• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.286-287
• /
• 2012

Reset-first resistive switching mechanism based on reduction reaction in HfO2-x with oxygen drift-diffusion was studied. we first report that the indirect evidence of local filamentary conductive path formation in bulk HfO2 film with local TiOx region at Ti top electrode formed during forming process and presence of anion-migration at interface between electrode and HfO2 during resistive switching through high resolution transmission electron microscopy (HRTEM), electron disperse x-ray (EDX), and electron energy loss spectroscopy (EELS) mapping. Based on forming process mechanism, we expected that redox reaction from Ti/HfO2 to TiOx/HfO2-x was responsible for an increase of initial current with increasing the post-annealing process. First-reset resistive switching in above $350^{\circ}C$ annealed Ti/HfO2 film was exhibited and the redox phenomenon from Ti/HfO2 to TiOx/HfO2-x was observed with high angle annular dark field (HAADF) - scanning transmission electron microscopy (STEM), EDX and x-ray photoelectron spectroscopy. Therefore, we demonstrated that the migration of oxygen ions at interface region under external electrical bias contributed to bipolar resistive switching behavior.

• Journal of the Korean Vacuum Society
• /
• v.22 no.5
• /
• pp.245-249
• /
• 2013

The $HfO_X$ thin film was deposited what it has been paid attention to the next generation oxide thin layer of MOSFET (metal-Oxide semiconductor field-effect-transistor) by rf magnetron sputter on Si (100) substrate. The $HfO_X$ thin film was deposited using a various oxygen gas flows (5, 10, 15 sccm). After deposition, $HfO_X$ thin films were annealed from 400 to $800^{\circ}C$ for 20 min in nitrogen ambient. The electrical characteristics of the $HfO_X$ thin film was improved by leakage current properties, depending on the increase of oxygen gas flow and annealing temperature. In particular, the properties of nano-mechanics of $HfO_X$ thin films were measured by AFM and Nano-indenter. From the results, the maximum indentation depth at the basis of maximum indentation force was increased from 24.9 to 38.8 nm according to increase the annealing temperature. Especially, the indentation depth was increased rapidly at $800^{\circ}C$. The rapid increasement of indentation depth was expected to be due to the change of residual stress in the $HfO_X$ thin film, and this result was caused by relative flux of oxygen outgasing during the annealing process.

• Journal of Powder Materials
• /
• v.18 no.6
• /
• pp.568-574
• /
• 2011

As operating temperatures of engines or turbines continually increase for higher efficiency, significant amounts of researches have been focused on finding new materials, which would be alternatives to conventional yttria-stabilized zirconia (YSZ) for thermal barrier coatings (TBCs). In this study, phase evolution and thermo-physical properties of $La_2(Zr_{1-x}Hf_x)_2O_7$ pyrochlore systems are investigated for TBC applications. $La_2(Zr_{1-x}Hf_x)_2O_7$ systems are comprised by selecting $La^{3+}$ as A-site ions and $Zr^{4+}/Hf^{4+}$ as B-site ions in $A_2B_2O_7$ pyrochlore structures. For the developed phases in $La_2(Zr_{1-x}Hf_x)_2O_7$ compositions, thermo-physical properties such as thermal conductivity, thermal expansion coefficient are examined. The potential of these $La_2(Zr_{1-x}Hf_x)_2O_7$ compositions for TBC application is also discussed.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.42-44
• /
• 2003

최근 logic 소자의 gate oxide로 기존의 $SiO_2$, SiON보다 고유전, 작은 누설전류를 가지는 물질의 개발이 중요한 이슈가 되고 있다. 본 실험실에서는 Si 기판위에 $HfO_2$ 를 바로 증착하는 경우, 기판의 Si 이박막내로 확산하여 유전율이 저하되는 문제점을 인식하고, 기판과 $HfO_2$ 사이에 $AlO_x$를 방지막으로 사용하였다. 이 때, $AlO_x$의 Al precursor 는 TMA 로 고정하고, 산화제로는 $H_2O, O_2$-plasma, O_3$ 를 각각 사용하였다. 모든 $AlO_x/HfO_y$ 박막에서 매우 우수한 누설전류특성을 얻을 수 있었는데, 특히 $O_3$ 를 산화제로 사용한 $AlO_x$ 방지막의 경우 가장 우수한 특성을 보였다. 또한 질소 분위기에서 $800^{\circ}C$ 10 분간 열처리한 후, 방지막을 사용한 모든 경우에서 보다 향상된 열적 안정성을 관찰할 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.11-14
• /
• 2003

[ $HfO_2$ ] thin films were deposited at $300^{\circ}C$ on p-type Si (100) substrates using $HfO_2(HfO_xN_y)$ as the precursor by plasma-enhanced chemical vapor deposition and were annealed at $300^{\circ}C$ in nitrogen plasma ambient. Compared with $HfO_2$, nitrogen plasma annealed $HfO_2$ show good chemical stability, higher crystallization temperature, lower leakage current and thermal stability. Leakage current density of nitrogen plasma annealed $HfO_2$ is approximately one order of magnitude lower than that of $HfO_2$ for the same EOT. The improvement in electrical characteristics of nitrogen plasma annealed $HfO_2$ can be explained by the better thermal stability due to nitrogen incorporation.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.34.2-34.2
• /
• 2003

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.162-162
• /
• 2012

Sub 100 nm의 Complementary Metal-Oxide-Semiconductor (CMOS) 소자를 구동하기 위해서는 2.0 nm 이하의 $SiO_2$ oxide에 해당하는 전기적 특성이 요구된다. 그러나 2.0 nm 이하의 $SiO_2$에서는 누설 전류가 너무 크기 때문에 이를 대체하기 위해서 유전 상수 (dielectric permittivity)가 높은 $HfO_2$ (${\varepsilon}=25$), $Al_2O_3$, $HfO_2/Al_2O_3$ laminate 등의 high-k dielectric 물질들이 연구되고 있다[1]. High-k dielectric 물질의 전기적 특성은 박막 조성, 두께 및 전극과의 계면에 생성되는 계면 층이나 불순물(Impurity) 거동에 크게 의존하므로 High-k dielectric/전극(Metal or Si) 구조에서 조성 및 불순물의 거동에 대한 정확한 평가가 주요 쟁점으로 부각되고 있다. 이를 평가하기 위해 일반적으로 $Ar^+$ ion에 의한 depth profiling 분석이 진행되나 Oxygen 원자의 선택적 식각에 기인된 분석 깊이 분해능(Depth Resolution) 왜곡으로 계면 층의 형성이나 불순물의 거동을 정확하게 평가할 수 없다. 이러한 예로는 $Ta_2O_5$ 및 $SrBi_2Ta_2O_9$와 같은 다 성분 계 산화막에 $Ar^+$ ion 주사 시 발생하는 선택적인 식각(Preferential Sputtering) 때문에 박막의 실제 조성 및 거동을 평가하는 것은 어렵다고 보고된 바 있다[2,3]. 본 연구에서는 $90{\AA}$인 적층 $Hf_xO_y/Al_xO_y/Hf_xO_y$ 구조에서의 불순물 거동 분석 능력 확보 상 주요 인자인 깊이 분해능 개선을 Secondary Ion Mass Spectroscopy(SIMS)의 primary ion 종, impact energy 및 주사 각도를 변화시켜 ~1 nm 수준까지 구현하였다. 이러한 분석 깊이 분해능의 개선은 Low Impact Energy, 입사 이온의 glancing angle 및 Cluster ion 적용에 의존하며 이들 요인의 효과에 대해 비교/고찰하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.304.2-304.2
• /
• 2016

Hafnium oxide-aluminum oxide (HfO2-Al2O3) dielectric films have been fabricated by Pulsed Laser Deposition (PLD), and their properties are studied in comparison with HfO2 films. As a gate dielectric of the TFT, in spite of its high dielectric constant, HfO2 has a small energy band gap and microcrystalline structure with rough surface characteristics. When fabricated by the device, it has the drawback of generating a high leakage current. In this study, the HfAlO films was obtained by Pulsed Laser Deposition with HfO2-Al2O3 target(chemical composition of (HfO2)86wt%(Al2O3)14wt%). The characteristics of the thin Film have been investigated by x-ray diffraction (XRD), atomic force microscopy (AFM) and spectroscopic ellipsometer (SE) analyses. The X-ray diffraction studies confirmed that the HfAlO has amorphous structure. The RMS value can be compared to the surface roughness via AFM analysis, it showed HfAlO thin Film has more lower properties than HfO2. The energy band gap (Eg) deduced by spectroscopic ellipsometer was increased. HfAlO films was expected to improved the interface quality between channel and gate insulator. Apply to an oxide thin Film Transistors, HfAlO may help improve the properties of device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.5
• /
• pp.370-373
• /
• 2011

We investigated the effects of low temperature ($500^{\circ}C$) $O_2$ annealing on the characteristics of hafnium silicate ($HfSi_xO_y$) films deposited on a Si substrate by atomic layer deposition (ALD). We found that the post deposition annealing under oxidizing ambient causes the oxidation of residual Hf metal components, resulting in the improvement of electrical characteristics such as flat band voltage shift (${\Delta}V_{fb}$) by hysteresis without oxide capacitance reduction. We suggest that post deposition annealing under oxidizing ambient is necessary to improve the electrical characteristics of $HfSi_xO_y$ films deposited by ALD.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.145-146
• /
• 2002

Metal-Oxide-Semiconductor Field Effect Transistor(MOSFET)의 게이트 유전체로서 실리콘 산화막($SiO_2$)은 두께가 1.5nm 이하로 낮아질 경우 터널링 전류가 증가하여 누설 전류가 증가하게 된다. 이로 인해 사용 전력이 증가하게 되고, 소자의 성능을 떨어뜨리게 된다. 본 논문은 높은 유전상수와 넓은 에너지 밴드 갭을 갖는 $HfO_2$를 RF Magnetron Sputter를 이용하여 증착한 다음 RTA 열처리를 통하여 HfSixOy를 생성하여 전기적 특성을 측정하였다. 실험결과, 열처리 시간이 증가함에 따라 HfSixOy의 분포가 균일해지는 반면 두께가 얇아져서 누설 전류가 증가 하는 것으로 관찰되었다. $HfO_2$를 게이트 유전막으로 증착하였을 경우 $HfO_2/HfSixOy/Si$의 이중 박막 구조가 생겨 유전상수를 떨어뜨리는 반면, 실리콘 기판과 우수한 계면 특성을 갖는 HfSixOy만을 증착할 경우 양질의 단층 게이트 유전막으로 활용가능 할 것으로 사료된다.