• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.415-420
• /
• 2016

To enhance electrochemical performances of anode materials, the surface of coal tar pitch (CTP) was modified by incorporating heteroatoms through chemical treatment with phosphoric acid ($H_3PO_4$). The prepared anode materials with modified CTP was analyzed by XRD, FE-SEM and XPS. The electrochemical performances of modified CTP were investigated by constant current charge/discharge test, rate performance, cyclic voltammetry and impedance tests using the electrolyte of $LiPF_6$ dissolved in the mixed organic solvents (ethylene carbonate : dimethyl carbonate = 1 : 1 vol% + vinylene carbonate 3 wt%). The coin cell using modified CTP ($H_3PO_4/CTP$ = 3 : 100 in weight) has better initial capacity and initial efficiency (489 mAh/g, 82%) than those of other composition coin cells. Also, it was found that the capacity retention was 86% after 30 cycles and the rate capability was 87% at 2 C/0.1 C.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.89-92
• /
• 2007

Partail oxidation(POX) of n-butane was investigated in this research by employing ceria-promoted Ni/calcium hydroxyapatite catalysts ($Ce_xNi_{2.5}Ca_{10}(OH)_2(PO_4)_6$ ; x = $0.1{\sim}0.3$) which had recently been reported to exhibit good catalytic performance in POX of methane and propane. The experiments were carried out with changing ceria content, $O_2/n-C_4H_{10}$ ratio and temperature. As the $O_2/n-C_4H_{10}$ feed ratio increased up to 2.75, n-$C_4H_{10}$ conversion and $H_2$ yield increased and the selectivity of methane and other hydrocarbons decreased. But with $O_2/n-C_4H_{10}$ = 3.0, $n-C_4H_{10}$ conversion and $H_2$ yield decreased. This is considered due to that too much oxygen may inhibit the reduction of Ni or induce the oxidation of Ni, which results in poor catalytic activity. The optimum $O_2/n-C_4H_{10}$ ratio lay between 2.50 and 2.75. $Ce_{0.1}Ni_{2.5}Ca_{10}(OH)_2(PO_4)_6$ showed the highest $n-C_4H_{10}$ conversion and $H-2$ yield on the whole. In durability tests, higher hydrogen yield and better catalyst stability were obtained with the $O_2/n-C_4H_{10}$ ratio of 2.75 than with the ratio of 2.5.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.167-173
• /
• 1999

A new synthetic medium was developed for the submerged mycelial cultures of Phellinus linteus. The medium for maximum mycelial growth of Phellinus linteus (3 days incubation, 28$^{\circ}C$, pH 5) consisted of (per 1 L): glucose, 90 g peptone, 10 g soluble starch, 10 g yeast extract, 3 g KH2PO4, 1 g MgSO4.7H2O, 1 g and CaCl2, 0.1 g. The concentrations of glucose, peptone, yeast extract, KH2PO4, MgSO4.7H2O, and CaCl2 were examined in the ranges of 10~90 g/L, 0~10 g/L, 0~15 g/L, 0~2 g/L, 0~1 g/L, and 0~0.5 g/L, respectively. The dry weight of mycelium in 3 days increased to 16.79 mg/mL using the new synthetic medium. The optimum temperature for mycelial growth of Phellinus linteus was 28$^{\circ}C$. The concentrations of KH2OP4, CaCl2, and yeast extract, which gave the maximum mycelial growth of Phellinus linteus, existed in the concentration ranges examined in this study. But, in the cases of other compositions (MgSO4.7H2O, peptone, and glucose), the mycelial growth of Phellinus linteus increased with the concentration in the ranges.

• KSBB Journal
• /
• v.6 no.1
• /
• pp.91-98
• /
• 1991

The media compositions and culture conditions were optimized for mycelial growth of Coriolus versicolor and Lentinus edodes. Media composition for optimal growth of Coriolus versicolor was 2.0% glucose 0.4% peptone and 0.6% yeast extract. Media composition for optimal growth of Lenttnus edodes was 2.0% glucose 2.0% starch 0.4% bacto-soytone and 0.6% yeast extract. The media supplemented with KH2PO4, 0.046% KH2PO4 0.1% and MgSO4, .7H2O 0.05% supported better mycelial growth than the media without mineral salts. The optimum temperature for mycelial growth ranged from $25^{\circ}C$-28$^{\circ}C$. The optimum pH range for mycelial growth of Coriolus versicolor was 5.2~5.6 while that of Lentinus edodes appeared to be 5.75.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1995.10a
• /
• pp.89-92
• /
• 1995

순환식 수경재배에서 배양액의 조성이나 농도를 정해놓고 일정기간 공급하면 배양액의 pH와 EC의 변화가 생긴다. 보통 배양액의 공급은 재배개시시에 다량 공급하고 그 이후에는 부족한 양만큼을 공급하게 되는데, 시작배양액과 추가배양액의 조성은 같아도 이온의 총량은 다르다. 때문에 재배기간중에 pH의 변화양상이 다르게 나타나는 것이다. 이러한 현상을 피하기 위하여 이온의 총량을 기초로 하여 추가배양액의 이온조성을 조정하여 공급하므로써 배양액의 pH를 안정하게 유지할 수 있을 것으로 추측한다. (중략)

• Korean Journal of Food Science and Technology
• /
• v.3 no.1
• /
• pp.68-77
• /
• 1971

Ninty four strains of lysine producing micro-organisms in culture broth during fermentation have been isolated from soil and other sources. From the comparison of the amounts of lysine produced, 6 strains have been selected as the potentially useful strains, and identified tentatively as Micrococcus sp. (S-16-4), Corynebactcrium sp. (S-27-12, S-281-3, CBY-4) and Brevibacterium sp. (M-6-71, F-629-2), respectively. From the further studies with Corynebacterium sp., S-27-12, its maximum yield was found to be 4mg lysine/ml of synthetic medium, consist of glucose(7.5%), urea(0.6%), $KH_2PO_4(0.2%)$, $Na_2HPO_4(0.05%)$, $MgSO_4{\cdot}7H_2O(0.03%)$, $MnSO_4{\cdot}4H_2O(0.001%)$ and $FeSO_4{\cdot}7H_2O(0.0005%)$ at pH 7.2 and $30^{\circ}C$ after 4 days.

• Journal of the Korean Chemical Society
• /
• v.65 no.4
• /
• pp.249-253
• /
• 2021

Litter and manure were obtained at a cow house of a livestock farm in Andondg city. We examined the change of formation of nitrogen and phosphorous from these samples and tried to suggest a more useful and realistic way for removing them. Constituent and its content of sample were identified by XRF. NO₂^-, NO₃^-, and PO₄^3- ions and NH₄⁺, T-P and T-N released from sample were analyzed using ion chromatograph and UV/Vis spectrometry, respectively. As the results of this study, the ammonia nitrogen in the early stage of cow excretion is a need to make an ammonia gas state that can be immediately volatile by increasing the pH. Nitrogen and phosphorous, the main source of nutrition in green algal bloom can be removed by transforming insoluble salts such as calcium phosphate (CaHPO₄·3H₂O) and struvite (NH₄MgPO₄·6H₂O), respectively, with addition of Ca and Mg after stimulating fermentation of manure.

• Journal of the Korean institute of surface engineering
• /
• v.5 no.2
• /
• pp.1-4
• /
• 1972

We have studied about the optimum chemical etching and sensitizing conditions of the plating on plastics. As specimen 'Mitzubishi Nobren MM2A' was used. The results were as follow. 1) The optimum chemical etching conditions. Etched the specimens for $10{\sim}40$ minutes at $70{\sim}80^{\circ}C$ with the etching solution of table 1, and for $10{\sim}15$ minutes at $65{\sim}70^{\circ}C$ with the etching solution of table 2 Table 1. Etching solution (I) Composition : $H_2SO_4(95%)-Component : 250 ml, Composition : $H_3PO_4(85%)$ - Component : 75ml, Composition : $K_2Cr_2O_7$ - Component : 12.5g, 2) The optimum sensitizing conditions. Sensitized the specimens for $60{\sim}90$ seconds at $25^{\circ}C$ with the sensitizing solution of table 3 Table 2. Etching solution (II) Composition : $H_2SO_4(95%)$ - Component : 22.5ml, Composition : $H_3PO_4(85%)$ - Component : 15ml, Composition : $CrO_3$ - Component : 105g, Composition : Water - Component : 150 ml, Table 3. Sensitizing solution Composition : $SnCl_2$ - Component : 9g, Composition : HCl(35%) - Component : 36ml, Composition : Water - Component : 300 ml

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.406-406
• /
• 2011

결정질 태양전지에서 도핑(Doping)은 반도체(Semiconductor)의 PN 접합(Junction)을 형성하는 중요한 역할을 한다. 도핑은 반도체에 불순물(Dopant)을 주입하는 공정으로 고온에서 진행되며 온도는 중요한 변수(Parameter)로 작용한다. 본 연구에서는 여러 가지 에미터(emitter)층 형성방법 중에 가장 저가이면서 공정과정이 간단하며 대면적 도핑이 용의한 Spray 방법을 통해 효과적인 에미터 층 형성의 최적화를 위해 DI water에 각각 1%, 3%, 5% 7%로 희석된 H3PO4용액 으로 850$^{\circ}C$에서 열처리 시간을 가변해 가며 최적화된 면저항과 표면농도 특성을 분석하였다. 도핑소스가 웨이퍼(wafer) 각각의 표면에 흡착시킨 후 오븐에 넣어 150$^{\circ}C$에서 5분간 건조시킨 후 퍼니스(furance)에 넣어 시간을 가변해 가며 도핑시켰다. Spray 방식은 기존의 방식보다 저렴하고 In-line 공정에 적합하며 대용량으로 전환이 쉽다는 많은 장점을 가지고 있다. 도핑시 먼저 spray를 이용하여 웨이퍼 표면에 균일하게 용액을 흡착시킨 후 오븐에서 150$^{\circ}C$에서 5분간 건조 후 furnace에 넣어 850$^{\circ}C$에서 시간을 가변 해가며 실험하였다. H3PO4용액의 비율이 1%일 때는 2분 이상 열처리를 하였을 때 60${\Omega}/{\Box}$ 이하로 내려가지 않았다. 이는 최초 표면농도가 낮아 더 이상 확산되지 않음을 의미한다. 또한 H3PO4의 비율이 3% 이상일 때는 열처리 시간이 1분 이하일 때 면저항의 변화가 거의 없었으나 2분 이상일 때는 시간에 따라서 점차 낮아졌으며 균일도 역시 좋아졌다. 이는 H3PO4의 비율이 3% 이상일 때는 표면농도가 높아서 1분 이하의 열처리 시간에서는 확산해 들어가는 양이 거의 같음을 알 수 있었다.

• Journal of Plant Biology
• /
• v.21 no.1_4
• /
• pp.33-38
• /
• 1978

Phosphate absorption from a Na2H32PO4 solution by Oryza sativa L. was studied in order to elucidate kinetic mechanisms of ion transport. The rates of phosphate absorption from different concentraitons indicated the presence of dual mechanisms in root tips, one in the low (1$\times$10-6 to 8$\times$10-5M) and the other in the high (1$\times$10-4 to 8$\times$10-3M). A phosphate compensation point of phosphate transport was revealed with a 1$\times$10-6M solution of Na2H32PO4. The kinetic model that ion transport involves an exchange reaction of absorption and desorptin is prosposed as follows: where C represents an ionic-specific organic carrier in the membrane; M, Mo and Mi are the mineral ions, M-outside and M-inside; MC is a carrier-ion complex; and the K's represent rate constants. In this model, the Mi velocity, v, is given by: {{{{v= {dMi} over {dt}= {(K1K3Mo-K2K4Mi) Ct} over {(K2＋K3)＋K1Mo＋K4Mi} }} where Ct is equal to C＋MC, and t is time.