• Journal of the Korean Ceramic Society
• /
• v.19 no.3
• /
• pp.223-228
• /
• 1982

For the preparation of ferroxidure BaO.5.5 $Fe_2O_3$ with high coercive force, the green and calcined coprecipitates, which were obtained by neutralizing the mixed salt solution $FeCl_2-BaCl_2$ and $FeCl_3-BaCl_2$ with alkali solution $NaOH-Na_2CO_3$, were investigated about the thermal reaction, crystal growth, and the magnetic properties of the sintered specimens. The very single-domain crystallites of Ba-ferrite with high coercive force are formed from the coprecipitate of amorphous $Fe(OH)_3$ and amorphous $BaCO_3$ at lower temperature than that of subnucleus crystalline $\delta$-FeOOH and amorphous $BaCO_3$.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.325-325
• /
• 2006

Cationic polymerization of isobutyl vinyl ether using various metal halides was examined in toluene in the presence of an added base at $0^{\circ}C$. In conjunction with an appropriate weak base such as ethyl acetate or 1,4-dioxane, all metal halides but $FeBr_{3}\;and\;GaCl_{3}$ led to living cationic polymerization. The polymerization rates varied as follows: $FeBr_{3},\;GaCl_{3}\;>\;FeCl_{3}\;>\;SnCl_{4}\;>\;InCl_{3}\;>\;ZnCl_{2}\;>>\;AlCl_{3},\;HfCl_{4},\;ZrCl_{4}\;>\;EtAlCl_{2},\;BiCl_{3},\;TiCl4\;>>\;SiCl_{4}\;>\;GeCl_{4}$. This order partially corresponds to that of the equilibrium constant in the formation of a carbocation from a chloroalkane in the presence of a carbonyl compound. With extremely active Lewis acids, such as $FeBr_{3}\;and\;GaCl_{3}$, the use of a stronger base, THF, was required to achieve living polymerization.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.67-71
• /
• 2013

$FeCl_3$ has been used as an etchant for metal etching such as Fe, Cu, and Al. In the process of metal etching, $Fe^{3+}$ is reducted to $Fe^{2+}$ and the etching rate becomes slow and etching efficiency decreased. Waste $FeCl_3$ etchant needs to be regenerated because of its toxicity and treatment cost. In this work, HCl was initially mixed with the waste $FeCl_3$ and then, strong oxidants, such as $O_2$ and $H_2O_2$, were added into the mixed solution to regenerate the waste etchant. During successive etching and regeneration processes, oxygen-reduction potential (ORP) was continuously measured and the relationship between ORP and etching capability was investigated. Regenerated etchant using a two vol% HCl of the total etchant volume and a very small amount of $H_2O_2$ was very effective in recovering etching capability. During the etching-regeneration process, the same oxygen-reduction potential variation cannot be repeated every cycle since concentrations of $Fe^{2+}$ and $Fe^{3+}$ ions were continuously changed. It suggested that the control of etching-regeneration process based on the etching time becomes more efficient than that of the process based on oxygen reduction potential changes.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.53-58
• /
• 2018

Solvent extraction of Li(I) from weak HCl solution was investigated by the mixture of TBP/MIBK with other neutral extractants such as Cyanex 923, TOPO and TOP. The TBP/MIBK organic phase was loaded with 0.1 M $FeCl_3$ at different HCl concentrations (1-9 M). Extraction of Li(I) from weak HCl solution is related to the stability of $FeCl_3$ in the organic mixture. As HCl concentration increased in preparing the loaded TBP phase, the stripping percentage of Fe(III) during the extraction of Li(I) became reduced and thus Li(I) could be extracted by ion exchange reaction with hydrogen ion in the organic. The concentration of TBP in the extractant mixture affected the stability of $FeCl_3$. Compared to TBP, Fe(III) was easily stripped from the loaded MIBK and thus no Li(I) was extracted by the mixture with MIBK. The nature of neutral extractant with TBP/MIBK showed little difference in the extraction of Li(I) and stripping of Fe(III).

• Journal of the Korean Chemical Society
• /
• v.37 no.7
• /
• pp.648-654
• /
• 1993

$[M(cyclam)X_2]Y(M=Co^{3+},\;Fe^{3+},\;Mn^{3+}\;:\;X=Cl-^,\;Br^-,\;NCS^-\;:\;Y=Cl^-,\;Br^-,\;NCS^-),\;[Co(trans-14-diene)X_2]Y(X=Cl^-,\;Br^-\;:\;Y=ClO_4^-)\;and\;[Co(trans-14-diene)](ClO_4)_2$ were able to activate an molecular oxygen under sodium borohydride. 2,4-di-tert-butylphenol and 2,6-di-tert-butylphenol reacted with activated molecular oxygen to give 2,4-tert-butyl-1,6-benzoquinone(BQ) and 3,5,3',5'-tetra-tert-butyldiphenoquinone(DPQ). The saturated tetraazamacrocyclic complexes, $[Co(cyclam)X_2]Y$, were more an effective catalyst than $[Co(trans-14-diene)X_2]Y$ the unsaturated complexes in the formation of BQ and DPQ. The mole ratio of $O_2$ vs. catalyst $(O_2/M)$ for $[Co(cyclam)X_2]Y$ and [Co(trans-14-diene)X_2]Y$ was 1/1, while it was 1/2 for $[M(cyclam)Cl_2]Cl(M=Fe(III),\;Mn(III))$. The results suggested that Co(III)-macrocyclic complexes activated molecular oxygen as superoxolike ${O_2}^-$ and $[M(cyclam)Cl_2]Cl(M=Fe(III),\;Mn(III))$ activated that as peroxolike $O_2^{2-}$.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.12
• /
• pp.1308-1311
• /
• 1997

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.04a
• /
• pp.141-144
• /
• 2001

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.8
• /
• pp.658-666
• /
• 2000

Sb and Sb-Fe doped SnO$_2$film resistors were prepared by spray pyrolysis technique. The effects of Sb and Sb-Fe addition on TCR and electrical properties of SnO$_2$film resistors were studied. Also the dependence of electrical properties on the substrate temperature and substrate-nozzle distance was investigated. The Sn-Sb system with 7.9 mol% SbCl$_3$(STO-406) and Sn-Sb-Fe systems with 7.3 mol% SbCl$_3$+7.3 mol% FeCl$_3$(STO-407) and with 3.4 mol% SbCl$_3$+7.7mol% FeCl$_3$(STO-408) were prepared. Both of the systems Sn-Sb and Sn-Sb-Fe represented nonlinearity of TCR with temperature. As the amount of Fe increased TCR was shifted to positive direction. Decreasing Sb or increasing Fe caused resistivity to increase. Also increasing Fe caused the crystallization degree of rutile structure in SnO$_2$film to decrease. The electrical resistivity decreased with increasing substrate temperature The resistivity decreased with increasing substrate-nozzle distance in the ranges from 15 to 25 cm and increased rapidly at the distance over 25cm.

• Clean Technology
• /
• v.23 no.2
• /
• pp.158-162
• /
• 2017

$FeCl_3$ solution has been used as an etchant for metal etching such as Fe, Cu, Al and Ni. In the etching process, $Fe^{3+}$ is reduced to $Fe^{2+}$ and the etching efficiency is decreased. Waste $FeCl_3$ etchant has environmental, economic problems and thus the regeneration of the etching solution has been required. In this study, HCl was mixed with the $FeCl_2$ solution and then, $H_2O_2$, $NaClO_3$ were added into the mixed solution to oxidize the $Fe^{2+}$. During the oxidation process, oxidation-reduction potential (ORP) was measured and the relationship between ORP and oxidation ratio was investigated. The ORP is increased with increasing the concentration of $H_2O_2$ and $NaClO_3$, and then the ORP is decreased with oxidation progress. Such a behavior was in good agreement with Nernst's equation. Also, the oxidation efficiency was about 99% when a sufficient amount of HCl and $H_2O_2$, $NaClO_3$ were added.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.373-378
• /
• 2003

As a part of assessment of the structural material for the molten salt handling system, corrosion behavior of austenitic alloys, Fe-base and Ni-base in the molten salt of $LiCl-Li_2O_2$ was investigated in the range of temperature; 650~$725^{\circ}C$, time; 24- 168h, $Li_2O$; 3wt%, mixed gas; Ar-10%$O_2$. In the molten salt of $LiCl-Li_2O_2$, Ni-base alloys showed higher corrosion resistance than Fe-base alloys. Fe-base alloy with low Fe and high Ni contents exhibited better corrosion resistance. The scales of $Cr_2O_3$, $FeCr_2O_4$ on Fe-base alloys were showed, and $Cr_2O_3$, $NiFe_2O_4$ on Ni-base alloys were also showed.