• Bulletin of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.324-327
• /
• 1997

Water soluble iridium complex, IrCl(CO)(TPPTS)2·χH2O (1) (TPPTS=m-trisulfonated triphenylphosphine) has been prepared from the reaction of a water soluble complex, IrCl(COD)(TPPTS)2·6H2O (COD=l,5-cyclooctadiene) with CO and unambiguously characterized by electronic absorption, 31P NMR, 13C NMR and IR spectral data. Complex 1 catalyzes the hydration of terminal alkynes to give ketones in aqueous solutions at room temperature. The rate of PhC≡CH hydration dramatically increases with addition of MeOH to the reaction mixture in H2O, which is understood in terms of i) the excellent miscibility between H2O and MeOH and ii) the assumed catalytic hydration pathway involving the initial formation of (alkyne)IrCl(CO)(TPPTS)2.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1621-1623
• /
• 1996

The dielectric and polarizable properties of 0.85Pb$Mg_{1/3}Nb_{2/3}$)$O_3$-$0.125PbTiO_3$-$0.25BaTiO_3$ Ceramics have been investigated as a addition of the amount of $La_{2}O_{3}$($0{\leq}x{\geq}0.05$). The Temperature-dependant electrostictive characteristics of 0.85PMN-0.125PT-0.25BT relaxor ferroelectic system were improved by enhencing the extent of the diffuse phase transition(DPT). This was achieved using PMN-PT-BTceramics by the partial substitution of La at the Pb site. The curie temperature and the maximum dielectic permittivity decreased by substituting $La_{2}O_{3}$ and the electic field-related hysteresis phenomena decreased with increasing $La_{2}O_{3}$ substitution amount. It is showed decreasing in induced strain for electric field with increasing $La_{2}O_{3}$ substitution.

• Microbiology and Biotechnology Letters
• /
• v.7 no.3
• /
• pp.157-164
• /
• 1979

These experiments were performed to investigate the culture condition, characteristic of crude enzyme and the heat resistance of the acid protease by Aspergillus awamori U-3. The results obtained were as follows: 1. The optimum culture temperature and time on wheat bran medium and defatted rice bran medium were 3$0^{\circ}C$ and 72 hrs, respectively. The optimum amount of added water was 100~120 ％ on wheat bran medium and 100~130 ％ on de-fatted rice bran medium. 2. Of the these various ingredients, addition of KN $O_3$, glutamic acid and glucose on wheat bran medium and addition Of KN $O_3$, (N $H_4$)$_2$S $O_4$, glucose, lactose, K $H_2$P $O_4$ and MgC $l_2$ on defatted rice bran medium were very effective. On wheat bran medium, concentration of addition of glucose, KN $O_3$ and glutamic acid were 3.0~4.0％, 0.2~0.4 ％ and 1.0％, respectively. 3. The optimum pH for the enzyme action was 2.4 ％, the optimum temperature about 45$^{\circ}C$ and the stable pH range 2.0~5.0, The enzyme was stable below 5$0^{\circ}C$ and was inactivated rapidly above 5$0^{\circ}C$. 4. The addition of CaC $l_2$ and CaS $O_4$ as the heat resistance agents showed the slight resistance. 5. When the enzyme solution added with the heat resistance agents (CaC1$_{2}$ and CaS $O_2$) was heated for 10-30 minutes at 6$0^{\circ}C$, their remaining activities were decreased largely above 20 minutes and The heat resistance effects of CaC $l_2$ and CaS $O_4$ were not observed almost at 8$0^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.9
• /
• pp.802-807
• /
• 1996

Second-order rate constants have been measured spectrophotometrically for the reactions of aryl benzoates (X-C6H4CO2C6H4-Y) with EtO-, Z-C6H4O- and Z-C6H4C(Me)=NO- in absolute ethanol at 25.0 ℃. All the reactions have been performed in the presence of excess 18-crown-6 ether in order to eliminate the catalytic effect shown by alkali metal ion. A good Hammett correlation has been obtained with a large ρ- value (-1.96) when σ- (Z) constant was used for the reaction of p-nitrophenyl benzoate (PNPB) with Z-C6H4O-. Surprisingly, the one for the reaction of PNPB with Z-C6H4C(Me)=NO- gives a small but definitely positive ρ- value (＋0.09). However, for reactions of C6H5CO2C6H4-Y with EtO-, correlation of log k with σ- (Y) constant gives very poor Hammett correlation. A significantly improved linearity has been obtained when σ0 (Y) constant was used, indicating that the leaving group departure is little advanced at the TS of the RDS. For reactions of X-C6H4CO2C6H4-4-NO2 with EtO-, C6H5O- and C6H5C(Me)=NO-, correlations of log k with σ (X) constants for all the three nucleophile systems give good linearity with large positive ρ values, e.g. 2.95, 2.81 and 3.06 for EtO-, C6H5O- and C6H5C(Me)=NO-, respectively. The large ρ values clearly suggest that the present reaction proceeds via a stepwise mechanism in which the formation of the addition intermediate is the RDS.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.234-238
• /
• 1996

Second-order rate constants have been measured spectrophotometrically for the reaction of p-nitrophenyl acetate (PNPA) with morpholine, piperazine and piperidine in MeCN-H2O mixtures of varying compositions. The rate of the present aminolysis decreases upon additions of MeCN into H2O up to near 30-40 mole % MeCN and remains nearly constant upon further additions of MeCN. The reaction of PNPA with anionic nucleophiles, such as HO-, p-chlorophenoxide and butane-2,3-dione monoximate, has also exhibited two distinguishable reactivity zones. However, the reactivity trend for the anionic nucleophiles is quite different from the one obtained for the amine system, e.g. an initial rate decrease in the H2O-rich region followed by an increasing rate trend upon further additions of MeCN in the MeCN-rich region. The rate behaviors shown by the amine system in the MeCN-rich and by the anionic system in the H2O-rich region are unexpected based on the Hughes-Ingold rules. The present unusual rate trends have been attributed to changes in the solvent structure and pKa of the nucleophiles upon the addition of MeCN into H2O. The effect of solvent appears to be more significant for the TS than the GS, and the TS structure is considered to become tighter in the higher MeCN concentration.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.60.2-60.2
• /
• 2010

A $TiO_2$ films in dye-sensitized solar cells was fabricated using $TiO_2$ colloidal sol prepared from titanium iso-propoxide used as a starting material by applying the sol-gel method. It was characterized by particle size analyzer, XRD, FE-SEM, and BET analysis. The adsorption isotherms of dye molecule on $TiO_2$ films were obtained at three different temperatures (30, 45, $60^{\circ}C$) and at three different pH (3, 5, 7). The adsorption kinetics of dye molecule on $TiO_2$ films were obtained at three different temperatures (30, 45, $60^{\circ}C$. The adsorption experimental data were correlated with Langmuir isotherm model and pseudo-second-order model. Also the isosteric enthalpies of dye adsorption were calculated by the Clausius-Clapeyron equation. In addition, the adsorption energy distribution functions which describe heterogeneous characteristics of nanocrystalline $TiO_2$ film surface were calculated by using the generalized nonlinear regularization method. We found that efficient adsorption of N719 dye from aqueous solution onto $TiO_2$ films can be successfully achieved by dye adsorption conditions and morphology of $TiO_2$ films.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04a
• /
• pp.84-88
• /
• 1999

In chlorine dioxide delignigication or bleaching, chlorate is mainly formed by the reaction between chlorite and hypochlorous acid, thus scavengers of chlorine or hypochlorous acid can be used to reduce the formation of chlorate which is unfavorable to environment. In this study, additives such as sulfamic acid, DMSO, hydrogen peroxide, or sodium chlorite was added to chlorine solution or pure $ClO_2$ solution to check their reactivity with $Cl_2$ and $ClO_2$. These additives were also added directly into general $ClO_2$ solution which contained certain amount of chlorine, then the additive-treated $ClO_2$ solution were used in bleaching stages. The aim of this procedure was to remove the original amount of chlorine that was thought to be possibly the main reason for the formation of chlorate and AOX. The additives were found to be able to eliminate chlorine very fast and selectively, but $H_2$ $O_2$ should be used under pH4, otherwise it also reacts with $ClO_2$. After the additives reacted With $Cl_2$, DMSO turned into an inactive product $(CH_3)_2SO_2$, While Sulfamic acid turned into $HClSO_3H$ that still remained active in oxidation, and $NaClO_2$ produced $ClO_2$. The addition of $HNaClO_2$ showed significant improvement in delignification but the deeper delignification led to higher formation of chlorate. When the additive-treated chlorine dioxide solutions were used in bleaching, both sulfamic acid, DMSO, and hydrogen peroxide showed no significant changes of DE brightness and Kappa number. The formation of chlorate was reduced by addition of sulfamic acid, DMSO and hydrogen peroxide.

• Journal of the Korean Ceramic Society
• /
• v.44 no.9
• /
• pp.471-476
• /
• 2007

The hydration mechanism of the $3CaO{\cdot}Al_2O_3-CaSO_4{\cdot}2H_2O$ system in the presence of alkali sulfates has been investigated. The early hydration rate of $3CaO{\cdot}Al_2O_3$ was accelerated by the addition of $Na_2SO_4$ and $K_2SO_4$. This is closely related to the formation of syngenite $(CaSO_4{\cdot}K_2SO_4{\cdot}H_2O)$, and the U-phase added $K_2SO_4$ and $Na_SO_4$ in the $3CaO{\cdot}Al_2O_3-CaSO_4{\cdot}2H_2O$ system, respectively. The formation of the rigid syngenite and U-phase structure led to rapid setting and decreases the sulfate content in the liquid phase of the hydrating cement to the extent that it cannot adequately retard the hydration of $3CaO{\cdot}Al_2O_3$. In case of the alkali sulfate not added to the $3CaO{\cdot}Al_2O_3-CaSO_4{\cdot}2H_2O$ system, the ettringite was transformed to monosulfoaluminate immediately after the consumption of gypsum. However, when the alkali sulfates were added to this system, the ettringite did not transform to monosulfoaluminate immediately even though the gypsum was completely consumed. There was a stagnation period to transform to the monosufoaluminate after the consumption of gypsum because the syngenite and U-phase remained as the sulfate source.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.52-57
• /
• 1992

Using the new type auxiliary(K-1), dyeing experiment was done at the various dyeing conditions and the effects of auxiliary on the dyeing properties of acid milling dye for the silk fiber were dicussed. The results obtained were as follows; 1. The exhaust rate of acid milling dye was increased according to the auxiliary concentration at dyebath pH 7, But the increasing tendency of exhaust rate was decreased above auxiliary concentration 3% o. w. f.. 2. It was the same tendency of exhaust rate at dyebath pH 5, but the diffusion was more powerful at dyebath pH 7 than pH 5. 3. The decreasing ratio of exhaust rate according to dye concentration increasing was lower at auxiliary addition than auxiliary non-addition. 4. The exhaust rate curve according to increasing dyeing temperature showed the inflection point at auxiliary non-addition, but it was not observed in auxiliary addition. Consequently, it seems to be avoid that the occurrence of uneven dyeing at auxiliary addition.

• Journal of Powder Materials
• /
• v.11 no.6 s.47
• /
• pp.477-485
• /
• 2004

Monodispersed flaky silver powder was obtained by controlling the ratios of $H_{2}O_{2}/NH_{3}$ and Agin in a mixed solution of ethylene glycol and ammonia with an addition of PVP. The effects of $NH_{3}/Ag,\; H_{2}O_{2}/Ag\;and\;H_{2}PtCl_{6}/Ag$ on its morphology and size were investigated. In $H_{2}O_{2}-NH_{3}-AgNO_{3}\;system,\;NH_{3}/Ag$ molar ratio was found to be an important reaction factor for the nucleation and crystal growth of Ag powder. The synthesis of flaky powder was optimized at over 6 of $NH_{3}/Ag \;and\;5\;of\;H_{2}O_{2}/Ag\;under\;1.0{\times}10^{-3}\;of\;Pt/Ag.\;Moreover,\;as\;the\; NH_{3}/Ag$ molar ratio increased, the size of precipitates was increased regardless of the amount of Pt. In the absence of $H_{2}PtCI$, the morphology and size of reduced Ag powder were found to be irregular in shape $2-4{\mu}m$ in diameter. However, homogenized fine Ag powder was obtained due to heterogeneous nucleation when $H_{2}PtCI$ used as a cat-alyst, and flaky one was synthesized with the addition of Pt over $1.0{\times}10^{-3}$ of Pt/Ag.