capable of producing thermostable chitinase suitable for chitooligosaccharide production was isolated from high temperature environment and identified as Bacillus licheniformis. The chitinase from Bacillus licheniformis KFB-Cl4 was only induced by addition of colloidal thitin into the basal medium as carbon source, showing the decrease of the chitinase production by supplernental addition of other carbon sources into the medium containing 1.0% colloidal chitin. Among organic and inorganic nitrogen sources, yeast extract was the most effective for the increase of total activity and specific activity, and had high affinity for the enzyme production. The optimum temperature of cell growth and thermostable chitinase production was 55$\circ$C. The optimum culture medium was composed of 1.2% colloidal chitin, 0.15% K$_{2}$HPO$_{4}$, 0.05% KH$_{2}$PO$_{4}$, 0.01% MgSO$_{4}$-7H$_{2}$O, 0.1% yeast extract (pH 6.5). Bacillus licheniformis KFB-C14 produced the thermostable chitinase of 3.89 units per ml culture fluid and 7.4 units per mg protein under rotary shaking at 150 rpm for 40 hr.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.327-333
• /
• 2000

This experiment was conducted to determine the effect of priming duration and temperature on germinability of vegetable seeds. Priming chemicals were -0.50 MPa PEG 8000 for carrot, 50 mM $K_3PO_4$ for lettuce, 200 mM $KH_2PO_4$ for onion, and 100 mM $Ca(NO_3)_2$ for Welsh onion seeds. Priming temperature varied from $10^{\circ}C$ to $25^{\circ}C$, and priming duration varied from 12 hours to 5 days depending on crops. Percent germination of carrot seeds was significantly affected by the seed treatment and priming temperature. Priming at $20^{\circ}C$ for 3 days was most effective in reducing number of days to attain 50% of the final germination percentage (T50) and mean number of days to germination (MDG). Radicle protrusion in the priming solution was as high as 14% when primed at $20^{\circ}C$ for 4 days. Percent germination of lettuce seeds was affected significantly by the seed treatment and priming duration. Priming lettuce seeds at $20^{\circ}C$ for 2 days increased percent germination and shortened T50 and MDG without radicle protrusion. Percent germination of onion seeds was affected significantly by the seed treatment, priming duration, and temperature. Priming at either $10^{\circ}C$ or $15^{\circ}C$ for 3, 4, or 5 days did not affect percent germination of onion seeds, but was effective in reducing T50 and MDG. Decline in percent germination of onion seeds was precipitous as the length of priming duration increased from 3 to 5 days. Percent germination of welsh onion seeds was not affected by the priming duration and temperature. Priming at $15^{\circ}C$ for 4 days was most effective in reducing T50 and MDG, increased in duration of priming at $15^{\circ}C$ or $20^{\circ}C$ increased radicle protrusion.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.201-204
• /
• 2004

Immobilization is seen as a promising technology for lead remediation. In a laboratory experiment, immobilization of lead with soluble P was tested as a function of reaction time and P concentration. The P treated with an acidic solution to enhance heavy metal immobilization was worked into the soil, and within 7 days, lead was stabilized. Different molar ratios of soluble phosphates (super-phosphate and KH$_2$PO$_4$) would be considerably effective to accelerate the formation of highly insoluble minerals due to the lack of leachable Pb in the contaminated soil. Although it was demonstrated that the addition of soluble phosphates with an acidic solution significantly reduced available lead in soil up to over 95%, remaining phosphorus in soil matrix might cause a possible groundwater eutrophication in the near future.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.395-398
• /
• 2002

Bioremediation has been showing promise as an alternative to conventional environmental cleanup technologies. The objective of this study is to maximize the degradability of jet fuel in the soil system. The cells isolated from petroleum contaminated site was used for the degradation of jet fuel. When this strain was cultured in the MSM(minimal salt media) containing jet fuel for ten days, the degradability of jet fuel was almost 100%. The concentration of jet fuel did not affect the degradability much and the increased inoculution of strain and addition of nitrogen source decreased the time for complete degradation of jet fuel in the liquid culture. Inoculation of this strain increased the jet fuel degradability in the soil column by 15% and the aeration(50ml/min) and the addition of nutrients($NaNO_3$, $KH_2PO_4$) enhanced the jet fuel degradability(about 90%).