• Journal of Adhesion and Interface
• /
• v.10 no.2
• /
• pp.98-105
• /
• 2009

Poly(amic acid) was synthesized from the reaction of p-PDA/ODA and PMDA/BPDA and silane oligomer containing epoxy group was also synthesized from the reaction of tetramethylorthosilicate (TMOS) and glycidol. After hybridizing poly (amic acid) and silane oligomer, they were effectively converted into polyimide/silica hybrid films by thermal imidization process. As the silica contents in hybrid films increased, CTE values decreased from 17 ppm/K to 10 ppm/K and the tensile modulus increased, in spite of decreasing tensile strength. In addition, the peel test showed that the adhesion strength of hybrid film was enhanced from $0.43kg_f/cm$ to $1.02kg_f/cm$. Therefore, it could be concluded that the polyimide/silica hybrid film is effective to enhance adhesion strength for FCCL films.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.72-79
• /
• 2018

Hybrid F2HX surfactants bearing a sulfate moiety and both hydrocarbon and fluorocarbon chains were prepared by the reaction of alkyl glycidyl ethers with fluoro-alcohol, and subsequent sulfation. The fluorocarbon number in F2HX was fixed at the shortest number possible (i.e., 2), while the hydrocarbon number (X) in the second chain was varied between 2, 4, 6, and 8. Their surface-active properties and emulsion stabilities were systematically estimated as a function of the X. Among them, F2H8 exhibited the optimal surfactant performance, which was comparable to previously reported surfactants and it was successfully applied in the emulsion polymerization of vinylidene fluoride.

• Composites Research
• /
• v.22 no.5
• /
• pp.15-23
• /
• 2009

The lubricant tribological characteristics of $Al_2O_3$ fiber and SiC particle hybrid metal matrix composites (MMCs) fabricated by squeeze casting method was investigated using a pin-on-disk wear tester. The wear tests of the MMCs were performed according to fiber/particle hybrid ratio in the planar-random (PR) and normal (N) orientations sliding against a counter steel disk at a fixed speed and $25\;kg_f$ loading under different sliding distances and temperatures. The test results showed that the wear behavior of MMCs varied with fiber orientation and hybrid ratio. At room temperature, the lubricant wear behavior of F20P0 unhybrid PR-MMCs was superior to that of N-MMCs while the hybrid composites exhibited the reverse lubricant wear behavior. It was also revealed that the wear resistance of PR-MMCs was superior to that of the N-MMCs due to the joint action of reinforcements and lubricant film between the friction surfaces at an elevated temperature of $100^{\circ}C$ for both fiber only and hybrid cases. In case of $150^{\circ}C$, although the trend of weight loss was similar to that of others, the wear resistance of PR-MMCs was better than that of N-MMCs for hybrid MMCs.

• Korean Journal of Ichthyology
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2017

A natural hybrid of interspecific between the Coreoleuciscus splendidus and C. aeruginos (Cypriniformes: Cyprinidae) was captured in the Hwang-ji Stream, a tributary of the Nakdong River basin in Korea. An interspecific hybrid between C. splendidus and C. aeruginos was genetically identified based on morphological characteristics and the sequence analysis of nuclear recombination activating gene 1 (RAG1) gene (1,334 bp) and mitochondrial cytochrome c oxidase subunit 1 (CO1) gene (1,551 bp). As a result of morphological variations, the natural hybrid appeared to have an intermediate character between two parental species (C. splendidus and C. aeruginos) in three variations of black array (s) on dorsal, caudal and anal fin rays. Phylogenetic analysis inferred from RAG1 and CO1 sequence data revealed that Coreoleuciscus populations from Hwang-ji stream consist of two pure Coreoleuciscus species and a hybrid individual group. The individuals were clearly identified the cross and reciprocal hybrid by CO1 gene analysis. In RAG1 gene, 13 nucleotide variation loci were detected and the hybrid individuals displayed the double peaks of sequence chromatograms at the 9 diagnostic positions. In this study, molecular data and morphological variations were clearly demonstrated that hybridization did occur between C. splendidus and C. aeruginos. However, F2 hybrid generation and reproductive capacity of F1 hybrid individuals were not demonstrated.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.2
• /
• pp.61-67
• /
• 2010

The bivoltine tropical tasar ecoraces of Antheraea mylitta Drury produces cocoons for seed production under seed crop rearing (July-August with $22{\sim}30^{\circ}C$ temperature and 50~70% relative humidity) and for silk production under commercial crop rearing (September-December with $17{\sim}27^{\circ}C$ temperature and 60~80% relative humidity). To consider the impact of hybrid vigour on egg, larva, cocoon and silk related commercial traits, the $F_1$ hybrids made among Daba, Jata and Raily ecoraces were assessed successively for three years. The hybrid vigour in the $F_1$ hybrid of Daba$\times$Jata ($T_7$) was positive for egg fertility (+23.1%), shell weight (+25.6%), silk yield (+79.0%) and filament length (+68.1%), with filament of high denier (11.98d) and reduced larval span (-7.1%). The Jata$\times$Daba ($T_8$) hybrid has shown negative heterosis in egg fertility (-8.0%) compared to the other F1 hybrids, Daba$\times$Raily ($T_9$) and Raily$\times$Daba ($T_{10}$), when they rise simultaneously during the commercial crop season. The better performance of parental ecoraces ($T_4$ to $T_6$) in their commercial traits during commercial crop over parents of seed crop ($T_1$ to $T_3$) and the superior performance of $F_1$ hybrids ($T_7$ to $T_{10}$) over parents of commercial crop ($T_4$ to $T_6$) during commercial crop season indicates the apparent hybrid vigour in tasar $F_1$ hybrids. As the Daba$\times$Jata ($T_7$) and Jata$\times$Daba ($T_8$) $F_1$ hybrids have shown highest hybrid vigour, their rearing during commercial crop can optimize the silk productivity and commercial sustenance of the tasar silk industry.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3269-3273
• /
• 2013

Graphene oxide (GO) has been of particular interest because it provides unique properties due to its high surface area, chemical functionality and ease of mass production. GO is produced by chemical exfoliation of graphite and is decorated with oxygen-containing groups such as phenol hydroxyl, epoxide groups and ionizable carboxylic acid groups. Due to the presence of those functional groups, GO can be utilized as a novel platform for hybrid nanocomposites in chemical synthetic approaches. In this work, GO-$SnO_2$ nanocomposites have been prepared through the spontaneous formation of molecular hybrids. When $SnO_2$ precursor solution and GO suspension were simply mixed, $Sn^{2+}$ was spontaneously formed into $SnO_2$ nanoparticles upon the deoxygenation of GO. Through further chemical reduction by adding hydrazine, reduced GO-$SnO_2$ hybrid was finally created. Our investigation for the electrocapacitive properties of hybrid electrode showed the enhanced performance (389 F/g), compared with rGO-only electrode (241 F/g). Our approach offers a scalable, robust synthetic route to prepare graphene-based nanocomposites for supercapacitor electrode via spontaneous hybridization.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.617-621
• /
• 2016

In addition to the energy storage facilities based on high power technologies, Electric double layer capacitors(EDLC) are today's candidate for power quality stabilization. However, its low energy density is often inhibiting factor for application of electric power industry. Hybrid supercapacitor is an promising energy storage device that positioned between conventional EDLC and Li-ion battery. This paper describes the preparation and characteristics of a hybrid supercapacitor and module for power quality stabilization. A cylindrical 3200F hybrid supercapacitor ($60{\times}74.5mm$) was assembled by using the $Li_4Ti_5O_{12}$ electrode as an anode and activated carbon as a cathode. It shows 2.5 times higher energy density than conventional EDLC with the same volume. In order to determine the characteristics of the hybrid supercapacitor Module for uninterruptible power supply (UPS), hybrid supercapacitor cells were connected in series with active balancing circuit. At even the high current density of 14A(10C), Module prepared by 18 cells showed the capacitance of 170F at 30~50V, suggesting the applicability for UPS.

• Plant Resources
• /
• v.2 no.1
• /
• pp.22-25
• /
• 1999

Molecular markers are useful to confirm the hybridity of F1 plant derived from cross of two homozygous parents with similar morphological traits. RAPD markers were used to test F1 hybrid plant obtained from cross of two homozygous soybean (Glycine max) parents. Fl plant for cross I was made from the mating of Hobbit87 (female) and L63-1889 (male) and Fl plant for cross II was obtained from the mating of H1053 (female) and L63-1889 (male). Selfing plant per each cross was also obtained. Among 20 Operon primers used, OPA04 and OPA09 show polymorphism between cross I and II parent. Band in size 1Kb of OPA04 and 2.1Kb of OPA09 primer was polymorphic band. This fragment identified Fl hybrid plant and selfing plant in cross I and II. Female parent Hobbit87 in cross I and H1053 in cross II has no this fragment (recessive allele). However, male parent L63-1889 and Fl hybrid plant in cross I and II has this size of polymorphic band (dominant allele). This indicated that Fl hybrid and selfing plants were detected by RAPD marker before phenotypic marker would be used to identify Fl hybridity. Amplification products of selfing plant for cross I and II were completely same to the those of female parent. When mature, flower color of Fl hybrid plant in cross I and II was purple and flower color of selfing plant in cross I and II was white. Purple flower is dominant trait. Fl hybridity was successfully detected at very early growth stage using RAPD marker. Therefore, RAPD marker can be used broadly to confirm Fl hybridity in many crops.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.199-205
• /
• 2004

With the main objective to know the feasibility of exploitation of F$_1$ hybrids in semi arid and arid climatic conditions of India, the present study was carried out by utilising RD$_1$ as female parent and six bivoltine silkworm breeds viz., CSR$_2$, CSR$_4$, CSR$_{5}$, CSR$_{17}$, CSR$_{18}$ and CSR$_{19}$ along with NB$_4$D$_2$ as male parents. Different hybrids exhibited their superiority for various economic characters during different seasons. Among F$_1$ hybrids, RD$_1$${\times}$CSR$_{5}$ was adjudicated as the best hybrid in terms of expression of significant positive hybrid vigour over mid parental value for five economic characters namely hatching %, cocoon yield, cocoon weight, cocoon shell weight and filament size, highest multiple trait average evaluation index value of 56.77 and comparatively uniform cocoon size with coefficient of variation (CV%) of 3.80 and Standard Deviation (SD) of 7.99 during September - October 2003. Results of the present study revealed that the F$_1$ hybrid RD$_1$${\times}$CSR$_{5}$ can be successfully exploited on commercial in semi arid and arid climatic conditions in India. India.dia.

• Journal of Korea Foresty Energy
• /
• v.1 no.2
• /
• pp.1-19
• /
• 1981

In order to investigate biomass yield of one-year-old hyblrid poplars, Pripulusalba x P. glandulosa $F_1$ and Populus nigra var. italica x P. maximowiczii $F_1$clones, as energy and fiber resources, dry matter yield, leaf area, leaf area index, dry matter production ability, specific gravity and fiber length and width were measured. Dry matter yield was 1.89 ton/ha for Poplus alba x P. glandulosa $F_1$ and 3.63 ton/ha for Populus nigra via.italica x P. merximowiczii $F_1$ clones in the planting density of 20,000 trees/ha and in the planting density of 40,000 trees/ha was 3.87 ton/ha for Populus alba x P. glandulosa $F_1$and 5.64 ton/ha for Populus nigra var. italica x P. maximowiczii $F_1$ clones. Leaf area index was 1.24mtim2 in the planting density of 20,000 trees/ha and 2.45 m31m3 in the density of 40,000 trees/ha for Populus alba x P. glandulosa $F_1$ clones and it was 1.96 m21m2 in the planting density of 20,000 trees/ha and 3.36 m21m2 in the density of 40,000 trees/ha for the hybrid $F_1$ Populus nigra var. italica x P. maximowiczii clones. The average specific gravity of the hybrid poplars was 0..36 when bark and pith were included and 0.31 when bark and pith were removed in the plot of 20,000 trees/ha and in the 40,000 trees/ha plot showed 0.35 and 0.31 respectively, for Populus alba x P. glandulosa $F_1$clones. It was 0.36 when bark and pith were included and 0.32 when bark and pith were removed in the 20,000 trees/ha plot and in the 40,000 trees/ha plot was 0.34 and 0.31 respectively for Populus nigra var. italica x P. maximowiczii $F_1$clones. The average fiber length was 0.57 mm in the 20,000 trees/ha plot and 0.58 mm in the 40,000 trees/ha plot for Poplus alba x P. glandulosa $F_1$clones and was 0.60 in both plots of 20,000 trees/ha and 40,000 trees/ha for Populus nigra var. italica x P. maximowiczii $F_1$ clones. There is a big clonal variation among those clones studied, showing high selection potential in both species.