• Journal of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.194-200
• /
• 1983

Effect of metallic salts added to the ${\alpha}-Fe_2O_3-HCl\;or\;{\alpha}-Fe_2O_3-H_2SO_4$ reaction systems were investigated by colorimetric and gravimetric determinations. While reductive salts exhibited remarkably enhanced reaction rate, non-reductive salts showed inhibitive results. We supposed that the improvement of dissolution rate of ${\alpha}-Fe_2O_3$ by the addition of $FeCl_2$, a reductive salt, to the ${\alpha}-Fe_2O_3-HCl$ system can be attributed to the formation of chloro-bridge between $Fe^{3+}\;and\; Fe^{2+}$, and therefore some partial electronic charge transfer from $Fe^{2+}\;to\;Fe^{3+}$ on the surface of ${\alpha}-Fe_2O_3$ will be easily achieved through the bridged bond. The transferred charge to the surface will reduce the positive charge of initial $Fe^{3+}$, and also result to reduce the lattice energy of that site. Assuming tothat there is a linear relationship between the lattice energy change and the change of activation energy of the reaction system, the transferred partial electronic charge to $Fe^{3+}$ of ${\alpha}-Fe_2O_3$ surface was calculated to be ca. 0.36e.

• Resources Recycling
• /
• v.14 no.3
• /
• pp.48-54
• /
• 2005

Solvent extraction and chemical reduction experiments have been performed to separate iron and nickel from a spent FeCl$_3$ etching solution and to recover nickel metal. It was possible to separate iron and nickel by extracting the spent solution with Alamine336. At the O/A ratio of 7:1, iron extraction percentage of 99% was obtained. In the stripping of the loaded organic with 0.01 M HCl solution, iron stripping percentage of 99% was obtained when the A/O ratio was 7:1. When the pH of the raffinate was controlled to be 10.5, nickel metal powder with 99% purity was obtained by using hydrazine as a reducing agent at 100$^{\circ}C$. A process was suggested to recover nickel metal from the spent FeCl$_3$ solution and to regenerate etching solution.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.246-248
• /
• 2022

커피박을 FeCl₃·6H₂O, MgCl₂·6H₂O 및 AlCl₃·6H₂O 용액으로 전처리하여 제조한 커피박 바이오차 복합재 중에서 MgCl₂·6H₂O 용액으로 전처리하여 제조한 바이오차 복합재가 인산염에 대한 가장 큰 제거율을 나타내었다. 커피박 바이오차 복합재의 인산염에 대한 제거율을 높이기 위해서는 FeCl₃·6H₂O 또는 MgCl₂·6H₂O 용액의 농도를 0.5 M 이상에서 커피박을 전처리 하여야 한다.

• Journal of Environmental Health Sciences
• /
• v.17 no.1
• /
• pp.74-78
• /
• 1991

This study was performed to investigate the effect of heavy metals and CN on BOD$_{5}$ measurement. The results were as follows: 1. The BOD$_{5}$ value decreased 20% in Cd(CdCl$_{2}$) 3.0mg/l, Ni(NiCl$_{2}$) 7.0mg/l, Cu(CuCl$_{2}$) 0.5mg/l, Pb($Pb(NO_{3})_{2}$) 9.0mg/l, Cr($K_{2}Cr_{2}O_{7}$) 1.0mg/l respectively. 2. The BOD$_{5}$ value decreased 10% in Zn($Zn(NO_{3})_{2}$) 5 mg/l, Fe(FeCl$_{3}$) 20mg, /l, and 25% in CN(KCN) 5mg/l, and 40% in Hg(HgCl$_{2}$) 0.2rng/l. 3. In Comparion with BOD Rapid Analyzer, the above mentioned heavy metals concentrations have no effect on BOD$_{5}$ value of that analyzer except CN.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.77-85
• /
• 2012

The present study investigates treatment methods for removal of arsenic from wastewater. The granular activated carbon (GAC) with the coating of iron chloride ($FeCl_3$) was used for the treatment of a low concentration of arsenic from wastewater. Batch experiments were performed to investigate the synthesis of Fe-GAC (Iron coated granular activated carbon), effects of pH, adsorption kinetics and the Langmuir model. The synthesized Fe-GAC with 0.1 M $FeCl_3$ shows best removal efficiency. Adsorption studies were carried out in the optimum pH range of 4-6 for arsenic removal. The Fe-GAC showed promising results by removing 99.4% of arsenic. In the adsorption isotherm studies, the observed data fitted well with the Langmuir models. In continuous column study showed that As(V) could be removed to below 0.25 mg/L within 1,020 pore volume. Our results suggest that the surface modified granular activated carbon treated with $FeCl_3$ for effective removal of arsenic from wastewater.

• Journal of the Korean Ceramic Society
• /
• v.28 no.3
• /
• pp.225-233
• /
• 1991

In this study, we tried to find out the appropriate synthetic condition and magnetic properties of Ni-Zn ferrite {(NixZn1-x)Fe2O4} powders (where X=0, 0.1, 0.2, 0.3, ……0.9, 1). Ferrite powders were prepared by wet-direct method at 86℃ for 6hrs from FeCl36H2O, NiCl26H2O, and ZnCl2. The powders of (NixZn1-x)Fe2O4 (where X=0.4, 0.5, 0.6) have a good crystallinity, but the other ferrite powders consist of crystal and precursor ferrite. The ferrite powder's lattice constant is increased when ratio of ZnO contant is increased in the ferrite composition. And initial permeability was measured after sintering, result indicated regular pattern except (Ni0.4Zn0.6)Fe2O4 when the frequency were changed 10KHz to 10MHz.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.1
• /
• pp.18-26
• /
• 2017

In a previous study, we assessed the feasibility of ferric chloride ($FeCl_3$) as a washing agent in bench-scale in-situ soil washing to remove Pb from agricultural paddy soil. Herein is a subsequent study to evaluate variations in soil properties after $FeCl_3$ soil washing in terms of fractionation and bioavailability of Pb and chemical properties of the soil. After soil washing, the soil pH decreased from 4.8 to 2.6 and the exchangeable fractions of Pb in the soil increased from 12 mg/kg to 15 mg/kg. Variations in the Pb fractionation of the soil increased Pb bioavailability by almost three-fold; however,the base saturation decreased by 75%. The concentrations of total nitrogen and available phosphate were similar before and after soil washing. The available silicate concentration significantly increased after soil washing but was two times lower than that of soil washed with HCl, which is widely used as a washing agent. This indicates that $FeCl_3$ can be an acceptable washing agent that protects the soil clay structure. The results suggest that soil amendment, such as liming, is needed to recover soil pH, reduce mobility of Pb, and provide exchangeable bases of Ca, Mg, and K as essential elements for the healthy growth of rice plants in reused soil that has been washed.

• Korean Journal of Clinical Laboratory Science
• /
• v.43 no.4
• /
• pp.179-187
• /
• 2011

Animal models are important tools in thrombosis research and preclinical drug development. In recent studies, ferric chloride ($FeCl_3$) has been widely used to induce arterial thrombosis in a variety of species. The purpose of this study was to find an optimal concentration of $FeCl_3$ and validate this model suited better for thrombosis research. A small piece of filter paper, soaked in $FeCl_3$ solution (10, 20 or 35%, v/v, in distilled water) was topically applied on the carotid artery of SD rats to measure the time to occlusion (TTO) and thrombus weight (TW) to ascertain 35%, as an optimal $FeCl_3$ concentration ($8.63{\pm}0.92min$; p =0.000, $0.79{\pm}0.03mg/mm$; p =0.000, respectively). To validate this experimental model, Ginkgo biloba special extract EGb761 (5, 10 or 30 mg/kg) as a reference agent administered by peritoneal route for 1h prior to the induction of thrombosis, showed significantly delayed TTO in a dose dependent manner ($18.50{\pm}2.17$, $29.17{\pm}1.83$, and $38.00{\pm}1.79min$, respectively) and significantly reduced TW and repaired collagen fibre in the injured vessel compare to vehicle group. Our results provide a simple, reproducible and well controlled in vivo screening system to induce thrombosis in rats by the topical application of 35% $FeCl_3$ to assess the efficacy of the new anti-thrombotic agents.

• Journal of Nutrition and Health
• /
• v.17 no.1
• /
• pp.31-40
• /
• 1984

A new microassay was proposed for the determination of serum thiobarbituric acid(TBA) value greatly enhanced by ferric ion under anaerobic condition. One ${\mu}mole$ of $FeCl_{3}$ per $10{\mu}l$ of serum was added to the TBA reaction mixture containing serum protein precipitate. The reaction mixture was heated on boiling water-bath for 50min under $N_{2}$ flushing. The sensitivity of this assay was greatly enhanced by 40 times comparing with that of Yagi's method (1976). In favour of the enhancement, this test could be measured by colorimetry or spectrophotometry with the sample size of $10-20{\mu}l$ serum. The sensitivity and reproducibility were also improved by means of partial dehydration of the butanol extract with $(NH_{4})_{2}SO_{4}$ salting-out. Serum TBA values of healthy human at different age groups were determined by this proposed method.

• Korean Chemical Engineering Research
• /
• v.44 no.3
• /
• pp.259-264
• /
• 2006

The separation and purification of $TaCl_5$is indispensable in the synthetic process of $TaCl_5$by chlorination of tantalum oxide. The reaction products are mainly $TaCl_5$, $NbCl_5$, $TiCl_4$ and $FeCl_2$. However, we need to separate $TaCl_5/NbCl_5$ mixture from the reaction product, because $TaCl_5$ and $NbCl_5$ are easily separated each other by distillation or hydrogen reduction process. In this work, a comparison study was carried out between direct sequence and indirect sequence to obtain $TaCl_5/NbCl_5$ mixture from the reaction product by removing light component, $TiCl_4$ and heavy component, $FeCl_2$ using two distillation columns. It was concluded that the direct sequence gave better results than indirect sequence in the aspect of initial capital costs and the associative operating costs.