• Asian Journal of Atmospheric Environment
• /
• v.2 no.2
• /
• pp.75-80
• /
• 2008

A new-type apparatus decomposing volatile organic compounds (VOCs) using a combination system of an electrical exothermic SiC honeycomb and a catalytic filter was developed. This linear combination system is very useful to the catalytic decomposition of VOCs, because the gas involving VOCs is well heated in the SiC honeycomb and then flows into the catalytic filter. In the proposed apparatus, the outlet gas temperatures of SiC honeycomb maintained at ca. $300^{\circ}C$ after 5 min from the starting of applying electric current, and sufficient for the catalytic degradation of VOC components, i.e. toluene, isopropanol, methyl ethyl ketone and ethyl acetate. The average decomposition rate of total VOCs exhausted from a printing factory was 85% using pt catalyst at SV=19,000 in this system.

• Mycobiology
• /
• v.34 no.2
• /
• pp.73-78
• /
• 2006

Inter-specific hybridization between Pleurotus pulmonarius and P. florida was attempted through PEG-induced protoplast fusion to select a fusant. The protocol for protoplast release, regeneration and fusion in these two Pleurotus species was standardized using the variables controlling the process. The mixture of mycolytic enzymes, i.e. commercial cellulase, crude chitinase and pectinase, KCl (0.6 M) as osmotic stabilizer, pH 6 of the phosphate buffer and an incubation time of 3 hours resulted in the maximum release of protoplasts from 3-day-old mycelia of P. florida ($5.3{\sim}5.75{\times}10^{7}$ protoplasts/g) and P. pulmonarius ($5.6{\sim}6{\times}10^{7}$ protoplasts/g). The isolated protoplasts of P. florida regenerated mycelium with 3.3% regeneration efficiency while P. pulmonarius showed 4.1% efficiency of regeneration. Polyethyleneglycol (PEG)-induced fusion of protoplasts of these two species resulted in 0.28% fusion frequency. The fusant produced fruiting bodies on paddy straw but required a lower temperature of crop running ($24{\pm}2^{\circ}C$) than its parents which could fruit at $28{\pm}2^{\circ}C$. The stable fusant strain was selected by testing for the selected biochemical markers i.e. Carbendazim tolerance and utilization of the lignin degradation product, vanillin.

• Journal of the Korean Ceramic Society
• /
• v.45 no.1
• /
• pp.43-47
• /
• 2008

The photocatalyst of $TiO_2$ coated on a fly ash composites (TCF) was prepared from precipitant dropping method to remove the acetaldehyde by photocatalytic reaction. The TCF were characterized by crystal aize, crystal structure and specific surface area. The photodegradation of acetaldehyde has been investigated using a UV-illuminated fixed photocatalytic reactor with TCF catalyst and P-25 catalyst in gas phase. The effect of photodegradation reaction conditions, such as initial concentration of acetaldehyde, concentration of oxidant in mixed gas and the light intensity on the photodegradation of acetaldehyde were investigated. P-25 catalyst showed the highest photodegradation of acetaldehyde and anatase $TiO_2$ coated TCF showed higher decomposition rate than rutile coated TCF. The photodegradation rate of acetaldehyde increased with the decrease of flow rate, initial concentration of acetaldehyde ($C_i$) and water vapor, however, it was increased with the increas of UV light intensity. The optimum conditions were weight of TCF=10 g, flow rate=50 ml/min $C_i$=100 ppm, concentration of oxygen=20%, concentration of water vapor=100 ppm.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.1
• /
• pp.13-17
• /
• 2022

The mechanical properties of REBCO coated conductor (CC) tapes under uniaxial tension are mainly determined by the thick layer Components like the substrate and the stabilizer. Depending on the applications of the CC tapes, it is also needed to externally reinforce thin metallic foils to one side or both sides of the CC tapes. This study investigated the effect of additional stabilizer layers or lamination on the electrical resistivity and electromechanical properties in RCE-DR processed GdBCO CC tapes with different structures. The strain/stress tolerance of I_c in differently processed 12 mm-wide REBCO CC tapes under uniaxial tension at 77 K and self-field could be determined by the loading-unloading scheme. As a result, Sn-Cu stabilized CC tape showed a significant decrease in mechanical properties due to its soft but thick stabilizing layer. However, similar electromechanical properties have been observed on both Sn-Cu and Sn-stabilized CC tapes, the I_c degradation behavior was independent of whether the CC tape has an external reinforcement or different stabilizing layers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.3
• /
• pp.405-411
• /
• 1994

Purified myofibrils were prepared from ante-mortem stress and control lots of Taiwan country chicken breast and thigh muscles at death and afler storage at $4^{\circ}C$ for 0, 1, 2, 3, and 7 days post-mortem. Sodium dodecyl sulfate polycrylamide gel electrophoresis (3.2%) and densitometer were used to examine the effect of ante-mortem stress and control storage of muscle on titin and nebulin. Results indicated that titin and nebulin were more rapidly degraded in the control and the ante-mortem stress light muscles than in the control and ante-mortem dark muscles of Taiwan country chicken. In contrast, nebulin was shown to be more resistance to degradation in the ante-mortem stress dark muscle than in the control light muscle.

• Biomolecules & Therapeutics
• /
• v.2 no.4
• /
• pp.310-315
• /
• 1994

The pharmacokinetics and tissue distribution of DA-3030 (recombinant human granulocyte colony-stimulating factor, rhG-CSF, recently manufactured by Dong-A research laboratory of Dong-A Pharmaceutical Company) were compared with reported data in the literature. After intravenous(i.v.) administration of DA-3030, at dose of 5, 10 and 100 $\mu\textrm{g}$/kg to rats, some pharmacokinetic parameters, such as terminal half-lives(1.05, 1.19 and 1.83 hr, respectively) and clearance (84.0, 54.8 and 45.5 mι/hr/kg, repectively), were dose-dependent. This could be due to the saturable metabolism of DA-3030 in rats. Similar results were also reported. After subcutaneous(s.c.) and intramuscular(i.m.) administrations of DA-3030, 10 $\mu\textrm{g}$/kg to rats, the extent of bioavailability(absolute bioavailability) were incomplete; the values were 23.3 and 18.2% after s.c. and i.m. injections, respectively, due to the degradation of DA-3030 by protease. After 7-consecutive day i.v. administrations of DA-3030, 10 $\mu\textrm{g}$/kg/day, to rats, the plasma concentrations and pharmacokinetic parameters of DA-3030 were not significantly different from those in single administration. In mice and dogs at DA-3030 dose of 10 $\mu\textrm{g}$/kg, the plasma concentrations of DA-3030 were also declined rapidly with terminal half-lives of 1.31 and 1.15 hr, respectively. DA-3030 was highly concentrated in the kidney after i.v. administration of DA-3030, 10 $\mu\textrm{g}$/kg, to rats, and the results were similar to those obtained using radiolabelled rhG-CSF in the literature. Above data indicate that DA-3030 has similar properties to rhG-CSF manufactured by other companies in view of pharmacokinetics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.05a
• /
• pp.9-9
• /
• 2009

Coated conductor is required to have good critical current property for high efficiency of electric power applications. Until now, long coated conductor does not show high Jc over 3 MA/$cm^2$ in thick superconducting layer because of texture degradation by thick superconducting layer. In this study, in order to overcome this issue, thicker superconducting layer was deposited with optimized conditions to reduce the degradation of critical current density. SmBCO superconducting coated conductor was deposited with 1~3 um of thickness at $750\sim850^{\circ}C$ under 15~20 mTorr of oxygen partial pressure using batch type EDDC( evaporation using drum in dual chamber). The buffered substrate for superconducting layer deposition was used IBAD-MgO template with the architecture of $LaMnO_3/MgO/Y_2O_3/Al_2O_3$/Hastelloy. After fabrication of coated conductor, critical current was measured by 4-prove method under self-magnetic field and 77K. In addition, surface morphology and texture were analyzed by SEM and XRD, respectively. 3 um thick SmBCO coated conductor shows highest $I_C$ values of 638A/cm-w in 1 m long in the world.

• Corrosion Science and Technology
• /
• v.8 no.5
• /
• pp.203-207
• /
• 2009

Electrochemical methods have been widely used to study the performances and mechanisms for the degradation of organic and inorganic coatings. In this study, EN(Electrochemical noise) measurement was applied to the protective properties and review the parameters analyzed noise signals in the time and in the frequency domain for epoxy resin based coated steels during exposure to hot sea water($40^{\circ}C$) and salt spray for 200 days. It was also found that $R_n$(Noise resistance), $R_{sn}$($f_{min}$)(Spectral noise resistance) and 2H(Hurst exponent) represented the performance of epoxy coated steels. $R_n$ can be determined as the ratio of the standard deviations of potential and current noise signals and is decreased to exposure time. Data qualities can be easily checked by PSD(Power Spectral Density) plot and $V_{psd}$, $I_{psd}$ and $R_{sn}$($f_{min}$) is useful to research the protective performances and mechanisms of coated steels. Hurst exponent represents the degradation of coated steels. But, it is difficult to directly apply the protective criterion to the evaluation of epoxy coated steels used the shipbuilding processes.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.366-372
• /
• 2020

Since, side effects of antibiotics are frequently emphasized these days, their use is gradually diminishing, and alternative drugs are being developed. We have sought to reintroduce them as raw materials for human health as conventional 'weapons' that have been retired after their historical duties. In this study, we investigated the anti-inflammatory effects of lincomycin (LIN), on lipopolysaccharide (LPS)-stimulated RAW 264.7 cells. Our findings show that LIN potently inhibited production of LPS-induced proinflammatory mediators, such as nitric oxide (NO) and prostaglandin E₂ (PGE₂), without cytotoxicity. Consistent with these findings, LIN strongly decreased protein expression levels of inducible NO synthase (iNOS) and cyclooxygenase (COX-2). Furthermore, LIN reduced pro-inflammatory cytokines such as tumor necrosis factor (TNF)-α, interleukin (IL)-6, and IL-1β. To further elucidate the mechanisms of these inhibitory effects of LIN, we studied LPS-induced IκB-α degradation, and mitogen-activated protein kinase (MAPK) phosphorylation. LIN suppressed downregulation of inhibitory κB (IκB-α) degradation, and the phosphorylation of the c-Jun N-terminal kinase (JNK) pathway. Based on these results, we suggest that LIN may be considered a potential candidate as an anti-inflammatory cosmetic or a medicine for human health.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.178-183
• /
• 1995

Piezoelectric properties of sintered specimen having a tetragonal phase of $Pb_{0.9888}Sr_{0.012}(Zr_{0.52}Ti_{0.48})O_{3}$ were comparatively studied with two different poling methodes, i.e., DC field and corona discharge technique. Internal stress of poled specimens by indentation fracture toughness was analyzed to evaluate degradation phenomenon. As the results, it was confirmed that corona discharge poling technique is practicable and has merits such as low-temperature poling, slow degradation and no electric breakdown comparing to DC field poling. However, corona discharge technique showed lower Kp value than DC field poling.