• Title/Summary/Keyword: $HoMnO_3$

검색결과 310건 처리시간 0.028초

PLD를 이용한 HoMn1-x-FexO3 박막 제조 및 후방 산란형 뫼스바우어 분광 연구 (Characterization and Conversion Electron Mössbauer Spectroscopy of HoMn1-x-FexO3 Thin Films by Pulsed Laser Deposition)

  • 최동혁;심인보;김철성
    • 한국자기학회지
    • /
    • 제17권1호
    • /
    • pp.18-21
    • /
    • 2007
  • Pulsed laser deposition(PLD) 박막 증착법을 이용하여 hexagonal $HoMn_{1-x}-Fe_xO_3$(x=0.0, 0.05) 물질을 박막으로 $Pt/Ti/SiO_2/Si$ 기판 위에 증착하였다. 또한 x-ray diffraction(XRD), atomic force microscopy(AFM), scanning electron microscope(SEM), 및 x-ray photoelectron spectroscopy(XPS)를 통하여 박막의 결정학적 및 미세 구조를 분석하였고, conversion electron $M\"{o}ssbauer$ spectroscopy(CEMS)를 이용하여 자기적 특성에 관해 연구하였다. 결정구조는 hexagonal 구조로써 space group이 $P6_3cm$로 분석되었고, single crystal과는 달리 (110) 방향으로 우선 배향성을 가지고 증착되었다. $HoMn_{0.95}Fe_{0.05}O_3$ 박막의 경우 single crystal과 비교했을 때 hexagonal unit cell의 $c_0$ 축은 일정하나 $a_0$ 축은 다소 감소함으로 분석되었다. 이는 박막 증착에 사용된 $Pt/Ti/SiO_2/Si$ 기판과의 lattice mismatch 때문으로 해석된다. Fe가 미량 치환된 $HoMn_{0.95}Fe_{0.05}O_3$ 박막을 상온에서 CEMS 측정을 수행한 결과, $HoMn_{0.95}^{57}Fe_{0.05}O_3$ 분말의 경우 magnetic $T_N$이 72K 부근이므로, 상온에서 doublet absorption spectrum이 관측되었고, 전기사중극자 분열값(quadrupole splitting; ${\Delta}E_Q$)이 $1.62{\pm}0.01mm/s$로 비교적 큰 값을 가짐을 확인하였다.

Ni-Mn 산화물 NTC 서미스터의 미세구조와 전기적 특성에 미치는 ZrO2첨가의 효과 (Effect of ZrO2 Addition on the Microstructure and Electrical Properties of Ni-Mn Oxide NTC Thermistors)

  • 박경순;방대영;윤성진;최병현
    • 한국세라믹학회지
    • /
    • 제40권1호
    • /
    • pp.11-17
    • /
    • 2003
  • Ni-Mn 산화물 NTC 서미스터의 미세구조와 전기적 특성에 미치는 Zr $O_2$ 첨가의 효과를 연구하였다. Zr $O_2$를 포함하는 Ni-Mn-Zr 산화물 소결체의 주요 상은 입방정 스피넬 구조를 가지는 NiO-Mn$_3$ $O_4$-Zr $O_2$의 고용체와 정방정 결정구조를 가지는 Zr $O_2$ 상이였다. Zr $O_2$의 첨가량이 증가함에 따라 Ni-Mn-Zr산화물의 고용체를 형성하지 못하고 생성된 Zr $O_2$의 양이 증가하였다. NiO-Mn$_3$ $O_4$-Zr $O_2$ NTC 서미스터에 있어서 절대온도 역수(l/T)에 대한 로그 비저항(log $ho$)은 직선적인 관계가 있었고, 비저항, B$_{140}$320/정수 및 활성화 에너지는 Zr $O_2$ 함량이 증가함에 따라 크게 증가하였다.

Sb/Bi비에 따른 5원계 바리스터의 소결거동 및 전기적 특성(I) : ZnO-Bi2O3-Sb2O3-Mn3O4-Cr2O3 (Sintering and Electrical Properties According to Sb/Bi Ratio(I) : ZnO-Bi2O3-Sb2O3-Mn3O4-Cr2O3 Varistor)

  • 홍연우;이영진;김세기;김진호
    • 한국재료학회지
    • /
    • 제22권12호
    • /
    • pp.675-681
    • /
    • 2012
  • We aimed to examine the co-doping effects of 1/6 mol% $Mn_3O_4$ and 1/4 mol% $Cr_2O_3$ (Mn:Cr = 1:1) on the reaction, microstructure, and electrical properties, such as the bulk defects and grain boundary properties, of ZnO-$Bi_2O_3-Sb_2O_3$ (ZBS; Sb/Bi = 0.5, 1.0, and 2.0) varistors. The sintering and electrical properties of Mn,Cr-doped ZBS, ZBS(MnCr) varistors were controlled using the Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$), ${\alpha}$-spinel ($Zn_7Sb_2O_{12}$), and ${\delta}-Bi_2O_3$ (also ${\beta}-Bi_2O_3$ at Sb/Bi ${\leq}$ 1.0) were detected for all of the systems. Mn and Cr are involved in the development of each phase. Pyrochlore was decomposed and promoted densification at lower temperature on heating in Sb/Bi = 1.0 system by Mn rather than Cr doping. A more homogeneous microstructure was obtained in all systems affected by ${\alpha}$-spinel. In ZBS(MnCr), the varistor characteristics were improved dramatically (non-linear coefficient, ${\alpha}$ = 40~78), and seemed to form ${V_o}^{\cdot}$(0.33 eV) as a dominant defect. From impedance and modulus spectroscopy, the grain boundaries can be seen to have divided into two types, i.e. one is tentatively assigned to ZnO/$Bi_2O_3$ (Mn,Cr)/ZnO (0.64~1.1 eV) and the other is assigned to the ZnO/ZnO (1.0~1.3 eV) homojunction.

변태 이산화망간의 분석 화학적 연구 (제3보) 시차 열곡선에 의한 Pyrolusite의 정량 (The Study of Analytical Chemistry of the Modification of Manganese Dioxide (III). Quntitative Determination of Pyrolusite by Differential Heating Curves)

  • 김찬호
    • 대한화학회지
    • /
    • 제17권2호
    • /
    • pp.122-125
    • /
    • 1973
  • 시차열곡선에서 Pyrolusite $({\beta}-MnO_2)$의 결정 전이의 흡열 Peak를 이용하여 분석 화학적인 재현성을 검토한 결과 Pyrolusite의 량이 50mg∼450mg까지는 정량적이었다. ${\alpha}-MnO_2$는 흡열 Peak가 중첩되어 파의 분리가 불가능하였으며, ${\gamma}-MnO_2$(전해이산화망간)와 ${\delta}-MnO_2$는 오차 범위 ${\pm}5{\%}{\sim}{\pm}10{\%}$이내에서 조제시료중 Pyrolusite만을 정량할 수 있다.

  • PDF

$Y_2O_3$$MnO_2$를 첨가한 $SrBi_2Nb_2O_9$ 세라믹스의 강유전 특성 (Ferroelectric properties of $Y_2O_3$ and $MnO_2$ doped $SrBi_2Nb_2O_9$ ceramics)

  • 석종민;이용현;노종호;조정호;전명표;김병익;고태경
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.346-347
    • /
    • 2006
  • 기계적 품질계수(Qm)를 향상시키기 위해 $Y_2O_3$$MnO_2$를 첨가함에 따른 $SrBi_2Nb_2O_9$ 세라믹스의 강유전 특성을 알아보았다. 합성분말의 입도를 분석 한 결과 $SrBi_2Nb_2O_9$의 경우 781.27nm였고, $Y_2O_3$$MnO_2$를 첨가한 경우 각 각 830.4nm와 981.1nm로 particle size는 증가하였고, 소결 후 소결밀도는 차이가 거의 없었으며, grain size는 $SrBi_2Nb_2O_9$$Y_2O_3$를 첨가했을 경우 $1{\mu}m$이하이며 반면, $MnO_2$를 첨가하였을 때 결정립이 성장하여 $3{\sim}4{\mu}m$로 나타났다. 또한, 모두가 $450^{\circ}C$ 이상의 상전이온도를 갖았다.

  • PDF