• 한국재료학회지
• /
• 제19권4호
• /
• pp.220-223
• /
• 2009

Lithium dihydrogen phosphate ($LiH_2PO_4$) powder was purchased from Aldrich Chemical Co. From the scanning electron microscope (SEM) observation, these polycrystals have dimensions in the range of $25-250{\mu}m$. The electrical conductivity was measured at a measuring frequency of 1 kHz on heating polycrystalline lithium dihydrogen phosphate ($LiH_2PO_4$) from room temperature to 493 K. Two anomalies appeared at 451 K ($T_{p1}$) and 469 K ($T_{p2}$). The electrical conductivity reached the magnitude of the superprotonic phases: $3{\times}10^{-2}{\Omega}^{-1}cm^{-1}$ at 451 K ($T_{p1}$) and $1.2{\times}10{\Omega}^{-1}cm^{-1}$ at 469 K ($T_{p2}$). It is uncertain whether the superprotonic phase transformations are due to polymorphic transitions in the bulk, surface transitions, or chemical reactions (thermal decomposition) at the surface. Considering several previous thermal studies (differential scanning calorimetry and thermogravimetry), our experimental results seem to be related to the last case: chemical reactions (thermal decomposition) at the surface with the progressive solid-state polymerization.

• 상하수도학회지
• /
• 제21권6호
• /
• pp.745-753
• /
• 2007

By struvite and hydroxyapatite crystallization, was high concentration of nitrogen and phosphorus in wastewater simultaneously. Particularly, removal of nitrogen and phosphate for crystallization have been applied to landfill leachates and animal wastewater. The purpose of this study is to decide the optimum struvite crystallization factors, sequence of $Mg^{2+}$ addition, pH control and the molar ratio of $Mg^{2+}$ over $PO_4^{3-}$. In conclusion, dosage of the magnesium followed by pH control formed magnesium hydroxide, so pH was decreased. Therefore, pH adjustment should followed by after magnesium dosage and then pH should be adjusted to 11. Over pH 10, it was not good for struvite crystallization efficiency by side reaction. Following of the $Mg^{2+}$ and the $PO_4^{3-}$ are dosed excessively, the removal efficiency of the $NH_4^+$ increased. A molar ratio of $Mg^{2+}:NH_4^+:PO_4^{3-}$, 1.3:1:1.3 was the most on effective for $NH_4^+$ removal at pH 9.5. But for the perfect removal $NH_4^+$, it is thought to be that molar ratio should be 2:1:2.

• KSBB Journal
• /
• 제5권4호
• /
• pp.355-363
• /
• 1990

서울 인근의 생활하수에서 메탄올을 이용하는 박테리아를 분리하였다. 이의 최적 성장을 위한 온도 및 pH는 각각 $33^{\circ}C$ 및 7.1이었다. 최대비성장율은 $0.42hr^{-1}$을 나타내었다. 최소 배지조성은 기본배지의 양을 안정상테에서 연속발효법으로 구하였으며, 그 조성은 다음과 같다(g / l); Methanol 40, $(NH_4)_2\;SO_42,\;KH_2PO_4\;1.5,\;K_2HPO_4\;0.2,\;H_3PO_4\;0.79,\;Na_2HPO_4{\cdot}12H_2O\;0.15,\;MgSO_4{\cdot}7H_2O\;1.5,\;FeSO_4{\cdot}7H_2O\;0.034,\;MnSO_4{\cdot}4H_2O\;0.005,\;CuSO_4{\cdot}5H_2O\;0.0027,\;CaCl_2{\cdot}2H_2O\;0.25,\;ZnSO_4{\cdot}7H_2O\;0.007,\;(NH_4)_6\;Mo_7O_{24}{\cdot}4H_2O\;0.00048,\;H_3BO_3\;0.00068,\;CoCl_2\; 0.00024$ 최적 배지 조건에서 구한 최대 세포생산성은 3.8g / l / hr였으며, 이때의 회석율은 $0.23hr^{-1}$이었다. 최대 세포농도와 그대의 단백질의 함량은 각각 19.5g / l 및 70%였으며, 이때의 회석율은 $0.1hr^{-1}$이었다.

• Bulletin of the Korean Chemical Society
• /
• 제26권2호
• /
• pp.241-247
• /
• 2005

A series of proton conductive inorganic-organic hybrid membranes doped with phosphoric acid ($H_3PO_4$) and/or triethylphosphate (PO(OEt)$_3$) have been prepared by sol-gel process with 3-glycidoxypropyltrimethoxysilane (GPTMS), 3-aminopropyltriethoxysilane (APTES) and tetraethoxysilane (TEOS) as precursors. High proton conductivity of 3.0 ${\times}$ $10^{-3}$ S/cm with composition of 50TEOS-30GPTMS-20APTES-50$H_3PO_4$ was obtained at 120 ${^{\circ}C}$ under 50% relative humidity. Thermal stability of membrane was significantly enhanced by the presence of SiO$_2$ framework up to 250 ${^{\circ}C}$. XRD revealed that the gels are amorphous. IR spectra showed a good complexation of $H_3PO_4$ in the matrix. The conductivity under 75% relative humidity was significantly improved by addition of APTES due to the increase in concentration of defected site in hybrid matrix. The effect of PO(OEt)$_3$, humidifying time, and heat-treatment were also investigated. PO(OEt)$_3$ had no improvement on conductivity and conductivity increased with humidifying time, however, decreased with heating temperature.

• 한국표면공학회지
• /
• 제29권4호
• /
• pp.253-260
• /
• 1996

Regular spangle hot dip galvanized steel sheets were made in the zinc bath containing a small amount of Al and with the addition of Pb, Sb, Sb-Mg, Sb-Cu and Bi respectively whose average glosses were measured. Zero-spangle hot dip galvanized steel sheets were also made by spraying a 2% $NH_4H_2PO_4$ solution on molten coating surfaces with exactly the same chemical compositions as above used for regular spangle and whose glosses and corrosion losses were also evaluated. For manufacturing zero- spangle hot dip galvanized steel sheets with high brightness, the zinc bath with 0.02%Sb and the spraying of a 2% $NH_4H_2PO_4$ solution were proposed and for better brightness and corrosion resistance, the zinc bath with 0.02% Sb-0.50%Mg and the spraying of a 2% $NH_4H_2PO_4$ solution were also proposed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.469-471
• /
• 2001

Dry grinding of a mixture of CaCO$_3$ and Ca(H$_2$PO$_4$)$_2$.$H_2O$ was conducted using a planetary ball mill in order to investigate solid state reaction for a synthesis of hydroxyapatite(Ca$_{10}$(PO$_4$)$_{6}$(OH)$_2$, HAp) through mechanochemical treatment method. The raw materials, which are composed of waste oyster and calcium biphosphate Ca(H$_2$PO$_4$)$_2$.$H_2O$, were mixed and then treated mechanochemically. The synthesis of hydroxyapatite(Ca$_{10}$(PO$_4$)$_{6}$(OH)$_2$, HAp) from the mixture was almost completed by about 60 minute grinding. The formation of HAp monophase in the ground mixture was characterized through X-ray diffraction (XRD) analysis. Moreover, the formation of HAp monophase depending on the grinding time was improved by increasing the grinding time.ime.ime.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.668-673
• /
• 1997

A Single-crystalline Mn-Zn Ferrite (110 orientation) was masklessly etched by focused Ar laser irradiation in an H$_3$PO$_4$ solution. The depth of the etched grooves increases with increasing a laser power, decreasing a scan speed, and increasing the H$_3$PO$_4$concentration. The width of the etched grooves increases with a increasing laser power, but was relatively insensitive to the scan speed and H$_3$PO$_4$concentration. High etching rate of up to 714 ${\mu}{\textrm}{m}$/s and an aspect ratio of 6 for vertical slab structure have been obtained by the light-guiding effect of the laser bean in the H$_3$PO$_4$ solution.

• The Korean Journal of Physiology
• /
• 제12권1_2호
• /
• pp.35-40
• /
• 1978

경사대에 의한 수등적체위 변화시 분시 호흡수, 혈액 pH, $PCO_2$ 및 $PO_2$의 변화를 관찰하고 다음과 같은 성적을 얻었다. 체위변화시 호흡수는 기립위에서는 수평대조치에 비해 감소하고 도립위에서는 많은 증가를 보였다. 혈액 pH는 기립위에서 수평대조치에 비해 동맥혈은 0.2%가 증가되었고 정맥혈은 0.3%가 감소하였다. 도립위에서는 수평대조치와 거의 변화가 없는 값을 나타내었다. $PCO_2$는 기립위에서 수평대조치에 비해 동맥혈은 8.3%, 정맥혈은 0.3%가 감소되었고 도립위에서는 동맥혈은 20.1%가 감소되고 이것은 통계적으로 의의있는 변화였다. 정맥혈은 7%가 감소되었다. $PO_2$는 기립위에서 동맥혈은 2%가 증가, 정맥혈은 21.7%가 감소되었으며 이것은 통계적으로 의의있는 변화였다. 도립위에서는 동맥혈은 11.4%가 증가되고 정맥혈은 14.1%가 감소되었다. 도립위에서 동맥혈의 $PO_2$가 증가 되는 원인은 도립중의 과도호흡하에 의한 것이라 사료되며 정맥혈의 $PO_2$의 감소는 도립중의 근육수축에 연유하는 산소소비량의 증가가 그 원인이라고 사료된다. 또 도립위에서 $PO_2$가 감소하고 수소ion의 감소가 예상됨에도 불구하고 pH가 증가하지 않는것은 산소소비가 증가되고 정맥혈의 $PO_2$가 감소되는 것으로 봐서 염기성해당으로 젖산이 증가된것이 아닌가 생각된다.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.805-810
• /
• 2008

Using metallic Ti powder as raw materials and 1,2-diaminocyclohexane (DACH) as the trial template, two novel reduced titanophosphate open-structures were hydrothermally isolated by varying the $H_3PO_4/H_2O$ ratio to adjust the pH value. TiPO-1 crystallizes in orthorhombic Pbca space group with cell parameters a = 21.956(3) $\AA$, b = 8.6268(11) $\AA$, c = 7.2883(9) $\AA$, V = 1380.5(3) $\AA^3$, Z = 4. TiPO-2 crystallizes in triclinic space group P$\bar{1}$ with parameters a = 5.1620(10) $\AA$, b = 8.815(2) $\AA$, c = 10.655(3) $\AA$, $\alpha$ = $99.45^{\circ}$, $\beta$ = $102.94^{\circ}$, $\gamma$ = $91.06^{\circ}$, V = 465.34 $\AA^3$. TiPO-1 is constructed by infinite -Ti-O-Ti-O- linkage that is capped by $PO_4$ groups to form a chain structure with protonated DACH molecules occupying the interchain spaces. TiPO-2 represents a rare 3-D reduced titanophosphate with 12-MR channels. The structure of TiPO-2 is a neutral framework with water molecules located in the channels.

• 대한화학회지
• /
• 제9권3호
• /
• pp.128-133
• /
• 1965

Hydrazonium diphosphate 結晶은 單斜晶係에 屬하여 單位格子는 $a=4.52{\pm}0.02, b=8.06{\pm}0.03, c=10.74{\pm}0.03 {\AA}$ 및 ${\beta}=100{\pm}0.5^{\circ}$이다. 單位格子속에는 2個의 化學單位가 들어있으며 空間群은 $P2_1/C$이다. 이 物質의 結晶構造를 Flourier 合成法과 Patterson 合成法에 依하여 決定하였다. $PO_4^{+++}$ 이온은 大略 regular 한 正四面體를 이루고 있으며 P-O 距離의 平均値는 $1.55{\AA}$이다. $N_2H_6^{++}$ 이온에서 N-N 距離는 $1.40{\AA}$이며 이값은 $N_2H_6SO_4$結晶에서의 값과 一致한다. 한 分子內에는 對稱의 中心이 있으며 各 N 原子는 2.62, 2.79 및 $2.89{\AA}$의 距離를 갖인 N…O型 水素結合을 이루고 있다. 또 다른 $PO_4^{+++}$이온 間에는 $2.63{\AA}$의 距離를 가진 한個의 O…O 水素結合을 이루고 있다. 이 物質의 構造는 上記한 N…O 및 O…O水素結合으로 三次元的 network를 이루고 있다.