• 한국작물학회지
• /
• 제29권1호
• /
• pp.55-61
• /
• 1984

1981년부터 최 등이 재래종 옥수수의 수집종 가운데서 병발한 한계통(MET)을 분얼이 많이되고 또한 개체당 이삭(수)수도 많아서 사료용 옥수수의 육종재료로 가치가 있다고 생각되었으나 이 옥수수에 대한 유전적 분석이 확실히 되어 있지를 않았다. 따라서 본연구에서는 MET와 비분얼성이며 이삭도 하나 밖에 달리지 않는 수원 19호 (Mo17$\times$B68) 교잡종을 이용하여 F$_1$, F$_2$, BC$_1$, 세대를 양성하고 Mather의 세대평균분석법에 의하여 분석한 결과 MET 계통의 다수.다얼성은 염색체상의 유전인자에 의한 다기 보다 세포질적 유전인자에 의한다는 것을 확인하였다. 이같은 결론은 MET계통을 모계로 하여 교잡한 려잡종 세대에서 확실히 얻을 수가 있었다. 즉 MET 계통을 모계로 이용했을 때의 평균분얼과 이삭수는 MET를 부계로 이용했을 때의 분얼수와 이삭수 보다 많았는데 이는 이같은 특성들이 모계유전을 하기 때문이다. 그러나 이같은 특성들이 F$_1$이나 F$_2$에서 나타나지 않은 것은 F$_1$에서 특히 보여주는 잡종강세현상 때문에 옥수수의 정부우세성이 매우커서 상반적으로 분얼이나 이삭의 발달이 억제되었기 때문이라고 생각된다. 그리고 분얼이나 이삭의 절대수가 모계로 이용했던 MET에서 보다 잡종세대가 진전될수록 적어지는 것은 잡종강세외에도 MET계통의 세포질약 내지 유전인자적 축적량(Dose)이 적어지기 때문이라고 생각되어진다. 이같은 MET계통의 특성은 려교잡에 의한 MET계통의 세포질을 유지하거나 축적하므로써 사료용 옥수수의 육종에 이용될 수 있을 것으로 보여졌다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권8호
• /
• pp.1119-1126
• /
• 2013

The objective of this study was to compare the goodness of fit of four lactation curve models: Wood's Gamma model (WD), Wilmink (WL), and Pollott's multiplicative two (POL2) and three parameters (POL3) and to determine the environmental factors affecting the complete lactation curve of F1 dairy sheep under organic management. A total of 5,382 weekly milk yields records from 150 ewes, under organic management were used. Residual mean square (RMS), determination coefficients ($R^2$), and correlation (r) analysis were used as an indicator of goodness of fit for each model. WL model best fitted the lactation curves as indicated by the lower RMS values (0.019), followed by WD (0.023), POL2 (0.025) and POL3 (0.029). The four models provided total milk yield (TMY) estimations that were highly correlated (0.93 to 0.97) with observed TMY (89.9 kg). The four models under estimated peak yield (PY), whereas POL2 and POL3 gave nearer peak time lactation estimations. Ewes lambing in autumn had higher TMY and showed a typical curve shape. Higher TMY were recorded in second and third lambing. Season of lambing, number of lambing and type of lambing had a great influenced over TMY shaping the complete lactation curve of F1 dairy sheep. In general terms WL model showed the best fit to the F1 dairy sheep lactation curve under organic management.

• 한국음향학회지
• /
• 제22권6호
• /
• pp.463-471
• /
• 2003

본 논문에서는 아시아ㆍ태평양 지역에서 실시한 음향교정기의 국제비교 결과를 검토, 분석하였다. 국제비교에 사용된 음향교정기는 음압레벨교정기와 피스톤폰이었으며, 출력음압레벨을 측정하기 위해 사용된 마이크로폰은 1" 및 1/2" 표준마이크로폰 (LS1P, LS2P)과 1" 및 1/2" 기준 마이크로폰 (WS1P/F, WS2P/F)이다. 표준 마이크로폰을 이용하여 측정한 결과는 만족스러웠으나 기준 마이크로폰을 사용하여 측정한 결과는 En 값이 ±1.0 이내에는 들었으나 상대적으로 큰 편차를 보였다. 이러한 결과는 기준 마이크로폰의 음압감도레벨의 부정확한 교정으로 나타났다. 새로이 제정된 기준 마이크로폰의 비교교정에 따라 정밀 교정한 값을 사용한 결과 외국 표준기관들이 측정한 출력음압레벨과 유사한 값을 얻을 수 있었다.

• 상하수도학회지
• /
• 제34권3호
• /
• pp.183-190
• /
• 2020

Although membrane bio-reactor (MBR) has been widely applied for wastewater treatment plants, the membrane fouling problems are still considered as an obstacle to overcome. Thus, many studies and commercial developments on mitigating membrane fouling in MBR have been carried out. Recently, high voltage impulse (HVI) has gained attention for a possible alternative technique for desalting, non-thermal sterilization, bromate-free disinfection and mitigation of membrane fouling. In this study, it was verified if the HVI could be used for mitigation of membrane fouling, particularly the internal pore fouling in MBR. The HVI was applied to the fouled membrane under different conditions of electric fields (E) and contact time (t) of HVI in order to investigate how much of internal pore fouling was reduced. The internal pore fouling resistance (R_f) after HVI induction was reduced as both E and t increased. For example, R_f decreased by 19% when the applied E was 5 kV/cm and t was 80 min. However, the R_f decreased by 71% as the E increased to 15 kV/cm under the same contact time. The correlation between E and t that needed for 20% of R_f reduction was modeled based on kinetics. The model equation, E^1.54t = 1.2 × 10³ was obtained by the membrane filtration data that were obtained with and without HVI induction. The equation states the products of En and t is always constant, which means that the required contact time can be reduced in accordance with the increase of E.

• Computers and Concrete
• /
• 제31권3호
• /
• pp.253-265
• /
• 2023

In this research, the gene expression programming (GEP) technique was employed to provide a new model for predicting the maximum loading capacity of concrete-encased steel (CES) columns. This model was developed based on 96 CES column specimens available in the literature. The six main parameters used in the model were the compressive strength of concrete (f_c), yield stress of structural steel (f_ys), yield stress of steel rebar (f_yr), and cross-sectional areas of concrete, structural steel, and steel rebar (A_c, A_s and A_r respectively). The performance of the prediction model for the ultimate load-carrying capacity was investigated using different statistical indicators such as root mean square error (RMSE), correlation coefficient (R), mean absolute error (MAE), and relative square error (RSE), the corresponding values of which for the proposed model were 620.28, 0.99, 411.8, and 0.01, respectively. Here, the predictions of the model and those of available codes including ACI ITG, AS 3600, CSA-A23, EN 1994, JGJ 138, and NZS 3101 were compared for further model assessment. The obtained results showed that the proposed model had the highest correlation with the experimental data and the lowest error. In addition, to see if the developed model matched engineering realities and corresponded to the previously developed models, a parametric study and sensitivity analysis were carried out. The sensitivity analysis results indicated that the concrete cross-sectional area (A_c) has the greatest effect on the model, while parameter (f_yr) has a negligible effect.

• 디지털산업정보학회논문지
• /
• 제11권1호
• /
• pp.9-18
• /
• 2015

Numerical analysis of PSC box bridge bearings for high speed KTX train vehicles has been carried out as a virtual simulation for Ubiquitous Technology. Improved numerical models of bridge, vehicle and interaction between bridge and train are considered, where bending and torsional modes are provided, whereas the exist UIC code is applied by the simplified HL loading. Dynamic and static analysed results are compared to get Dynamic Amplification Factors (D. A. F.) for maximum deflections and bending stresses up to running speed of 500 km/h. Equation from the regression analysis for the D. A. F. is presented. Sliding distance of the bearings for various KTX running speeds is compared with maximum and accumulated distances by the dynamic behaviors of PSC box bridge. Dynamic and static simulated sliding distances of the bearings according to the KTX running speed are proved as a major parameter in spite of the specifications of AASHTO and EN1337-2 focused on the distance by temperature variations.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.1-20
• /
• 2015

This work is devoted to the study of fresh and hardened properties of concrete containing recycled gravel. Four formulations were studied, the concrete of reference and three concretes containing recycled gravel with 30, 65 and 100 % replacement ratios. All materials were formulated on the basis of S4 class of flowability and a target C35 class of compressive strength according to the standard EN 206-1. The paper first presents the mix design method which was based on the optimization of cementitious paste and granular skeleton, then discusses experimental results. The results show that the elastic modulus and the tensile strength decrease while the peak strain in compression increases. Correlation with the water porosity is also established. The validity of analytical expressions proposed by Eurocode 2 is also discussed. The obtained results, together with results from the literature, show that these relationships do not predict adequately the mechanical properties as well as the stress-strain curve of tested materials. New expressions were established to predict the elastic modulus and the peak strain from the compressive strength of natural concrete. It was found that the proposed relationship E-$f_c$ is applicable for any type of concrete while the effect of substitution has to be introduced into the stress-strain (${\varepsilon}_{c1}-f_c$) relationship for recycled aggregate concrete. For the full stress-strain curve, the model of Carreira and Chu seems more adequate.

• Journal of Microbiology and Biotechnology
• /
• 제25권8호
• /
• pp.1241-1245
• /
• 2015

The aim of the present work was to examine the putative promoter region of the operon ansPAB and to determine the general elements required for the regulation of transcriptional activity. The transcriptional start site of the ansPAB promoter was determined by using highresolution S1-nuclease mapping. Sequence analysis of this region showed -10 and -35 elements, which were consistent with consensus sequences for R. etli promoters that are recognized by the major form of RNA polymerase containing the σ⁷⁰ transcription factor. Mutation studies affecting several regions located upstream of the transcriptional start site confirmed the importance of these elements on transcriptional expression.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1296-1309
• /
• 2024

The aim of this work is to explore the effect of the double subdiffusion on the stability in BWRs. A BWR novel reduced order model with double subdiffusion effects: reduced order fractional model (DS-F-ROM) to describe the neutron and heat transfer processes was proposed for this study. The double subdiffusion was developed with a fractional-order two-equation model, and with different fractional-orders and relaxation times. The stability analysis was carried out using the root-locus method and change from the s to the W domain and were confirmed using the time-domain evolution of neutron flux for a unit step change in reactivity. The results obtained using the reduced fractional-order model are presented for different anomalous diffusion coefficient values. Results are compared with normal diffusion and P1 equations, which are obtained straightforwardly with DS-ROM when relaxation time tends to zero, and when the anomalous diffusion coefficient tends to one, respectively.

• 미생물학회지
• /
• 제48권1호
• /
• pp.16-21
• /
• 2012

여러 식물의 근권에서 세균 균주들을 분리하여 이들의 항진균성 물질 생성능을 조사하였다. 분리균주 중 Fusarium oxysproum을 포함한 5가지 주요 식물병원성 진균에 대한 생장저해가 우수한 7개 균주를 16S rRNA 유전자 염기서열로 동정하였다. 이들 중 Paenibacillus peoriae RhAn32, Pseudomonas otitidis TK1과 Bacillus cereus TK2가 가장 넓은 생장 저해범위를 나타내었으며 항진균성 물질 중 siderophore 생성능은 P. otitidis TK1이 3.21 mM/ml로 가장 높았고 HCN은 Pseudomonas koreensis Rh2와 Rh7 균주만이 생성하였으며 Brevibacterium frigoritolerans EnA9와 P. peoriae RhAn32는 각각 1558.9와 $1436.7{\mu}M$ glucose/min/mg protein의 높은 chitinase 활성을 나타내었다. P. otitidis TK1과 P. peoriae RhAn32의 항진균능을 진균과의 공동배양을 통해 정량분석한 결과 세 종류의 Fusarium oxysproum의 생장을 유의성 있게 저해하였다. P. otitidis TK1은 식물생장을 촉진하는 호르몬인 auxin의 생성능도 가장 높았는데 이 균주를 4주 자란 토마토 유묘에 F. oxysporum f. sp. lycopersici와 동시에 접종하여 8주간 재배하였을 때 줄기와 뿌리 길이 및 습윤 중량이 비접종 대조군에 비해 각각 45.7, 64.9와 118%로 유의성 있게 증가하였다. 따라서 이 균주들은 유기합성농약을 대체하면서 식물생장을 촉진하는 미생물제로서의 적용이 가능할 것으로 기대된다.