• 제목/요약/키워드: $FeCl_3 $

검색결과 921건 처리시간 0.02초

공침법에 의한 Fe2O3-CoO-Cr2O3-MnO2계 안료 연구 (Synthesis of the Fe2O3-CoO-Cr2O3-MnO2 pigments by co-precipitation method)

  • 최수녕;이병하
    • 한국결정성장학회지
    • /
    • 제17권6호
    • /
    • pp.264-271
    • /
    • 2007
  • 본 연구에서는 $Fe_2O_3-CoO-Cr_2O_3-MnO_2$계 색상의 무기안료를 공침법을 사용하여 합성하였다. 출발원료로는 $FeCl_3,\;CoCl_2,\;CrCl_3,\;MnCl_2$를 사용하였으며 침전제로는 2N-KOH를 사용하였다. $MnCl_2$는 10 mole%로 고정한 후 세 가지 원료로서 6가지 조성비를 만들어 안료를 합성하였다. 조합된 시료는 1.5시간 $1350^{\circ}C$에서 하소하였다. XRD, FT-IR, SEM 과 UV spectrophotometer를 사용하여 안료의 특성 분석을 하였다. 합성된 안료는 석회유, 석회 바륨유에 각각 6wt%씩 첨가하여 $1260^{\circ}C$ 산화소성, $1240^{\circ}C$ 환원 소성하였다. UV Spectrometer를 사용하여 색상분석을 한 결과는 black, bluish black, dark grayish green을 나타냈다.

H2O2/SiO2-FeCl3 계를 이용한 Benzimidazoles의 효율적인 합성 (An Efficient Procedure for the Synthesis of Benzimidazoles Using H2O2/SiO2-FeCl3 System)

  • Fazlinia, Abbas;Mosslemin, Mohammad Hossein;Sadoughi, Hesamaddin
    • 대한화학회지
    • /
    • 제54권5호
    • /
    • pp.579-581
    • /
    • 2010
  • Solid silica supported ferric chloride ($SiO_2-FeCl_3$) 촉매를 이용하여 다양한 benzimidazoles의 one-step 합성을 수행하였으며, 합성 방법이 간단하며, 화합물의 분리가 용이하며, 반응시간이 짧다.

정수처리 응집효율 개선을 위한 Al(III)염과 Fe(III)염 응집제의 비교 (Comparison of Al(III) and Fe(III) Coagulants for Improving Coagulation Effectiveness in Water Treatment)

  • 한승우;강임석
    • 대한환경공학회지
    • /
    • 제37권6호
    • /
    • pp.325-331
    • /
    • 2015
  • 낙동강 하류부의 상수원수를 대상으로 Al(III)염과 Fe(III)염계 응집제를 이용한 응집제의 특성 실험 결과, alum과 $FeCl_3$의 경우는 모노머성 화학종이 각각 98%와 93.3%로 응집제내에 함유된 주된 가수분해종은 모노머성 화학종임을 알 수 있었다. 염기를 첨가하여 제조한 염기 첨가비 r=1.2인 PACl의 경우 폴리머성 Al(III)종은 31.2%이었으며, r=2.2인 PACl의 경우 함유된 폴리머성 Al(III)종은 85.0%로 r 값이 증가함에 따라 더 많은 폴리머성 Al(III)종이 함유되어 있는 것으로 나타났다. 응집제별 응집실험 결과, 원수의 탁도가 높고 낮음에 관계없이 응집제별 탁도 및 유기물 제거정도는 $FeCl_3$ > PACl (r=2.2) > PACl(r=1.2) > alum의 순으로 나타났다. Al(III)계 응집제 보다 $FeCl_3$의 경우 응집효율이 우수한 것으로 나타났다. 그리고 Al(III)계 응집제의 경우 염기도가 높은 응집제의 경우 polymeric Al(III)종을 많이 함유함에 따라 응집효율이 향상됨에 따라 염기도가 높은 응집제일수록 응집효율이 높은 것으로 나타났다. 실험에 적용된 응집 pH 범위(pH 4.0~9.5)에서 모든 응집제의 최적 응집 pH는 약 7.0으로 나타났다. 특히 고염기도 PACl (r=2.2)과 $FeCl_3$의 경우 pH 7.0 이상에서도 높은 탁도 응집효율을 유지하였다. 따라서 pH가 높은 상수원수의 경우 탁도 제거에서는 고염기도 PACl이나 $FeCl_3$ 응집제가 더 적합한 것으로 판단된다.

Removal characteristics of organic matter during pretreatment for membrane-based food processing wastewater reclamation

  • Jang, Haenam;Lee, Wontae
    • Membrane and Water Treatment
    • /
    • 제9권4호
    • /
    • pp.205-210
    • /
    • 2018
  • In this study, we investigated coagulants such as polyaluminum chloride (PACl) and ferric chloride ($FeCl_3$) and the combination of a coagulant and powdered activated carbon (PAC) for the removal of dissolved organic matter (DOM) from fish processing effluent to reduce membrane fouling in microfiltration. The efficiency of each pretreatment was investigated through analyses of dissolved organic carbon (DOC) and ultraviolet absorbance at 254 nm ($UVA_{254}$). Membrane flux and silt density index (SDI) analyses were performed to evaluate membrane fouling; molecular weight distributions (MWD) and fluorescence excitation-emission matrix (FEEM) spectroscopy were analyzed to assess DOM characteristics. The results demonstrated that $FeCl_3$ exhibited higher DOC and $UVA_{254}$ removals than PACl for food processing effluent and a combination of $FeCl_3$ and PAC provided comparatively better results than simple $FeCl_3$ coagulation for the removal of DOM from fish processing effluent. This study suggests that membrane fouling could be minimized by proper pretreatment of food processing effluent using a combination of coagulation ($FeCl_3$) and adsorption (PAC). Analyses of MWD and FEEM revealed that the combination of $FeCl_3$ and PAC was more efficient at removing hydrophobic and small-sized DOM.

유동법에 의한 용융 ZnCl2 및 FeCl2의 증기압 측정 (Measurement of Vapor Pressure of Molten ZnCl2 and FeCl2 by the Transpiration Method)

  • 이우상;김원용;정우광
    • 한국재료학회지
    • /
    • 제20권3호
    • /
    • pp.111-116
    • /
    • 2010
  • Chloride-based fluxes such as NaCl-KCl are used in the refining of Al melt. The vapor pressure of the chloride is one of the fundamental pieces of information required for such processes, and is generally high at elevated temperatures. In order to measure the vapor pressure for chlorides, the apparatus for the transpiration method was assembled in the present study. The vapor pressure of $ZnCl_2$ and $FeCl_2$, which is related with the process of aluminum refining and the recovery of useful elements from iron and steel industry by-products, was also measured. In the measurement of vapor pressure by the transpiration method, the powder of $ZnCl_2$ or $FeCl_2$ in a alumina boat was loaded in the uniform zone of the furnace with a stream of Ar. The weight loss of $ZnCl_2$ and $FeCl_2$ after holding was measured by changing the flow rate of Ar gas (10 sccm -230 sccm), and the partial pressures of $ZnCl_2$ and $FeCl_2$ were calculated. The partial pressures within a certain range were found to be independent of the flow rate of Ar at different temperatures. The vapor pressures were measured in the temperature range of 758-901K for $ZnCl_2$ and 963-983K for $FeCl_2$. The measured results agreed well with those in the literature.

염화철 처리 활성탄에 의한 질산염 제거 (Nitrate Removal by $FeCl_3$-Treated Activated Carbon)

  • 정경훈;최형일;정오진
    • 한국환경보건학회지
    • /
    • 제27권1호
    • /
    • pp.63-68
    • /
    • 2001
  • A laboratory experiment was performed to invstigate the nitrate removal using FeCl$_3$ -treated activated carbon. Iron chloride(III) was coated onto the surface of activated carbon. The removal efficiency of nitrate was increased with increasing of FeCl$_3$ was used for coating material. About 22~26mg of Fe per unit g of activated carbon was adsorbed. The nitrate removal was not affected by the pH under the experiment range of pH, but the pH value in solution decrease to 3.5~4.0 after reaction. The removal efficiency of nitrate was increased with increasing of dosage of adsorbents. Ammonia was not detected and the Fe concentration as low as 0.22mg/$\ell$ was desorbed from the adsorbents. The adsorbents was regenerated using KCl solution, and recovery was 76.6% at 1 M of KCl. The adsorption of nitrate by FeCl$_3$-treated activated carbon followed the Freundlich isotherm equation and the Freundlich constant, 1/n, was 0.346. These results showed that the FeCl$_3$-treated activated carbon could serve as the basis of a useful nitrate removal.

  • PDF

$[FeH(NCCH_2CH_2CH_2Cl)(dppe)_2]^+[BF_4]^- $착물의 합성 및 구조 (Synthesis and Structure of trans$[FeH(NCCH_2CH_2CH_2Cl)(dppe)_2]^+[BF_4]^-$)

  • 이재경;이순원
    • 한국결정학회지
    • /
    • 제9권2호
    • /
    • pp.107-113
    • /
    • 1998
  • Ar하에서 trans-FeHCl(dppe)2, 1을 4-chlorobutyronitrile에 녹이면, 착물 trans-[FeH(NCCH2CH2CH2Cl)(dppe)2]Cl, 2가 생성되고, 2는 NaBF4와 반응하여 착물 trans-[FeH(NCCH2CH2CH2Cl)(dppe)2][BF4], 3로 변환된다. 착물 3의 결정학 자료: 단사정계 공간군 P21/c, a=13.540(2) , b=17.058(3) , c=21.853(4) , β=90.15(1)o, Z=4, R(wR2)=0.0524(0.1239).

  • PDF

양전자 방출핵종 $^{68}$Ga을 이용한 NOTA와 DOTA의 표지 및 시험관내 특성 연구 (Radiolabeling of NOTA and DOTA with Positron Emitting $^{68}$Ga and Investigation of In Vitro Properties)

  • 정재민;김영주;이윤상;이동수;정준기;이명철
    • Nuclear Medicine and Molecular Imaging
    • /
    • 제43권4호
    • /
    • pp.330-336
    • /
    • 2009
  • 목적: $^{68}$Ge/$^{68}$Ga-제너레이터에서 생산되는 PET용 방사성동위원소인 $^{68}$Ga을 NOTA와 DOTA에 표지하는 조건을 확립하고 이의 안정성 및 단백질 결합 특성을 연구하였고, 여러 가지의 금속이온 공존시 표지효율에 미치는 영향도 관찰하였다. 대상 및 방법: 여러 가지 농도의 NOTA 3HCl과 DOTA 4HCl에 $^{68}$Ge/$^{68}$Ga-제너레이터에서 0.1 M HCl로 용출한 $^{68}$GaCl$_3$ 6.66$\sim$272.8 MBq 1.0 mL와 합치고 초산나트륨 또는 탄산나트륨 완충액을 사용하여 다양한 pH 조건에서 반응하였다. 다양한 금속이온(CuCl$_2$, FeCl$_2$, InCl$_3$, FeCl$_3$), GaCl$_3$, MgCl$_2$, CaCl$_2$)과 0.373 mM NOTA를 $^{68}$Ga(6.77$\sim$8.58 MBq)으로 표지할 때 표지효율을 관찰하였다. $^{68}$Ga의 표지효율은 ITLC-SG고정상으로 하고 아세톤과 생리식염수를 이동상으로 하여 측정하였다. 최적의 pH 조건에서 $^{68}$Ga-NOTA와 $^{68}$Ga-DOTA를 표지한 후 4 시간 동안 안정성을 확인하고, 사람 혈청에서의 단백질 결합능을 평가하였으며, 지용성 정도를 측정하기 위하여 octhanol distribulion 실험을 실시하여 log P값을 구하였다. 결과: $^{68}$Ga-NOTA와 $^{68}$Ga-DOTA의 치적 표지 pH 조건은 각각 pH 6.5와 3.5였고, NOTA는 실온에서 표지가 잘 되었으나 DOTA는 가열이 필요하였다. MgCl$_2$와 CaCl$_2$의 존재는 $^{68}$Ga-NOTA의 표지 효율에 영향을 미치지 않았으나 CuCl$_2$, FeCl$_2$, InCl$_3$, FeCl$_3$, GaCl$_3$이 존재할 경우에는 표지효율이 감소하였다. $^{68}$Ga-NOTA와 $^{68}$Ga-DOTA는 실온에 그대로 두거나 사람혈청과 37$^{\circ}C$에 두었을 때 4 시간 이상 안정하였고, 사람 혈청 단백질 결합능은 2.04$\sim$3.32%로 낮았으며, log P 값은 -3.07로 수용성을 보였다. 결론: $^{68}$Ga의 표지에는 NOTA가 DOTA에 비하여 이상적인 양기능성 킬레이트제로 쓰일 수 있음을 알았다. 또한 $^{68}$Ga-NOTA는 금속이온 존재시 표지효율이 떨어질 수 있지만 안정하고 낮은 단백질 결합을 보였다.

Synthesis of m-Oxo and Bis( m-alkoxo) Bridged Diiron(III) Complexes Using a Tripodal Ligand, Bis(2-benzimidazolylmethy)ethanolamine

  • 곽병훈;이명수
    • Bulletin of the Korean Chemical Society
    • /
    • 제21권1호
    • /
    • pp.65-68
    • /
    • 2000
  • A $\mu-oxo$ diiron(III) complex and two bis( $\mu-alkoxo)$ diiron(III) complexes with biomimetic tripodal ligand containing mixed N/O donor atoms were synthesized using a mononuclear iron(III) complex as starting material. Depending on the amounts and kinds of bases used, we obtained various kinds of diiron (III) complexes. The reaction of $[$Fe^{III}$(Hbbea)Cl_2]Cl$, 1, with an equivalent amount of $KO_2$ or NaOAc produced $[$Fe^{III}$_2O(Hb-bea)_2Cl_2]Cl_2$, 2. An additional equivalent amount of NaOBz or NaOAc converts complex 2 to complex 3 or complex 4 depending on the base used. The addition of two equivalent amounts of NaOBz orNaOAc directly converts complex 1 to $[$Fe^{III}$_2(bbea)_2(OBz)_2]Cl_2$, 3, or $[$Fe^{III}$_2(bbea)_2(OAc)_2]Cl_2$, 4, depending on the base used. Crystal data are as follows: [$Fe^{III}_2O(Hbbea)_2Cl_2]Cl_2$, 2: monoclinic space group $$P2_1/n$$, a = 8.421 (1) $\AA$, b = 18.416 (2) $\AA$, c = 13.736 (1) $\AA$, $\beta$ = 104.870 $(7)^{\circ}$, V = 2058.9 (4) $\AA^3$, Z = 2, R1 = 0.0469 and wR2 = 0.1201 for reflections with I > 2 ${\sigma}$(I).