• Carbon letters
• /
• v.10 no.2
• /
• pp.114-122
• /
• 2009

Crushed, depitted peach stones were impregnated activated with 50% $H_3PO_4$ followed by pyrolysis at $500^{\circ}C$. Two activated carbons were produced, one under its own evolved gases during pyrolysis, and the second conducted with air flow throughout the carbonization stage. Physicochemical properties were investigated by several procedures; carbon yield, ash content, elemental chemical analysis, TG/DTG and FTIR spectra. Porosity characteristics were determined by the conventional $N_2$ adsorption at 77 K, and data analyzed to get the major texture parameters of surface area and pore volume. Highly developed activated carbons were obtained, essentially microporous, with slight effect of air on the porous structure. Oxygen was observed to be markedly incorporated in the carbon matrix during the air treatment process. Cation exchange capacity towards Cu (II) and Cd (II) was tested in batch single ion experimental mode, which proved to be slow and a function of carbon dose, time and initial ion concentration. Copper was up taken more favorably than cadmium, under same conditions, and adsorption of both cations was remarkably enhanced as a consequence of the air treatment procedure. Sequestration of the metal ions was explained on basis of the combined effect of the oxygen functional groups and the phosphorous-containing compounds; both contributing to the total surface acidity character.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.3
• /
• pp.422-430
• /
• 2014

Pasture-based automatic milking systems (AMS) require cow traffic to enable cows to be milked. The interval between milkings can be manipulated by strategically allocating pasture. The current experiment investigated the effect of replacing an allocation of grazed pasture with grazed soybean (Glycine max) with the hypothesis that incorporating soybean would increase voluntary cow traffic and milk production. One hundred and eighty mixed age, primiparous and multiparous Holstein-Friesian/Illawarra cows were randomly assigned to two treatment groups (n = 90/group) with a $2{\times}2$ Latin square design. Each group was either offered treatments of kikuyu grass (Pennisetum clandestinum Hoach ex Chiov.) pasture (pasture) or soybean from 0900 h to 1500 h during the experimental period which consisted of 2 periods of 3 days following 5 days of training and adaptation in each period with groups crossing over treatments after the first period. The number of cows trafficking to each treatment was similar together with milk yield (mean ${\approx}18$ L/cow/d) in this experiment. For the cows that arrived at soybean or pasture there were significant differences in their behaviour and consequently the number of cows exiting each treatment paddock. There was greater cow traffic (more cows and sooner) exiting pasture allocations. Cows that arrived at soybean stayed on the allocation for 25% more time and ate more forage (8.5 kg/cow/d/allocation) relative to pasture (4.7 kg/cow/d/allocation). Pasture cows predominantly replaced eating time with rumination. These findings suggest that replacing pasture with alternative grazeable forages provides no additional incentive to increase voluntary cow traffic to an allocation of feed in AMS. This work highlights the opportunity to increase forage intakes in AMS through the incorporation of alternative forages.

• Korean Journal of Food Science and Technology
• /
• v.7 no.2
• /
• pp.96-99
• /
• 1975

In order to establish an optimal flour milling method for naked barley, the tempering conditions, milling after pearling and mixed flour milling of naked barley with wheat were studied, and the following results were obtained. 1. For the tempering of naked barley, treatment for 48 hours at a moisture level of 13. 5% and addition of 0. 5% water prior to the flour milling is the most useful procedure. 2. The pearling of naked barley before or after tempering lowers the ash content in the flour, but the yield is reduced considerably and two steps of processing make the procedure unsuitable. 3. For the mixed flour milling, the mixing ratio of naked barley to wheat ranging from 10 : 90 to 20 : 80 is optimal.

• Microbiology and Biotechnology Letters
• /
• v.51 no.3
• /
• pp.257-267
• /
• 2023

The potential polyhydroxyalkanoates (PHA)-producing bacteria, Bacillus megaterium PP-10, was successfully isolated and studied its feasibility for utilization of pineapple peel waste (PPW) as a cheap carbon substrate. The PPW was pretreated with 1% (v/v) H₂SO₄ under steam sterilization and about 26.4 g/l of total reducing sugar (TRS) in pineapple peel hydrolysate (PPH) was generated and main fermentable sugars were glucose and fructose. A maximum cell growth and PHA concentration of 3.63 ± 0.07 g/l and 1.98 ± 0.09 g/l (about 54.58 ± 2.39%DCW) were received in only 12 h when grown in PPH. Interestingly, PHA productivity and biomass yield (Y_x/s) in PPH was about 4 times and 1.5 times higher than in glucose. To achieve the highest DCW and PHA production, the optimal culture conditions e.g. carbon to nitrogen ratios of 40 mole/mole, incubation temperature at 35℃ and shaking speed of 200 rpm were performed and a maximum DCW up to 4.24 ± 0.04 g/l and PHA concentration of 2.68 ± 0.02 g/l (61% DCW) were obtained. The produced PHA was further examined its monomer composition and found to contain only 3-hydroxybutyrate (3HB). This finding corresponded with the presence of class IV PHA synthase gene. Finally, certain thermal properties of the produced PHA i.e. the melting temperature (T_m) and the glass transition temperature (T_g) were about 176℃ and -4℃, respectively whereas the M_w was about 1.07 KDa ; therefore, the newly isolated B. megaterium PP-10 is a promising bacterial candidate for the efficient conversion of low-cost PPH to PHA.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.259-264
• /
• 1999

A field experiment was carried out to determine the optimum application level of dicamba herbicide for efficient control of Calystegia japonica in silage corn field. Six treatments of application levels (0 ; control, $0.75{\ell},\;1.0{\ell},\;1.25{\ell},\;1.5{\ell},\;and\;2.0{\ell}/ha$) were arranged at National Livestock Research Institute, RDA, Suwon in 1995. The hybrid silage corn was DK 729, and dicamba herbicide was applied at 5~6 leaf stage of corn. The growth of corn was poor in control plot, and the days for tasseling and silking were delayed 1~4 days when compared with the plots of herbicide application. The control efficiency of Calystegia japonica was excellent as 74.3~94.6% in the plots of dicamba application. A slight injury of herbicide was observed at early stage of corn when applied at $1.25{\ell}$ and $1.5{\ell}$ of dicamba per ha, and severe injury was found at $2.0{\ell}$ of dicamba. Forage dry matter(DM) yield, and length of ear in the plots of dicamba treatments were significantly higher than those of control. The DM yield of control(4,866kg/ha) was only about 30% of dicamba treatment plot (14,960~16,340kg/ha). However, there was no yield difference among dicamba application level. The percentage of ear to total DM yield was ranged from 33.6 to 39.4%. With application of herbicide, the contents of crude protein and nitrogen free extract were increased, and that of crude fiber was decreased in stover. However, nutritive value of corn ear was very similar among all treatments, regardless of herbicide treatment. From the above results, it is recommended that optimum application level of dicamba herbicide was $0.75{\sim}1.0{\ell}/ha$ for efficient control of Calystegia japonica and for silage corn production without herbicide injury.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.3
• /
• pp.115-122
• /
• 2001

The purpose of this study was to suggest the possibility of utilizing the wildflower pasture as the livestock herbage sources as well as promoting the public interests. Not only dry matter (DM) yield and soil properties of pastures were observed, but also chemical composition of herbages was analyzed. The experimental design includes four treatments: Conventional pasture(COP, forage 6 species), Bottomgrass pasture(BOP, turf grass 6 species), Native wildflower pasture(NWP, turf grass 6 species + native wildflower 11 species) and Introduced wildflower pasture(IWP, turf grass 6 species + introduced wildflower 9 species). The field trials were carried out on the experimental pasture plots at Chungnam National University throughout from 1997 to 2000. The results obtained are as follows : 1. As wildflower pasture was composed of turf grasses and wildflowers, the yearly mean of DM yield in the wildflower pastures (NWP 6,688kg/ha and IWP 7,240kg/ha) was lower than that of COP(8,592kg/ha) or BOP(7,264kg/ha)(p<0.05). This result indicated that the forage productivity of wildflower pasture for livestock is low. 2. The nutritive quality of herbages from wildflower pasture tended to be slightly low compared to that of COP and BOP. On the other hand, compared with IWP, the content of CP, NDF and lignin of herbages from NWP were lower than those from IWP, while IVDMD was higher(p<0.05). 3. The pH and the content of exchangeable Ca in NWP and IWP soils were tended to be low compared to those of COP in changes of soil properties after 3-years experimental trials, while the contents of organic matter, nitrogen, available phosphate, Mg and K were slightly improved. In conclusion, even though DM yield seem to be lower in wildflower pasture than those of COP, and the nutritive quality of herbages from wildflower pasture tended to be slightly low compared to that of COP and BOP. but, possibility of utilizing herbages from wildflower pasture for livestock was to some extent expected. In addition. compared to COP, wildflower pastures improved the property of soil. Thus, although wildflower pasture was not enough for livestock as a herbage, wildflower pasture has enough possibility for promoting the public interest.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.144-147
• /
• 2006

This experiment was carried out to investigate the effect of mulberry fruit extinct on the acid production and growth of lactic acid bacteria. The extract of mulberry fruit was showed a high level of yield with 60% ethanol extraction. Lactic acid bacteria was used in a starter culture of Lactobacillus casei YIT9018 and 2782, and Lactobacillus acidophilus NCFM. After 24 hr culture in MRS broth added with 1.0, 5.0 and 10% of the extract 1.0% addition of the extract was showed pH $4.04{\sim}4.19$, titratable acidity $1.25{\sim}1.42%,\;and\;1.2{\sim}7.8{\times}10^9\;cfu/mL$ of viable cell count. The additions above 1.0% extract (5.0% and 10.0% addition) showed slightly lower effect than 1.0% addition. However, the addition of the extract showed a high effect on the growth of lactic acid bacteria comparing with the control. In yoghurt preparation with the extract, 1% addition of the extract showed a high effect on the growth of lactic acid bacteria, Therefore, it was suggested to manufacture of the yoghurt with the addition of 1% mulberry fruit extract and the inoculation of culture of Lactobacillus acidophilus for on the stimulation of growth of the lactic culture.

• Korean journal of applied entomology
• /
• v.10 no.2
• /
• pp.91-95
• /
• 1971

Four species of Trichoderma causing green mildew of Agaricus bisporus were isolated from 38spots of mushroom growing areas in Korea. These are T. koningi, T. lignorum, T. glaucum and an unidentified species, and their frequencies of occurrence are $50\%,\; 32\%,\; 13\%; and\; 5\%$ respectively. All of these species grew well in potato dextrose, Waksman's and Richard's solution, and preferred acid (pH. 4) to neutral. The temperature in mushroom trouse should be kept at $15^{\circ}C$ during cropping period, not only for the high yield of mushroom but also for the prevention of green mildew of mushroom caused by Trichoderma spp . T. lignorum was killed in soil on an exposure of 60 minutes at $70^{\circ}C$ and when exposed for 30minutes at $80^{\circ}C$. Peak heat procedure of compost eliminated T. lignorum and T koningi.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.451-456
• /
• 2004

The effects of variation in composition of the medium on the conversion of Gluconacetobacter hanseii PJK cells producing cellulose ($Cel^+$) to non-cellulose producing ($Cel^-$) mutants and the production of bacterial cellulose (BC) in an agitated culture were investigated. The impeller speed greater than 500 rpm was required to decrease the population of $Cel^-$ mutants to minimum in a basal medium containing $1.5\%$ ethanol because the optimum impeller speed to minimize the population of $Cel^-$ mutants increased with the concentration of ethanol added to a basal medium. Ethanol fed-batch culture could not increase the BC production in an agitated culture unlike that of a shaking culture. The amount of BC produced in a basal medium containing $1\%$ ethanol was $39\%$ more than that of the same medium with $0.27\%\;Na_{2}HPO_4$. Increase in the concentration of acetic acid in a basal medium decreased the BC production. The pH control of the culture broth increased the cell mass in the batch culture and improved the production yield of water-soluble polysaccharide (WSPS), but did not affect the production of BC.