• 대한화학회지
• /
• 제38권4호
• /
• pp.276-282
• /
• 1994

Citrate sol-gel법을 이용하여 perovskite형 복합산화물 LaBO$_3$(B = Mn, Fe, Co)을 공기 중 $850^{\circ}C$에서 24시간 동안 소성하여 제조하였다. X-선 회절분석(XRD)과 TPR결과에 의하면 이들 산화물의 결정구조와 산소화학양론은 LaMnO$_{3.16}$(a = 5.507, c = 13.329 $\AA$, hexagonal), LaFeO$_{3.17}$(a = 5.554, b = 5.555, c = 7.863 $\AA$, orthorhomibic), LaCoO$_{3.0}$(a = 5.436, c = 13.095 $\AA$, hexagonal)으로 수소 분위기(300torr)에서의 TPR결과에 의하면 이들 산화물은 2단계 환원반응으로 반응이 진행되며, 열적안정성은 LaMnO$_3$ > LaFeO$_3$ > LaCoO$_3$순으로 나타났고, 반응속도론적 결과 역시 LaCoO$_3$의 활성화에너지 값이 가장 낮음을 보였다.

• 한국분말재료학회지
• /
• 제25권3호
• /
• pp.203-207
• /
• 2018

Plastic pollution is threatening human health and ecosystems, resulting in one of the biggest challenges that humanity has ever faced. Therefore, this study focuses on the preparation of macroporous carbon from biowaste (MC)-supported manganese oxide ($MnO_2$) as an efficient, reusable, and robust catalyst for the recycling of poly(ethylene terephthalate) (PET) waste. As-prepared $MnO_2/MC$ composites have a hierarchical pore network and a large surface area ($376.16m^2/g$) with a narrow size distribution. $MnO_2/MC$ shows a maximum yield (98%) of bis(2-hydroxyethyl)terephthalate (BHET) after glycolysis reaction for 120 min. Furthermore, $MnO_2/MC$ can be reused at least nine times with a negligible decrease in BHET yield. Based on this remarkable catalytic performance, we expect that $MnO_2$-based heterogeneous catalysts have the potential to be introduced into the PET recycling industry.

• Corrosion Science and Technology
• /
• 제21권1호
• /
• pp.53-61
• /
• 2022

Alloys of Fe-(5.3-29.8)%Mn-(1.1-1.9)%Al-(0.4-0.5)%C were oxidized at 550 ℃ to 650 ℃ for 20 h to understand effects of alloying elements on oxidation. Their oxidation resistance increased with increasing Mn level to a small extent. Their oxidation kinetics changed from parabolic to linear when Mn content was decreased and temperature was increasing. Oxide scales primarily consisted of Fe₂O₃, Mn₂O₃, and MnFe₂O₄ without any protective Al-bearing oxides. During oxidation, Fe, Mn, and a lesser amount of Al diffused outward, while oxygen diffused inward to form internal oxides. Both oxide scales and internal oxides consisted of Fe, Mn, and a small amount of Al. The oxidation of Mn and carbon transformed γ-matrix to α-matrix in the subscale. The oxidation led to the formation of relatively thick oxide scales due to inherently inferior oxidation resistance of alloys and the formation of voids and cracks due to evaporation of manganese, decarburization, and outward diffusion of cations across oxides.

• 한국세라믹학회지
• /
• 제39권9호
• /
• pp.829-834
• /
• 2002

$Er(NO_3)_3{\codt}5H_2O,\;Mn(CH_3CO_2)_2{\cdot}4H_2O$를 출발원료로 사용하여 졸-겔 법으로 Si(100) 기판 위에 코팅된 $ErMnO_3$ 박막의 강유전 특성에 관하여 연구하였다. $ErMnO_3$ 박막은 800$^{\circ}C$에서 결정화가 시작되었으며, (001)로 우선 배향된 $ErMnO_3$ 박막을 얻을 수 있었다. 본 실험에서 800$^{\circ}C$에서 1 h 열처리하여 얻은 $ErMnO_3$ 박막은 1∼100 KHz의 주파수 범위에서 유전 상수(k)는 26, 유전 손실(tan ${\delta}$)은 0.032의 값을 나타내었으며, 이때 $ErMnO_3$ 박막의 입자 크기는 10∼30 nm이었다. 강유전 특성은 (001) 배향성이 증가할수록 잔류 분극 값이 증가하였으며, 800$^{\circ}C$에서 1시간 열처리하여 $ErMnO_3$ 박막의 잔류 분극 값($P_r$)은 400 nC/$cm^2$를 나타내었다. 또한 열처리 시간이 증가할수록 치밀하고 균일한 박막을 얻어 낮은 항전계 ($E_c$) 값을 가졌다.

• 한국진공학회지
• /
• 제17권2호
• /
• pp.130-137
• /
• 2008

$La_{0.7}Sr_{0.3}MnO_3$ 박막을 rf 마그네트론 스퍼터를 이용하여 챔버 내 산소가스유량비를 0, 40, 80 sccm 으로 조절하고 후열처리 공정 없이 기판온도를 $350^{\circ}C$로 유지하면서 $SiO_2$/Si(100) 및 Si(100) 기판에 증착하였다. 증착된 $La_{0.7}Sr_{0.3}MnO_3$ 박막은 $SiO_2$/Si(100), Si(100) 기판 모두 (100), (110), (200)면을 갖는 polycrystalline 상태였으며, oxygen flow rate이 증가함에 따라 박막의 grain size가 증가하였다. 증가되는 grain size로 인하여 grain boundary가 감소하였고 따라서 높은 oxygen flow rate에서 증착된 박막은 면저항이 감소하는 현상을 나타내었다. $SiO_2$/Si 기판과 Si 기판에 증착된 LSMO 박막의 TCR 값은 약 -2.0 $\sim$ -2.2%를 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제25권7호
• /
• pp.506-510
• /
• 2012

In this study, lead-free $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ ceramics were fabricated by conventional mixed oxide method. Structural and electrical properties of lead-free $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ ceramics with the variation of sintering temperature were investigated. As results of x-ray diffraction analysis, all specimens showed a typical polycrystalline perovskite structure without presence of the second phase. Sintered density increased with an increases of sintering temperature and the specimen sintered at $1,020^{\circ}C$ showed the maximum value of 4.5 $g/cm^3$. The average grain size of the $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ specimen sintered at $1,020^{\circ}C$ is about 0.83 ${\mu}m$. Electromechanical coupling factor, relative dielectric constant and dielectric loss of $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ specimens sintered at $1,020^{\circ}C$ were 0.252, 741 and 0.043% respectively.

• 한국전기전자재료학회논문지
• /
• 제23권4호
• /
• pp.303-310
• /
• 2010

We fabricated $La_{0.6}Sr_{0.4}MnO_3$ thin films using radio frequency (RF) magnetron sputtering. They were grown on sapphire substrates with various deposition conditions. After the growth of the $La_{0.6}Sr_{0.4}MnO_3$ thin films, they were annealed at various temperatures to be crystallized. We successfully fabricated single phase $La_{0.6}Sr_{0.4}MnO_3$ thin films with high electrical conductivity. The room temperature resistivity was $1.5{\times}10^{-2}{\Omega}{\cdot}cm$. It can be considered that $La_{0.6}Sr_{0.4}MnO_3$ thin films are one of the feasible candidates for electrodes for integrated device applications.

• 한국가스학회지
• /
• 제4권2호
• /
• pp.27-32
• /
• 2000

본 연구는 염화망간과 수산화나트륨을 이용하여 당량비에 따라 산화망간을 합성하였다. 합성된 산화망간의 결정구조와 비표면적을 측정하였으며, 이산화탄소의 분해 및 흡착에 대하여 연구하였다. 합성된 시료의 결정구조 분석결과 $Mn_3O_4$의 주피크가 나타났으며, 약간의 $MnO_2$와 $Mn_5O_8$도 관찰되었다. 또한 비표면적은 $13.92m^2/g{\~}32.33m^2/g$으로 측정되었다. 산화망간을 이용하여 $450^{\circ}C$에서 이산화탄소의 분해를 실시하였으며, 당량비 0.75에서 가장 잘 분해되었다. 이산화탄소의 화학흡착량을 측정한 결과 2.885cc/g${\~}$19.628cc/g으로 관찰되었으며, 이산화탄소의 흡착을 위한 최적당량비는 1.00이었다.

• Bulletin of the Korean Chemical Society
• /
• 제15권12호
• /
• pp.1058-1064
• /
• 1994

Mn/In$_2O_3$ systems with a variety of Mn mol${\%}$ were prepared to investigate the effect of Mn-addition on the catalytic activity of Mn/In$_2O_3$ in the oxidative coupling of methane. The oxidative coupling of methane was examined on pure In$_2O_3$ and Mn/In$_2O_3$ catalysts by cofeeding gaseous methane and oxygen under atmospheric pressure between 650 and 830 $^{\circ}C$. Although pure In$_2O_3$ showed no C$_2$ selectivity, both the C$_2$ yield and the C$_2$ selectivity were increased by Mn-doping. The 5.1 mol${\%}$ Mn-doped In$_2O_3$ catalyst showed the best C$_2$ yield of 2.6${\%}$ with a selectivity of 19.1${\%}$. The electrical conductivities of pure and Mn-doped In$_2O_3$ systems were measured in the temperature range of 25 to 100 $^{\circ}C$ at PO$_2$'S of 1 ${\times}$ 10$^{-7}$ to 1 ${\times}$ 10 $^{-1}$ atm. The electrical conductivities were decreased with increasing Mn mol${\%}$ and PO$_2$, indicating the specimens to be n-type semiconductors. Electrons serve as the carriers and manganese can act as an electron acceptor in the specimens. Manganese ions doped in In$_2O_3$ inhibit the ionization of neutral interstitial indium or the transfer of lattice indium to interstitial sites and increase the formation of oxygen vacancy, giving rise to the increase of the concentration of active oxygen ion on the surface. It is suggested that the active oxygen species adsorbed on oxygen vacancies are responsible for the activation of methane.

• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1056-1060
• /
• 2004

In this study, 0.96B $i_{0.5}$($Na_{0.84}$ $K_{0.16}$)$_{0.5}$Ti $O_3$ + 0.04SrTi $O_3$ + 0.3 wt% N $b_2$ $O_{5}$+0.2 wt% L $a_2$ $O_3$ + xwt % Mn $O_2$ were investigated as a function of the amount of Mn $O_2$ addition in order to improve dielectric and piezoelectric properties of Lead-free piezoelectric ceramics. With increasing the amount of Mn $O_2$ addition, the density, electromechanical coupling factor( $k_{p}$), piezoelectric constant( $d_{33}$, $g_{33}$) and curie temperature (Tc) showed the maximum value of 5.7 g/㎤, 38 %, 219 pC/N, 26 mVㆍm/N and 32$0^{\circ}C$ at 0.1 wt% Mn $O_2$ addition, respectively, and mechanical quality factor( $Q_{m}$ ) showed the maximum value of 158 at 0.3 wt% Mn $O_2$ addition.ddition.ion.n.