• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.332-338
• /
• 2009

A xylan-decomposing bacterium, HY-20, was isolated from the gut of a honeybee, Apis mellifera, and identified as Bacillus sp. The extracellular GH11 xylanase (XylP) gene (687-bp) of strain HY-20 encoded a protein of 228 amino acids with a deduced molecular mass of 25,522 Da and a calculated pI of 9.33. The primary structure of XylP was 97% identical to that of B. pumilus xylanase (GenBank accession no.: AY526092) that has not been characterized yet. The recombinant His-tagged enzyme (rXylP) overexpressed in Escherichia coli BL21 harboring pET-28a(+)/xylP was purified to electrophoretic homogeneity by cation exchange and gel permeation chromatographies. The purified enzyme exhibited the highest catalytic activity toward birchwood xylan at pH 6.5 and $50^{\circ}C$ and retained approximately 50% of its original activity when pre-incubated at $55^{\circ}C$ for 15 min. The recombinant enzyme was completely inactivated by $Hg^{2+}$ (1 mM) and N-bromosuccinimide (5 mM), while its activity was slightly stimulated by approximately 10% in the presence of $Mn^{2+}$ (1 mM), $Fe^{2+}$ (1 mM), and sodium azide (5 mM). rXylP was able to efficiently degrade various polymeric xylose-based substrates but PNP-sugar derivatives and glucose-based polymers were not susceptible to the enzyme.

• Journal of Embryo Transfer
• /
• v.20 no.3
• /
• pp.303-309
• /
• 2005

This study was conducted to examine the effects of OA on metaphase of meiosis II and the mitochondrial activity of cytoplasm in bovine cumulus oocytes complexes(COCs) during in vitro maturation. Hanwoo COCs were collected from the slaughterhouse cow ovaries and matured in TCM199 supplemented with $0.1\%$ PVA, 0.2 uM, 2 uM, 20 uM OA for the maturation rate of OA concentration. For the maturation effects between OA and cycloheximide(CX), COCs were matured in TCM199 with 25 ug/mL CX, 25 ug/mL CX (6 hrs culture) plus 2 uM OA or 2 uM OA only at a atmosphere $5\%\;CO_2,\;95\%$ air $39^{\circ}C$ for 6, 12, 24 hrs. To evaluate the nuclear types of matured COCs, cumulus cells were removedby $0.5\%$ hyaluronidase sol. and oocytes were fixed in 1:3 acetic acid ethyl alcohol for 30 sec. and then stained with $0.1\%$ basic Fuchsin sol. For the detection of fluoriscent intensity (FI) of matures oocytes, cumulus cells were removed same as performed above and were stained with 20 nM mite tracker for 20 min. at $39^{\circ}C$. Mitochondrial activity of FI in matured oocytes was imaged by laser conforcal microscopy (Fluoview, Olympus, Japan) and were measured scanned face on 5 um from median to endpoint of oocytes. Statical analysis of nuclear types observed the three replicates was carried out with ANOVA and Fisher's protected least significant difference test using the STATVIEW program. FI of matures oocytes was compared the multiples of the least intensity among the measured oocytes. Maturing in TCM199 supplemented with $0.1\%$ PVA, 0.2 uM, 2 uM, 20 uM OA, metaphase B were showed 72.0, 50.0, 70.0, $68.8\%$, respectively and there were different significant(p<0.05). In the case of treatment with OA and CX, metaphase were $73.8\%,\;8.2\%,\;45.5\%,\;73.7\%$ in $0.1\%$ PVA-TCM199, 25 ug/mL CX, 25 ug/mL CX plus OA or 2uM OA only, respeclively. FI was revealed the increasing tendency during the process of maturation. Whereas FI in CX was decreased about 3 times compared to the other treatments of 6 hrs maturation. We conclude that OA regulates bovine COCs maturation and induces the mitochondrial activity during the process of maturation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

• The Korean Journal of Physiology
• /
• v.9 no.2
• /
• pp.7-15
• /
• 1975

The maximum breathing capacity (MBC) and the maximum mid-expiratory flow rate (MMF) are widely used in evaluation of the ventilatory function, among various parameters of pulmonary function. The MBC volume is the amount of gas which can be exchanged per unit time during maximal voluntary hyperventilation. Performance of this test, unlike that of single breath maneuvers, is affected by the integrity of the respiratory bellows as a whole including such factors are respiratory muscle blood supply, fatigue, and progressive trapping of air. Because of this, the MBC and its relation to ventilatory requirement correlates more closely with subjective dyspnea than does any other test. The MMF is the average flow rate during expiration of the middle 50% of the vital capacity. The MMF is a measurement of a fast vital capacity related to the time required for the maneuver and the MMF relates much better to other dynamic tests of ventilatory function and to dyspnea than total vital capacity, because the MMF reflects the effective volume, or gas per unit of time. Therefore, it is important to have a prediction formula with one can compute the normal value for the subject and the compare with the measured value. However, the formulas for prediction of both MBC and MMF of the Korean children and adolescents are not yet available in the present. Hence, present investigation was attempt to derive the formulas for prediction of both MBC and MMF of the Korean children and adolescents. MBC and MMF were measured in 1,037 healthy Korean children and adolescents (1,035 male and 1,002 female) whose ages ranged from 8 to 18 years. A spirometer (9L, Collins) was used for the measurement of MBC and MMF. Both MBC and MMF were measured 3times in a standing position and the highest values were used. For measurement, the $CO_2$ absorber and sadd valve were removed from the spirometer in order to reduce the resistance in the breathing circuit and the subject was asked to breathe as fast and deeply as possible for 12 seconds in MBC and to exhale completely as fast as possible after maximum inspiration for MMF. During the measurement, investigator stood by the subject to give a constant encouragement. All the measured values were subsequently converted to values at BTPS. The formulas for MBC and MMF were derived by a manner similar to those for Baldwin et al (1949) and Im (1965) as function of age and BSA or age and height. The prediction formulas for MBC (L/min, BTPS) and MMF (L/min, BTPS) of the Korean children and adolescents as derived in this investigation are as follows: For male, MBC=[41.70+{$2.69{\times}Age(years)$}]${\times}BSA$ $(m^{2})$ MBC=[0.083+{$0.045{\times}Age(years)$}]${\times}Ht$ (cm) For female, MBC=[45.53+{$1.55{\times}Age(years)$}]${\times}BSA$ $(m^2)$ MBC=[0.189+{$0.029{\times}Age(years)$}]${\times}Ht$ (cm) For male, MMF= [0.544+{$0.066{\times}Age(years)$}]${\times}Ht$ (cm) For female, MMF=[0.416+{$0.064{\times}Age(years)$}]${\times}Ht$ (cm)

• Membrane Journal
• /
• v.32 no.2
• /
• pp.163-171
• /
• 2022

Many studies on pervaporation (PV) for the separation of dilute alcohols as an alternative to conventional energy-intensive technique of distillation have been conducted earlier. The pervaporation transition behavior of ethanol-water mixtures through the PDMS/PSF membrane is important, in order to understand the mechanism of diffusion process. Therefore, in the present work, transient PV behavior for 50 wt% EtOH/H₂O mixture at 50℃ was investigated by using 1194 cm² PDMS/PSF hollow fiber membrane modules. The overall total flux and the separation factor of all the membrane modules increased initially and then gradually decreased with respect to PV time. The initial increase can be attributed to fact that membrane fibers were dry and it took time to dissolve into the membrane surface, but the subsequent decrease is due to the depletion of ethanol concentration in the feed. Therefore, it was confirmed that the ethanol permeation through a PDMS membrane is governed by the solution-diffusion mechanism.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.4
• /
• pp.221-228
• /
• 2023

Background: We assessed the relationship between patient age and remifentanil dosing rate in patients managed under general anesthesia with spontaneous breathing using low-dose remifentanil in sevoflurane. Methods: The participants were patients with an American Society of Anesthesiologists Physical Status of 1 or 2 maintained under general anesthesia with low-dose remifentanil in 1.5-2.0% sevoflurane. The infusion rate of remifentanil was adjusted so that the spontaneous respiratory rate was half the rate prior to the induction of anesthesia, and γ^H (㎍/kg/min) was defined as the infusion rate of remifentanil under stable conditions where the respiratory rate was half the rate prior to the induction of anesthesia for ≥ 15 minutes. The relationship between γ^H and patient age was analyzed statistically by Spearman's correlation analysis. Results: During dental treatment under general anesthesia using low-dose remifentanil in sevoflurane, a significant correlation was detected between γ^H and patient age. The regression line of y = - 0.00079 x + 0.066 (y-axis; γ^H, x-axis; patient's age) was provided. The values of γ^H provide 0.064 ㎍/kg/min at 2 years and 0.0186 ㎍/kg/min at 60 years. Therefore, as age increases, the dosing rate exhibits a declining trend. Furthermore, in the dosing rate of remifentanil when the patient's respiratory rate was reduced by half from the preanesthetic respiratory rate, the dosing rate provided was around 0.88 mL/h in all ages if the remifentanil was diluted as 0.1 mg/mL. EtCO₂ showed 51.0 ± 5.7 mmHg, and SpO₂ was controlled within the normal range by this method. In addition, all dental treatments were performed without major problems, such as awakening and body movement during general anesthesia, and the post-anesthetic recovery process was stable. Conclusion: General anesthesia with spontaneous breathing provides various advantages, and the present method is appropriate for minimally invasive procedures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.122-122
• /
• 1999

Graphite with its advantages of high thermal conductivity, low thermal expansion coefficient, and low elasticity, has been widely used as a structural material for high temperature. However, graphite can easily react with oxygen at even low temperature as 40$0^{\circ}C$, resulting in CO2 formation. In order to apply the graphite to high temperature structural material, therefore, it is necessary to improve its oxidation resistive property. Silicon Carbide (SiC) is a semiconductor material for high-temperature, radiation-resistant, and high power/high frequency electronic devices due to its excellent properties. Conventional chemical vapor deposited SiC films has also been widely used as a coating materials for structural applications because of its outstanding properties such as high thermal conductivity, high microhardness, good chemical resistant for oxidation. Therefore, SiC with similar thermal expansion coefficient as graphite is recently considered to be a g행 candidate material for protective coating operating at high temperature, corrosive, and high-wear environments. Due to large lattice mismatch (~50%), however, it was very difficult to grow thick SiC layer on graphite surface. In theis study, we have deposited thick SiC thin films on graphite substrates at temperature range of 700-85$0^{\circ}C$ using single molecular precursors by both thermal MOCVD and PEMOCVD methods for oxidation protection wear and tribological coating . Two organosilicon compounds such as diethylmethylsilane (EDMS), (Et)2SiH(CH3), and hexamethyldisilane (HMDS),(CH3)Si-Si(CH3)3, were utilized as single source precursors, and hydrogen and Ar were used as a bubbler and carrier gas. Polycrystalline cubic SiC protective layers in [110] direction were successfully grown on graphite substrates at temperature as low as 80$0^{\circ}C$ from HMDS by PEMOCVD. In the case of thermal MOCVD, on the other hand, only amorphous SiC layers were obtained with either HMDS or DMS at 85$0^{\circ}C$. We compared the difference of crystal quality and physical properties of the PEMOCVD was highly effective process in improving the characteristics of the a SiC protective layers grown by thermal MOCVD and PEMOCVD method and confirmed that PEMOCVD was highly effective process in improving the characteristics of the SiC layer properties compared to those grown by thermal MOCVD. The as-grown samples were characterized in situ with OES and RGA and ex situ with XRD, XPS, and SEM. The mechanical and oxidation-resistant properties have been checked. The optimum SiC film was obtained at 85$0^{\circ}C$ and RF power of 200W. The maximum deposition rate and microhardness are 2$mu extrm{m}$/h and 4,336kg/mm2 Hv, respectively. The hardness was strongly influenced with the stoichiometry of SiC protective layers.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.328-338
• /
• 1998

Porphyromonas endodontalis, an anaerobic Gram negative cocobacillus which was known to be associated with the infected root canals and periapical lesions, is very difficult to culture and to detect by the traditional method in that it requires much time to induce the specific black pigmentation, and it is very sensitive to oxygen and the antibiotics added in the culture medium. In this study, the nucleotide sequences of the 'probe h' (0.73kb), one of the specific DNA probes top. endodontalis (ATCC 35406) which had been developed by our department, was determined and then a pair of primers for PCR amplification was fabricated to identify P. endodontalis. The plasmids containing 'probe h' were purified by $Wizard^{TM}$ Midipreps DNA Purification System (Promega Corp.), and the nucleotide sequences of the 'probe h' were determined by the dideoxy chain termination method using TaqTrack Sequencing System (Promega Corp.) and detected by fluorescent labelling method. The sense/antisense PCR primers were designed with computer software (Lasergene, DNASTAR Ind. PCR was done with a programmable GeneAmp PCR System 2400 (Perkin Elmer-Cetus Co.). Each sample containing the whole genomic DNA of P. endodontalis and other black-pigmented Bacteroides was itailly denatured at $94^{\circ}C$ for 5 min and then subjected to 30 cycles, each of them consisting of 60s at $94^{\circ}C$, 60s at $60^{\circ}C$, and 90s. at $72^{\circ}C$. The amplified DNA was resolved electrophoretically in a 1.0 % agarose gel in 1X TAE buffer, stained with EtBr, and photographed on a UV transilluminator. The results were as follows : 1. The nucleotide sequences of 'probe h' (743 base pairs) were obtained by dideoxy chain termination method, and from that results the specific primers to P. endodontalis (ATCC 35406), 'Primer H1/ Primer H2', were designed. 2. It has been found that 'Primer H1/H2' could detect P. endodontalis (ATCC 35406) using PCR. 3. The PCR system with this primers may be a powerful technique to amplify the specific sequences of 'probe h' of P. endodontalis (ATCC 35406) that produce distinct identification of it from other black-pigmented Bacteroides, and this could help us to determine the nature of periapical disease.

• Korean Journal of Pharmacognosy
• /
• v.40 no.3
• /
• pp.196-204
• /
• 2009

This study was carried out to investigate the in vivo and in vitro inhibitory effect of a traditional herbal complex (HC) extract prepared from a mixture of four oriental herbs (Dioscorea Rhizoma, Glycine soja Sieb. et Zucc, Bombycis corpus, Fermented Glycine soja) that have been widely used for the treatment and prevention of diabetes mellitus on hyperglycemia. The water extract of HC showed potent inhibitory effect on $\alpha$-glucosidase with $IC_{50}$ value of 1.24 mg/mL. Additionally, the ethanol extract of HC was also found to exhibit significant inhibitory effect against protein tyrosine phosphatase $1{\beta}$ ($PTP1{\beta}$), which is known as a major regulator of both insulin and leptin signaling. In the $PTP1{\beta}$ inhibitory assay, the most active n-hexane fraction obtained from the ethanol extract of HC, was identified as a mixture of fatty acid derivatives by gas chromatography-mass spectrometry (GC-MS). In high-fat diet-low dose streptozotocin (STZ)-induced diabetic rat, the water extract of HC improved the oral glucose intolerance as compared with rosiglitazone. HC also caused a marked decrease of body weight and fasting blood glucose and a significant improvement on glucose tolerance in metabolic syndrome mice model. These findings support that this traditional HC may be useful in the control of blood glucose in diabetes mellitus and metabolic syndrome.

• Economic and Environmental Geology
• /
• v.45 no.4
• /
• pp.377-384
• /
• 2012

The main field component of the Earth's magnetic field was modeled from the tri-axial magnetometer onboard KOrean MultiPurpose SATellite-II (KOMPSAT-II) for the purpose of satellite attitude control. The model computed by the KOMPSAT-II magnetometer measurement data is compared with the International Geomagnetic Reference Field (IGRF) model of a degree of up to 13 in spherical harmonic coefficients. The previous study with KOMPSAT-I (Kim et al. 2004) indicated a good correlation of power spectrum of spherical harmonic coefficients with respect to the degree up to 5. This study, however, showed an agreement of the degree up to 8-9 of the coefficient power spectrum and a discrepancy between degrees 10 and 13. We have concluded that relevant data selection process, removal of the external field from the data in the high latitude region, an accuracy of the magnetometer all play an important role in finding a coherence with the IGRF model. This study will be extended to the secular variation model of geomagnetism if longer-period data become available.