• Journal of Korean Society on Water Environment
• /
• v.22 no.4
• /
• pp.687-694
• /
• 2006

Dewatering sludge using inorganic chemicals with polymer has been evaded for reuse on account of the risks of high heavy metals contained and soil acidification. Composting feasibility of coagulation & dewatering sludges produced from livestock waste treatment plant was investigated. The results of analysis prove that dewatering sludge is valuable matter with suitable elements for composting if high quality ferric chloride ($FeCl_3$) is used for coagulation & dewatering process. In pot-cultivation of harvestes, using effects of dewatering sludge improved with lime treatment was very effective. The results of pot-cultivation proved that harms of crops according to different acid tolerances were not detected. But it was not applied to crops with weak acid tolerance or greenhouse for free from gas damage. Also, Further studies and monitorings are necessary to use sludges because results of pot-cultivation were generated differently by characteristics of soil, nutrient demand of plants, mature degree of sludge, consecutive cultivation and etc.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.4
• /
• pp.301-307
• /
• 2018

Membrane distillation (MD) is a thermally driven desalination process with a hydrophobic membrane. MD process has been known to have a lower fouling potential compared to other pressure-based membrane desalination process (NF, RO). However, membrane fouling also occurs in MD process. In this study, the membrane fouling was observed in MD process according to the pre-treatment processes. The filtration and precipitation processes were applied as the pre-treatment to prevent the membrane fouling. The pore sizes of roughing filters were 0.4, 5, 10, 30, and $60{\mu}m$. The concentration of the coagulant was 1.2 mg/L as $FeCl_3$. The membrane fouling on MD membrane was successfully removed with both pre-treatment processes.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.530-534
• /
• 2017

Chitosan is a promising flocculant for microalgae harvesting, but its scale-up application is not economically supported yet. Low solubility of chitosan in microalgae suspension demands high dosage (as a flocculant) to destabilize the cells, and thus, increases the cost of microalgae harvesting. This study identifies efficient solvents for the chitosan, and optimizes the concentration of solvents and chitosan dose to improve the harvesting efficiency. Chitosan was dissolved in different acids, and subsequently used as a flocculant. The flocculant efficacy was measured in terms of harvesting efficiency and reduction in chemical oxygen demand (COD) of the microalgae suspension. It was found that chitosan dissolved in 0.05 M HCl showed the highest harvesting efficiency ($89{\pm}0.87%$) at only 30 mg/L of dosage. In comparison, 270 mg/L of $FeCl_3{\cdot}6H_2O$ was required to attain $86{\pm}0.083%$ of the harvesting efficiency. $H_2SO_4$ dissolved chitosan required high flocculant dose (150 mg/L) and resulted in relatively low harvesting efficiency ($77{\pm}0.11%$). It was concluded that the efficacy of chitosan is solvent dependent, and the selection of proper solvent can decrease the dosage requirement for microalgae harvesting.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.11
• /
• pp.1513-1520
• /
• 2010

A bacterium capable of producing melanin pigment in the presence of L-tyrosine was isolated from a crop field soil sample and identified as Klebsiella sp. GSK based on morphological, biochemical, and 16S rDNA sequencing. The polymerization of this pigment occurs outside the cell wall, which has a granular structure as melanin ghosts. Chemical characterization of the pigment particles showed then to be acid resistant, alkali soluble, and insoluble in most of the organic solvents and water. The pigment got bleached when subjected to the action of oxidants as well as reductants. This pigment was precipitated with $FeCl_3$, ammoniacal silver nitrate, and potassium ferricynide. The pigment showed high absorbance in the UV region and decreased absorbance when shifted towards the visible region. The melanin pigment was further charecterized by FT-IR and EPR spectroscopies. A key enzyme, 4-hydroxyphenylacetic acid hydroxylase, that catalyzes the formation of melanin pigment by hydroxylation of L-tyrosine was detected in this bacterium. Inhibition studies with specific inhibitors, kojic acid and KCN, proved that melanin is synthesized by the DOPA-melanin pathway.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.3
• /
• pp.439-445
• /
• 2010

Pretreatment with Taraxacum Mongolicum H(TMH) prior to the administration of on $CCl_4$ significantly prevented the increased serum enzymatic activity of aminotransferase(ALT, AST), gamma-glutamyl transpeptidase(GGT) and bilirubin concentration in dose-dependent manner. In addition, pretreatment with TMH also significantly restored the elevation of hepatic malondialdehyde formation and the depletion of reduced glutathione content in the liver $CCl_4$-intoxicated rats. The restoration of microsomal aniline hydroxylase and aminopyrine N-demethylase activities indicated the improvement in functional status of endoplasmic reticulum. $CCl_4$-induced hepatotoxicity was also essentially prevented, as indicated by a liver histopathologic study. TMH showed antioxidant effects in $FeCl_2$-ascorbate-induced lipid peroxidation in rat liver homogenate and in superoxide radical scavenging activity. Our results suggest that the protective effect of TMH against $CCl_4$-induced hepatotoxicity possibly involve mechanisms related to its ability to block p450-mediated $CCl_4$ bioactivation and free radical scavenging effects.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.312-313
• /
• 2015

무전해 도금은 석출응력이 낮고 작업하기가 용이하기 때문에 산업분야에 있어서 중요한 역할을 한다. 무전해 도금 공정에 있어서, 니켈금속은 차아인산염, 아미노보레인 혹은 수소화붕소 화합물($HBF_4$)에 의한 니켈이온의 화학적 환원에 의해 도금된다. 환원반응이 진행함에 따라서 도금액 중에서 니켈과 차아인산염 이온은 감소한다. 이에 이러한 이온을 보충하기 위하여 도금액 중에 황산니켈과 차아인산나트륨이 일반적으로 첨가된다. 하지만 축적된 인산염, 황산염, 나트륨과 이외의 물질이 전착 박막의 품질을 떨어뜨리고 도금액은 폐기되기도 한다. 니켈회수 속도는 종래의 50% 이하였던 것이 90%이상으로 향상되었다. 이온교환법은 니켈도금 폐액으로부터 니켈회수에 필요한 친환경적이고 원가절감의 기술이라고 사료된다. 특히, 갈탄이 저렴하고 양이온 교환성능이 뛰어나다. 이유는 -COOH, -OH 등의 기능성 그룹을 갖기 때문이다. Fe-P 화합물은 식물에 유용하지 못하고 마그네슘과 칼슘 기반의 석출물은 저렴하고 취급이 용이하며 비료와 같이 재활용이 가능하기 때문에 일반적인 인의 제거 수단이 될 수 있다. 본고에서는 니켈도금 폐액으로부터 인을 제거하는 데 $Ca(OH)_2$, $CaCl_2$와 $CaCO_3$를 채택하여 인이 제거되는 정도를 비교하였고 니켈회수율을 높이기 위하여 갈탄을 사용하였다.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1061-1068
• /
• 1996

The conducting polymer composites were prepared by imbibing the porous particle wish the $FeCl_3$ oxidant solution, drying the imbibed porous particle, and imbibing again with pyrrole solution for polymerization to take place in the pore of porous particles. The effect of synthesis conditions on the conductivity of composite polymers were investigated. It was found that the conductivity of composite polymers was dependant on the concentration of pyrrole monomer, nature of the oxidants and solvents used for the oxidant and pyrrole, which influence the degree of penetration/distribution of polyprrole in the composite and reaction of dopant with pyrrole.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.2
• /
• pp.155-160
• /
• 2011

In these days, there are increasing demands for weight reduction in many industrial fields including marine industries. Therefore, magnesium thin films for lightweight materials were prepared on magnesium alloy substrate. The influence of gas pressure and substrate bias voltages on the crystal orientation and morphology of the films was determined by using X-ray diffraction and FE-SEM, respectively. And the effect of crystal orientation and morphology of the magnesium thin films on corrosion behavior was estimated by measuring electro-chemical anodic polarization curves in deaerated 3% NaCl solution. From the results, corrosion resistance of Mg thin films was improved by controlling the crystal orientation and morphology of the films with effective use of plasma ion plating technique.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.1 s.109
• /
• pp.38-46
• /
• 2005

This study was focused on the optimum culture condition in CMCase, FPase and xylanase activities of two fungal strains that secret extracellular enzymes for using enzymatic deinking agent to old newsprint. The results of this study were as follows. When Fusarium pallidoroseum was grown on the medium, containing of rice bran+xylan $2.0\%,\;peptone\;0.6\%,\;KH_2PO_4\;0.075\%\;and\;MnSO_4\;0.06\%\;with\;pH\;9.0,\;at\;29^{\circ}C$ for 6 days, the quantitative degree of extracellular enzyme production was the highest. Optimum culture condition for Aspergillus niger was pH 5.0, $27^{\circ}C$ incubating temperature and 7 days incubation period on liquid medium, containing of CMC+xylan $2.5\%,\;yeast\;extract\;0.4\%,\;K_3PO_4\;0.05\%\;and\;CaCl_2+FeSO_4\;0.08\%$. Aspergillus niger was fairly higher FPase and xylanase activities than Trichoderma reesei ATCC 28217.

• YAKHAK HOEJI
• /
• v.2 no.1_2
• /
• pp.11-15
• /
• 1953

Two flavons, which are a new flavon (the Authors are going to call it "CLEMATISIN") and a yellow crystalline flavon, are isolated from leaves of Clematis brachura Maxim. Clamatisin : A colorless needle crystal which has a Slightly sweet taste, mp 225 .deg.C (decomp). It is positive (Cherry red) for the Mg-HCl(Hg) reaction and is positive (purple) for the $FeCL_{3}$ reagent. It is soluble easily in methanol, ether, acetone, prydine, ethylacetate, hot water and alkali-solutions. It is soluble slightly in cold water and is insoluble in chloroform, benzene and toluence. According to the results of elementry analysis and molecular weight determination the formula of clematisin agrees with $C_{18}H_{18}O_{7}$ when dried at $80^{\circ}C$, crystalline clematisin (from water) contains one molecule of crystalline water. The following derivatives are prepared ; Clematisin-oxim; a colorless needle crystal, mp 215-216 .deg.C, Clematisin methylate; prepared by diazomethan. mp 191-$192^{\circ}C$ a colorless needle crystal. Acethylmethylate; a colorless powder, It is not sharp in melting point and melts at approximately $215^{\circ}C$, Yellow Crystalline Flavon; mp 285-$286^{\circ}C$ (dexo-mp.), yellow needle crystal. It has a slightly sweet teste and shows positive reaction Acetate; a colorless needle crystal, mp $168^{\circ}C$.