• Title/Summary/Keyword: $Fe_3O_4$ concentration

Search Result 370, Processing Time 0.151 seconds

Occurrence and Species of Arsenic in the Groundwater of Ulsan Area (울산지역 지하수중 비소의 산출 및 존재형태)

  • Yun Uk;Cho Byong-Wook;Sung Kyu-Youl
    • Economic and Environmental Geology
    • /
    • v.37 no.6 s.169
    • /
    • pp.657-667
    • /
    • 2004
  • Arsenic was detected in the 29 water samples out of the 46 groundwaters located in the Ulsan metropolitan area and it's concentration ranges from $<0.1\;to\;72{\mu}g/L$. Among them the arsenic concentrations of three samples are over domestic drinking-water requirements $(50{\mu}g/L)$, and those of 10 samples are more than WHO MCLs, $10{\mu}g/L.$. High arsenic groundwater were recognized in the two region; one was near the tectonic line, especially Ulsan iron mine at Dalcheunri and the other was around Hyomundong distributed Jeongia conglomerate. It is estimated that the former is originated from pyrite oxydation type, oxygenated redox, whilst the latter is resulted from oxidation of reducted FeOOH. The species of arsenic in groundwater is in pentavalent arsenic, $H_2AsO_4^-,\;HAsO4_^{-2}$ near tectonic line, and trivalent arsenic, $H_3AsO_3$ around Hyomundong.

Study on the Characteristics of Dalgi Mineral Water in Cheongsong (청송 달기약수의 수질특성에 관한 연구)

  • Lee, Sung-Ho
    • Journal of the Korean Chemical Society
    • /
    • v.44 no.3
    • /
    • pp.220-228
    • /
    • 2000
  • This study deals with the water qualities of Dalgi mineral spring in Cheongsong district.Water samples which were taken from upper, middle and bottorn spring sites were tested for twenty eight important water quality items including minerals, essential and/or toxic trace elements, and the analytical items to affect the taste of mineral water, seasonally from May 1999 to February 2000 The results obtained wereas follows:Each spring site showed much difference in major items. Bottom spring water showed higher value of Mg and Na than others. Middle spring water showed the highest value in all of the items except Mg and Na. The concentration of Hardness, Fe and Mn in mineral water were over than the normal standard for drinking water, but these items are not specified for the mineral water. As, Cd, $Cr^{6+}$ and Hg were not found and Pb was found ln trace level. All of the items proved nearly constant during the four seasons except water temperature. The contribution of mineral water to the nutrition of human was calculated in order to investigate the health effect of drinking water on the bases of Required Daily Allowance,one liter of water drinking and the mineral concentration of the bottom spring. The percentage of consumable minerals of Ca, Mg, Na, K, Mn,Zn and Fe were 35.05,36.43,5.88∼10.63,0.19∼0.57,21.86∼43.72,0.65, and 95.l respectively. This means Dalgl mineral water is pIenty of iron mineral. The K and O indexes of mineraI water appeared to be good for healthy and delicious water.

  • PDF

Preparation and Characterization of Acrylic Acid Grafted Polypropylene Nonwoven Fabric (아크릴산 그라프트 폴리프로필렌 부직포의 제조와 특성)

  • Kim, Sang-Yool;Na, Choon-Ki
    • Fashion & Textile Research Journal
    • /
    • v.6 no.3
    • /
    • pp.384-392
    • /
    • 2004
  • The purpose of this study is in development of effective filter-type polymer adsorbent for removal of pollutants from wastewater by UV irradiation graft polymerization. Photografting of acrylic acid (AA) on polypropylene (PP) nonwoven fabric using benzophenone (BP) as a photosensitizer was investigated. Inhibition of homopolymerization was achieved by adding various concentrations of $FeSO_4{\cdot}7H_2O$, $CuSO_4{\cdot}5H_2O$ and Mohr's salt. As AA concentration was increased, the degree of grafting was increased as to a specific value and then decreased, and the effect of BP concentration showed the same tendency. It was also found that the degree of grafting increased with reaction time and reaction temperature. Addition of the polyfunctional monomers and $H_2SO_4$ to the grafting system accelerated the photografting. The melting temperature, molecular weight and breaking stress and breaking strain were decreased with the increase in the degree of grafting.

Preparation and Characteristics of Polypropylene Nonwoven Fabric Grafted by Styrene (스티렌 그라프트 폴리프로필렌 부직포의 제조와 특성)

  • Kim, Sang-Yool;Na, Choon-Ki
    • Fashion & Textile Research Journal
    • /
    • v.6 no.3
    • /
    • pp.377-383
    • /
    • 2004
  • Photografting of styrene (St) on polypropylene (PP) nonwoven fabric using benzoin ethyl ether (BEE) as a photosensitizer was investigated. Inhibition of homopolymerization was achieved by adding various concentrations of $FeSO_4{\cdot}7H_2O$, $CuSO_4{\cdot}5H_2O$ and Mohr's salt. As St concentration was increased, the degree of grafting was increased as to a specific value and then decreased, and the effect of BEE concentration showed the same tendency. It was also found that the degree of grafting increased with reaction time and reaction temperature. Addition of the polyfunctional monomers and $H_2SO_4$ to the grafting system accelerated the photografting. The melting temperature, molecular weight, tensile strength and elongation were decreased with the increase in the degree of grafting.

Effect of Nitrification Inhibition on Soil Phosphate Release and Nutrient Absorption and Growth of Rice Plant (질산화작용 억제 처리가 논토양의 인산 가용화와 벼의 양분흡수 및 생육에 미치는 영향)

  • Chung, Jong-Bae;Kim, Byoung-Ho
    • Korean Journal of Environmental Agriculture
    • /
    • v.29 no.4
    • /
    • pp.336-342
    • /
    • 2010
  • In a pot experiment, we studied the effect of nitrification inhibition on Fe reduction and P release in paddy soil and growth and nutrient uptake of rice plant. Recommended level of fertilizers, 6 kg N, 5 kg $P_2O_5$ and 4 kg $K_2O$ per 10a, were applied, and for N fertilizer urea, urea+N-serve, and $KNO_3$ were included. Four 30-day-old seedlings were transplanted in a waterlogged 9 L pot filled with Yuga series soil, and 3 pots were prepared in each N fertilizer treatment. Changes of soil redox potential and concentration of ${NH_4}^-$, ${NO_3}^-$, $Fe^{2+}$ and ${PO_4}^{3-}$ in soil solution at 10 cm depth were monitored, and also the growth and nutrient uptake of rice plants were measured. Concentration of ${NH_4}^+$ in soil solution was highest in urea+N-serve treatment, and followed by urea and $KNO_3$ treatments. Addition of N-serve could effectively inhibit nitrification in the soil. In the treatment of $KNO_3$, relatively higher ${NO_3}^-$ concentration was found at 10 cm depth soil. In urea+N-serve treatment redox potential was lower than -100 mV during the experiment, but in the treatment of $KNO_3$ the potential was maintained above 0 mV until ${NO_3}^-$ remaining in soil solution. Reduction of Fe(III) and solubilization of P were highly correlated with redox potential changes in the three N fertilizer treatments. Concentrations of Fe(II) and ${PO_4}^{3-}$ in soil solution at 10 cm depth were much higher in the urea+N-serve treatment. The most vigorous rice seedling growth was found in the urea treatment. Although the availability of N and P in soil was enhanced in the urea+N-serve treatment through the suppression of nitrification, excessive solubilization of Fe could limit the growth of rice plants.

Airborne Concentrations of Welding Fume and Metal Components by Type of Welding (용접작업 형태별 공기중 용접흄 농도와 금속 성분에 관한 조사연구)

  • Lee, Kwon Sup;Paik, Nam Won
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.4 no.1
    • /
    • pp.71-80
    • /
    • 1994
  • This study was conducted to evaluate worker exposure to welding fume in automobile body shop and to evaluate metal components by type of welding. The results are summarized as follows: 1. Average concentrations of total welding fume without and with ventilation were $5.2mg/m^3$ and $2.49mg/m^3$, respectively. Thus, the average reduction rate of total fume by ventilation was 52.1 %. 2. The highest fume concentration was indicated at shielded arc welding, followed by $CO_2$ gas welding, argon arc welding, and spot welding in order of decreasing concentration. 3. Average respirable fume concentrations without and with ventilation were $2.97mg/m^3$ and $1.64mg/m^3$, respectively. 4. Further analysis of welding fume indicated that total fume consisted of $Fe_2O_3$, ZnO, Mn, Pb, and CuO, in order of decreasing amount. Combined effect of metals was below the American Conference of Governmental Industrial Hygienists (ACGIH)Threshold Limit Values (TLVs).

  • PDF

Enhanced photocatalytic oxidation of humic acids using Fe3+-Zn2+ co-doped TiO2: The effects of ions in aqueous solutions

  • Yuan, Rongfang;Liu, Dan;Wang, Shaona;Zhou, Beihai;Ma, Fangshu
    • Environmental Engineering Research
    • /
    • v.23 no.2
    • /
    • pp.181-188
    • /
    • 2018
  • Photocatalytic oxidation in the presence of Fe-doped, Zn-doped or Fe-Zn co-doped $TiO_2$ was used to effectively decompose humic acids (HAs) in water. The highest HAs removal efficiency (65.7%) was achieved in the presence of $500^{\circ}C$ calcined 0.0010% Fe-Zn co-doped $TiO_2$ with the Fe:Zn ratio of 3:2. The initial solution pH value, inorganic cations and anions also affected the catalyst photocatalytic ability. The HAs removal for the initial pH of 2 was the highest, and for the pH of 6 was the lowest. The photocatalytic oxidation of HAs was enhanced with the increase of the $Ca^{2+}$ or $Mg^{2+}$ concentration, and reduced when concentrations of some anions increased. The inhibition order of the anions on $TiO_2$ photocatalytic activities was $CO{_3}^{2-}$ > $HCO_3{^-}$ > $Cl^-$, but a slightly promotion was achieved when $SO{_4}^{2-}$ was added. Total organic carbon (TOC) removal was used to evaluate the actual HAs mineralization degree caused by the $500^{\circ}C$ calcined 0.0010% Fe-Zn (3:2) co-doped $TiO_2$. For tap water added with HAs, the $UV_{254}$ and TOC removal rates were 57.2% and 49.9%, respectively. The $UV_{254}$ removal efficiency was higher than that of TOC because of the generation of intermediates that could significantly reduce the $UV_{254}$, but not the TOC.

Effect of Inorganic and Organic Trace Mineral Supplementation on the Performance, Carcass Characteristics, and Fecal Mineral Excretion of Phase-fed, Grow-finish Swine

  • Burkett, J.L.;Stalder, K.J.;Powers, W.J.;Bregendahl, K.;Pierce, J.L.;Baas, T.J.;Bailey, T.;Shafer, B.L.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.22 no.9
    • /
    • pp.1279-1287
    • /
    • 2009
  • Concentrated livestock production has led to soil nutrient accumulation concerns. To reduce the environmental impact, it is necessary to understand current recommended livestock feeding practices. Two experiments were conducted to compare the effects of trace mineral supplementation on performance, carcass composition, and fecal mineral excretion of phase-fed, grow-finish pigs. Crossbred pigs (Experiment 1 (Exp. 1), (n = 528); Experiment 2 (Exp. 2), (n = 560)) were housed in totally-slatted, confinement barns, blocked by weight, penned by sex, and randomly assigned to pens at approximately 18 kg BW. Treatments were allocated in a randomized complete block design (12 replicate pens per treatment) with 9 to 12 pigs per pen throughout the grow-finish period. In Exp. 1, the control diet (Io100) contained Cu as $CuSO_{4}$, Fe as $FeSO_{4}$, and Zn (of which 25% was ZnO and 75% was $ZnO_{4}$) at concentrations of 63 and 378 mg/kg, respectively. Treatment 2 (O100) contained supplemental Cu, Fe, and Zn from organic sources (Bioplex, Alltech Inc., Nicholasville, KY) at concentrations of 19, 131, and 91 mg/kg, respectively, which are the commercially recommended dietary inclusion levels for these organic trace minerals. Organic Cu, Fe, and Zn concentrations from O100 were reduced by 25% and 50% to form treatments 3 (O75) and 4 (O50-1), respectively. In Exp. 2, treatment 5 (Io25) contained 25% of the Cu, Fe, and Zn (inorganic sources) concentrations found in Io100. Treatment 6 (O50-2) was identical to the O50-1 diet from Exp. 1. Treatment 7 (O25) contained the experimental microminerals reduced by 75% from concentrations found in O100. Treatment 8 (O0) contained no trace mineral supplementation and served as a negative control for Exp. 2. In Exp. 1, tenth-rib backfat, loin muscle area and ADG did not differ (p>0.05) between treatments. Pigs fed the control diet (Io100) consumed less feed (p<0.01) compared to pigs fed diets containing organic trace minerals, thus, G:F was greater (p = 0.03). In Exp. 2, there were no differences among treatment means for loin muscle area, but pigs fed the reduced organic trace mineral diets consumed less (p<0.05) feed and tended (p = 0.10) to have less tenth-rib backfat compared to pigs fed the reduced inorganic trace mineral diet. Considering that performance and feed intake of pigs was not affected by lower dietary trace mineral inclusion, mineral excretion could be reduced during the grow-finish phase by reducing dietary trace mineral concentration.

Study on the Nicotine-Degrading Bacteria(2) -The Optimal Growth Condition of Nicotinophiles- (니코틴 분해 세균에 관한 연구(2) -니코틴 분해 세균의 최적 생장조건 연구-)

  • 강은희
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.2 no.2
    • /
    • pp.20-37
    • /
    • 1980
  • Among the 34 strains of Nicotinophiles selected in the previous experiments, strain NCT27 identified with Pseudomonas putida and strain NCT30 identified with Arthrobacter oxydans biotype nan thus were Investigated for optimization of growth conditions for nicotine degradation and other cultural characteristics. The compositions of optimized medium were to be following: $KH_2PO_4$ 2.Ogr, KCI 5.Ogr, $MgSO_4$.$7H_2O$ 20mg, $MnSO_4$.$6H_2O$ 0.2mg, $FeSO_4$.$7H_2O$ 1.Omg, Col$^{++}$ (Cobalt Acetate),2.O$\gamma$, N1$^{++}$ (NiSO4,6H2O) 0.5$\gamma$, and yeast extract 80mg per liter. The optimum initial concentrations of nicotine for growth were 0.4% for Pseudomonas and 0.1% for Arthrobacter, respectively. The optimum temperature and pH were 3$0^{\circ}C$ and 7.0 for both of strains. The pH of culture medium of Pseudomonas was changed from acidic condition to basic one in going from the logarithmic growth phase to the stationary growth phase. In contrast with Pseudomonas, it remained constant in case of Arthrobacter. The growth of Arthrobacter was completely inhibited in the nicotine concentration of 0.7&. However, Pseudomonas could grow even in the nicotine concentration of 1.0%. Moreover, it could grow successfully in the tobacco extract media as well as media containing carbon and nitrogen sources other than nicotine. The maximum rates of nicotine degradation were to be 1.22 gr./hr./liter for Pseudomonas and 0.186 gr./hr./liter for Arthrobacter, respectively.

  • PDF

A Novel Iron(III) Selective Membrane Electrode Containing a Tripodal Polycatacholamine as Sensor

  • Bera, Rati Kanta;Sahoo, Suban K;Baral, Minati;Kanungo, B.K.
    • Bulletin of the Korean Chemical Society
    • /
    • v.32 no.10
    • /
    • pp.3592-3596
    • /
    • 2011
  • A novel poly(vinylchloride)-based membrane sensor using $N^1$,$N^3$,$N^5$-tris(2-(2,3-dihydroxybenzylamino)-ethyl)cyclohexane-1,3,5-tricarboxamide (CYCOENCAT, L) as ionophore has been prepared and explored as $Fe^{3+}$ selective electrode. The membrane electrode composed of ionophore, poly(vinylchloride) and o-nitropheyloctyl ether in the optimum ratio 4:33:63 gave excellent potentiometric response characteristics, and displayed a linear log[$Fe^{3+}$] versus EMF response over a wide concentration range of $1.0{\times}10^{-5}-1.0{\times}10^{-1}$ M with super nernstian slope of 28.0 mV/decade and the detection limit of $8.0{\times}10^{-6}$ M. The proposed ion selective electrode showed fast response time (< 15 s), wide pH range (3.0-7.0), high non-aqueous tolerance (up to 20%) and adequate long life time (120 days). It also exhibited very good selectivity for $Fe^{3+}$ relative to a wide variety of alkali, alkaline earth, transition and heavy metal ions. Further, the analytical applicability of the sensor was tested as an indicator electrode in the potentiometric titration of $Fe^{3+}$ with EDTA.