• 한국초지조사료학회지
• /
• 제16권2호
• /
• pp.93-104
• /
• 1996

A field experiment was conducted in Chungju and Jungwon to evaluate growth characteristics, dry matter yield, protein yield and palatability of intercropping comparing with monocropping forage crops by the use of sorghum $\times$ sudangrass hybrid(S.S.H.), five forage soybeans and two forage cowpeas of superior to selected experiment of varieties. All eight treatment plots were replicated three times and cutting date were cut July 6 and September 9. 1. The mean leaf number of S.S.H. in intercropping T2 treatment showed high compared to T1 treatment in all treatment except for Hwangkeum treatment, but T3 treatment was lower than the other treatments. In the leaf number of soybean, Jangbaek treatment was the highest as 47 leaves per plant, cowpea treatments showed high above 50 leaves. The stem diameter of S.S.H. in Jangyeob treatment of T2 treatment was 9.6mm. In legume, cowpea of T3 treatment was high as ranged from 7.9mm to 8.2mm. In stem hardiness of S.S.H., TI treatment was the lower than the other treatments, while Jangbaek treatment of T2 treatment was the highest as $2.0kg/cm^2$. In legume crops, Jangbaek and Baekun treatment were the highest as $1.6kg/cm^2$, but T3 treatment was very low as $0.3~0.6kg/cm^2$. 2. In the mean leaf ratio of S.S.H., T1 treatment was higher than T2 and T3 treatment as 34.9%. In the legume crops, Togyu treatment was the highest as 40.9%. In the mean tiller number of S.S.H., T2 treatment showed high compared to TI treatment, but T3 treatment of was rather decrease than The tiller number of S.S.H. in Jangyeob treatment of T2 treatment was the highest as 4.6 per plant. The dead stubble of S.S.H. was high in order to T3>T1>T2 treatment>, T3 treatment was highly about 2 times compared to T2 treatment. 3. S.S.H. as T3 treatment was resistant to lodging, but T3 and T1 treatment showed highly lodging. In the legums, T3 treatment was resistant to lodging, but T2 treatment showed highly lodging. In the S.S.H. of T2 treatment, the leaf of summer depression was not occurrence, but T3 treatment was higher than the other treatments. 4. The palatability of domestic animals was high in order of T2>Tl>T3, especially Togyu treatment of T2 treatment was the highest at the holstein and deer, and Jangyeob treatment of T2 treatment was the highest in the Korean native cattle. But T3 treatment was lower than other treatments in the holstein and Korean native cattle. 5. Fresh yield of monocropping(T1) was the highest as 94, 650kg/ha, while dry matter yield in Jangyeob treatment of T2 treatment was the highest as 15, 575/ha But fresh yield and dry matter yield of T3 treatment were the lowest(P<0.05). 6. Protein yield in T2 treatment was high, especially Jangyeob treatment of T2 treatment was the highest as 1, 605.5 kg/ha T3 treatment was low in spite of high protein content, because dry matter yield was lower than the other treatments. In conclusion, among T1, T2 and T3 treatment, Jangyeob, Togyu and Baekun treatments of T2 treatment showed optimum varieties for intercropping with S.S.H., because they showed high Dry matter yield, protein yield and palatability.

• Bulletin of the Korean Chemical Society
• /
• 제14권1호
• /
• pp.113-117
• /
• 1993

Good yield synthetic routes for the production of new B-alkyl-dithiaborane clusters are reported. The syntheses of the B-alkyl-dithiaboranes are based on the use of Fischer-type carbene reagents to activate the B-H bonds of dithiaborane for alkyl-addition reactions and are the first examples of transition-mediated reactions of dithiaborane to be reported. Thus, reactions employing arachno-$S_2B_7H_8$- and $(CO)_5M{C(R_1)R_2}$ (M = Cr, W; $R_1 = CH_3,\;C_6H_5;\; R_2 = OCH_3,\;SC_6H_5)$ were found to yield the intermidiate anions I, $[(CO)_5M{C(R_1)R_2S_2B_7H_8}]^-$, which upon protonation gave the corresponding neutral, air-sensitive cluster arachno-4-$RCH_2-6,8-S_2B_7H_8(R=CH_3,\;IIa;\;C_6H_5,\;IIb)$ range from 30 to 35% yield. Complexes IIa and IIb are isoelectronic with arachno-6,8-$S_2B_7H_9$ and, on the basis of the spectroscopic data, are proposed to adopt a similar arachno cage geometry in which an $RCH_2$ units are substituted to 4 position boron atom of the arachno-6,8-$S_2B_7H_9$.

• Bulletin of the Korean Chemical Society
• /
• 제21권3호
• /
• pp.291-294
• /
• 2000

The bulk photopolymerization of methyl methacrylate(MMA) with bis(silane)s such as 1,4-$C_6H_4(SiH_3)_2$ (1) and 1,4-$C_6H_4(SiH_2Me)_2$ (2) was performed to produce poly(MMA)s possessing the corresponding bis(silyl) moiety as an end group. For the bis(silane)s, while the polymerizaiton yields and the polymer molecular weights decreased, the TGA residue yields and the relative intensities of Si-H IR stretching bands increased as the relative bis(silane) concentration over MMA increased. The polymerizaion yield, polymer molecular weight, and TGA residue yield of MMA with 1 were found to be higher than those with 2. The bis(silane)s appears to influence significantly upon the photopolymerization of MMA as both chain initiation and chain transfer agents.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1384-1387
• /
• 2007

We have investigated the sputtering and secondary electron emission characteristics of MgO protective layer according to the $O_2$ partial pressure. The MgO layer have been deposited by electron beam evaporation method and have varied the $O_2$ partial pressure as 0, $5.2{\times}10^{-5}$, $1.0{\times}10^{-4}$, and $4.1{\times}10^{-4}$ Torr. It has been known that the secondary electron emission coefficient and the number of defect energy levels increased as the $O_2$ partial pressure increases. So we have investigated the property of sputtering yield according to the $O_2$ partial pressure. We have known that the sputtering yield deceases as the $O_2$ partial pressure increases by using the FIB system.

• Asian-Australasian Journal of Animal Sciences
• /
• 제2권3호
• /
• pp.418-420
• /
• 1989

• 생명과학회지
• /
• 제13권6호
• /
• pp.794-798
• /
• 2003

라세믹 phenyl oxirane 기질에 대한 asymmetric biohydrolysis 활성이 우수한 Rhodosporidium toruloides SJ-4를 생촉매로 이용하여 입체선택적 가수분해 반응을 통해 라세믹 phenyl oxirane 기질로부터 광학활성 (S)-phenyl oxirane를 회분식으로 생산하는 실험을 수행하였다. (R)-phenyl oxirane 이성질체에 대한 초기 가수분해 속도에 영향을 주는 실험인자들인 pH, 반응온도, DMSO cosolvent 첨가량 등에 대해 중심합성계획법을 이용한 반응표면 분석을 통해 가수분해반응 속도를 향상시킬 수 있는 최적 반응조건을 결정하였다. pH 7.4, 반응온도 34℃ 및 DMSO 첨가량 2.3%(v/v)의 조건에서 라세믹 기질 초기 농도 100mM로부터 약 10시간 정도의 반응을 통해 ee 값이 100%인 광학적으로 순수한 (S)-phenyl oxirane를 24% 정도 (이론수율 = 50%)의 높은 수율로 얻을 수 있었다. ^u Batch production of (S)-phenyl oxirane was investigated using epoxide hydrolase activity of Rhodosporidium toruloides SJ-4. Effect of reaction condition of asymmetric biohydrolysis of racemic phenyl oxirane was analyzed and optimized by response surface methodology. The optimal conditions of pH, temperature and DMSO cosolvent ratio were 7.4, 34 ℃, and 2.3%(v/v), respectively. The final yield was enhanced up to 67%, and reaction times required to reach 99% ee (enatiomeric excess) decreased down to 50% by response surface methodology Enantiopure (S)-phenyl oxirane with 100% enantiopurity and 24% yield (theoretical yield = 50%) was obtained from racemic substrate.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제8권1호
• /
• pp.67-71
• /
• 2004

Ten improved mulberry varieties (Vl, C1730, C2016, C2017, Anantha, RFS-175, Thallaghatapura, Vishala, S1 and S1635) were evaluated through enzyme assay and estimation of soluble protein content followed by regression analysis, grown under irrigated conditions in the alluvial soils of Gangetic plains of West Bengal in India for five successive crops in a year, The nitrate reductase (EC No. 1.6.6.1) activity (NRA, $\mu$mol N $O_2$- $h^{-1}$ $g^{-1}$ fr, wt.), total soluble protein (mg $g^{-1}$ fr, wt.) was estimated which showed to vary significantly in the tested varieties. In addition to these, the other parameters like unit leaf fresh and dry weight (g), moisture ％, unit leaf area ($\textrm{cm}^2$), specific leaf weight (g c $m^{-2}$ ), total soluble sugar (mg $g^{-1}$ fr, wt.), leaf yield/plant (kg), shoot yield/plant (kg) and net photosynthetic rate (NPR, $\mu$㏖ $m^{2}$ $s^{-1}$ ) were also studied which showed to vary significantly in tested varieties. Among them, S1635, haying higher NRA (13.25 $\mu$㏖ N $O_2$- $h^{-l}$ $g^{-1}$ fr, wt.), total soluble protein (39.63mg $g^{-1}$ fr, wt.), NPR(16.66 $\mu$㏖ $m^{-2}$ $s^{-1}$ ), total soluble sugar (48.44 mg $g^{-1}$ fr. wt.), leaf yield/plant (0.689 kg) and shoot yield/plant (1.135 kg) showed its superiority over other tested varieties. Regression and correlation coefficients were analysed, and a strong positive correlation was found between NRA ＆ total soluble protein, NRA ＆ NPR, NRA ＆ total soluble sugar, NRA af unit leaf weight, NRA ＆ specific leaf weight, NRA ＆ leaf yield/plant, NRA ＆ shoot yield/plant, NPR ＆ leaf yield and NPR ＆ specific leaf weight.t.

• 소성∙가공
• /
• 제21권5호
• /
• pp.324-329
• /
• 2012

Mg-(9-x)Sn-xAl-1Zn (x=1, 2, 3 and 4 wt.%) alloys were subjected to indirect extrusion, and the microstructure and mechanical properties of the as-extruded Mg-Sn-Al-Zn (TAZ) alloys were investigated. The TAZ 811 alloy exhibited a finer grain structure than the TAZ 541 alloy due to a larger number of Mg2Sn particles, which pinned the grain boundaries and prevented growth of recrystallized grains. The TAZ alloys showed an unusual yield asymmetry behavior. The tension-compression yield asymmetry increased with decreasing average grain size. The TAZ 811 alloy with a small grain size exhibited a larger yield asymmetry than that of the TAZ 541 alloy having a relatively large grain size, which is mainly attributed to the low Al content and large number of second phase particles in the TAZ 811 alloy.

• 소성∙가공
• /
• 제25권3호
• /
• pp.189-194
• /
• 2016

In the current study, spring-back of DP980 steel sheet was numerically evaluated for U-bending using a yield function with a hardening model. For spring-back prediction, two types of yield functions - Hill'48 and Yld2000-2d - were considered. Additionally, isotropic hardening and the Yoshida-Uemori model were used to investigate the spring-back behavior. The parameters for each model were obtained from uniaxial tension, uniaxial tension-compression, uniaxial tension-unloading and hydraulic bulging tests. The numerical simulations were performed using the commercial software, PAM-STAMP 2G. The results were compared with experimental data from a U-bending process.

• Preventive Nutrition and Food Science
• /
• 제21권2호
• /
• pp.138-146
• /
• 2016

In this study, we report the optimal extraction conditions for obtaining organosulfur compounds, such as cycloalliin, from garlic by using principal component analysis (PCA). Extraction variables including temperature ($40{\sim}80^{\circ}C$), time (0.5~12 h), and pH (4~12) were investigated for the highest cycloalliin yields. The cycloalliin yield (5.5 mmol/mL) at pH 10 was enhanced by ~40% relative to those (~3.9 mmol/mL) at pH 4 and pH 6. The cycloalliin level at $80^{\circ}C$ showed the highest yield among the tested temperatures (5.05 mmol/mL). Prolonged extraction times also increased cycloalliin yield; the yield after 12 h was enhanced ~2-fold (4 mmol/mL) compared to the control. Isoalliin and cycloalliin levels were inversely correlated, whereas a direct correlation between polyphenol and cycloalliin levels was observed. In storage for 30 days, garlic stored at $60^{\circ}C$ (11 mmol/mL) showed higher levels of cycloalliin and polyphenols than those at $40^{\circ}C$, with the maximum cycloalliin level (13 mmol/mL) on day 15. Based on the PCA analysis, the isoalliin level depended on the extraction time, while cycloalliin amounts were influenced not only by extraction time, but also by pH and temperature. Taken together, extraction of garlic at $80^{\circ}C$, with an incubation time of 12 h, at pH 10 afforded the maximum yield of cycloalliin.