• 한국전기전자재료학회논문지
• /
• 제36권4호
• /
• pp.413-417
• /
• 2023

Gallium Oxide (Ga₂O₃) is preferred as a material for next generation power semiconductors. The Ga₂O₃ should solve the disadvantages of low thermal resistance characteristics and difficulty in forming an inversion layer through p-type ion implantation. However, Ga₂O₃ is difficult to inject p-type ions, so it is being studied in a heterojunction structure using p-type oxides, such as NiO, SnO, and Cu₂O. Research the lateral-type FET structure of NiO/Ga₂O₃ heterojunction under the Gate contact using the Sentaurus TCAD simulation. At this time, the VG-ID and VD-ID curves were identified by the thickness of the Epi-region (channel) and the doping concentration of NiO of 1×10¹⁷ to 1×10¹⁹ cm-3. The increase in Epi region thickness has a lower threshold voltage from -4.4 V to -9.3 V at I_D = 1×10^-8 mA/mm, as current does not flow only when the depletion of the PN junction extends to the Epi/Sub interface. As an increase of NiO doping concentration, increases the depletion area in Ga₂O₃ region and a high electric field distribution on PN junction, and thus the breakdown voltage increases from 512 V to 636 V at I_D =1×10^-3 A/mm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.178.2-178.2
• /
• 2015

In and Ga doped ZnO (IGZO) films were deposited on 5 nm thick Cu film buffered Polycarbonate (PC) substrates with RF magnetron sputtering and then the effect of Cu buffer layer on the optical and electrical properties of the films was investigated. While IGZO single layer films show the electrical resistivity of $1.2{\times}10-1{\Omega}cm$, IGZO/Cu bi-layered films show a lower resistivity of $1.6{\times}10-3{\Omega}cm$. Although the optical transmittance of the films in a visible wave length range is deteriorated by Cu buffer layer, IGZO films with 5 nm thick Cu buffer layer show the higher figure of merit of $2.6{\times}10-4{\Omega}-1$ than that of the IGZO single layer films due to the enhanced opto-electrical performance of the IGZO/Cu bi-layered films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.108-111
• /
• 2002

CIGS film has been fabricated on soda-lime glass, which is coated with Mo film. by multi-source evaporation process. The films has been prepared with thickness of 1.0 ${\mu}m$, 1.75${\mu}m$, 2.0${\mu}m$, 2.3${\mu}m$, and 3.0${\mu}m$. X-ray diffraction analysis with film thickness shows that CIGS films exhibit a strong (112) preferred orientation. Furthermore. CIGS films exhibited distinctly decreasing the full width of half-maximum and (112) preferred peak with film thickness. Also, The film's microstructure, such as the preferred orientation, the full width at half-maximum(FWHM), and the interplanar spacing were examined by X-ray diffraction. The preparation condition and the characteristics of the unit layers were as followings ; Mo back contact DC sputter, CIGS absorber layer : three-stage coevaporation, CdS buffer layer : chemical bath deposition, ZnO window layer : RF sputtering, $MgF_2$ antireflectance : E-gun evaporation

• 보존과학회지
• /
• 제36권3호
• /
• pp.162-177
• /
• 2020

부여 관북리 유적에서 시행된 동 생산 및 제련과정을 살펴보기 위하여 '나'지구, '라'지구 출토동 생산 부산물(동 슬래그 및 동 도가니) 11점의 과학적 분석을 시행하였다. 분석방법은 파장분산형 X-선 형광 분석, X-선 회절 분석, 금속 현미경 관찰, 주사 전자현미경-에너지 분산형 X-선 분석기, 전계방출 전자탐침미량분석기, 라만 마이크로분광분석법을 사용하였다. 분석결과 관북리 동 슬래그에서는 주로 도가니 슬래그 및 정련 슬래그에서 전형적인 특징으로 나타나는 규산염 광물, Magnetite, Fayalite, Delafossite 등이 검출되었다. 또한 관북리 동 슬래그는 외형 및 미세조직의 양상의 특성에 따라 1. 유리질 바탕 기지 + Cu prill, 2. 유리질 바탕 기지 + Cu prill + Magnetite, 3. 규산염 광물 바탕 기지 + Cu prill, 4. 결정질(Delafossite, Magnetite)/유리질(비정질) 바탕 기지 + Cu prill, 5. Magnetite + Fayalite, 6. 청동합금 슬래그로 분류되었다. 미세조직 내에는 SiO₂, Al₂O₃, CaO, SO₄ P₂O₅, Ag₂O, Sb₂O₃ 등의 불순물이 잔재되어 있으며, 일부는 주석과 납이 합금되어 있는 것을 확인하였다. 이와 같은 결과를 통해 부여 관북리 유적에서는 동 생산과정 중 배소와 제련을 거친 동 중간생성물의 정련과 불순물이 함유된 동-주석, 또는 동-주석-납의 합금정련을 시행하였다고 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.257.1-257.1
• /
• 2015

Cu(In,Ga)Se2 (CIGS) 박막 태양 전지에서 buffer layer는 CIGS 흡수층과 TCO 사이의 밴드갭 차이에 대한 문제점과 lattice mismatch를 해결하기 위해 필수적이다. 흔히 buffer layer 물질로는 CdS가 가장 많이 사용되고 있으나 Cd의 독성에 관한 문제가 야기되고 있다. 따라서 ZnS(O, OH) buffer layer가 친환경 물질로 기존의 CdS 버퍼 층의 대체 물질로 각광 받고 있으며, 단파장 범위에서 높은 투과율로 인해 wide band gap의 Chalcopyrite 태양 전지에 응용되는 buffer layer로 많은 연구가 이루어지고 있다. 또한 buffer layer를 최적화 하여 carrier lifetime과 양자 효율이 증가시킬 수 있는 특성을 가지고 있다. 이 연구에서는 Cu(In,Ga)Se2 (CIGS) 박막에 화학습식공정 (CBD) 방법을 이용하여 최적화된 ZnS(O, OH)의 증착 조건을 찾고, 고품질의 buffer layer를 제조하기 위한 실험에 초점을 맞췄다. 또한, buffer layer의 막질을 개선하고 균일한 막을 제조하기 위해 processing parameters인 시약의 농도, 제조 시간 및 온도 등의 다양한 변화를 통해 실험을 진행하였다. 그 후 최적화된 ZnS(O, OH) buffer layer의 특성 분석을 위해 X-ray diffraction(XRD), photoluminescence (PL), scanning electron microscope (SEM) and GD-OES을 이용하였고, 이를 통해 제조된 CIGS 박막 태양전지는 light induced current-voltage (LIV) and external quantum efficiency (EQE)를 통해 특성 분석을 실시 하였다. 결과적으로, 제조된 ZnS(O, OH) buffer layer의 $ZnSO4{\cdot}7H2O$의 농도는 0.16 M, Thiourea는 0.5 M, NH4OH는 7.5 M, 그리고 반응 온도는 77.5 oC의 조건 하에 CIGS 기판 위에 균일하고 균열이 없는 ZnS(O, OH) 박막을 제조하였으며 이때 제조된 태양전지의 소자 특성은 Voc = 0.478 V, Jsc = 35.79 mA/cm2, FF = 47.77%, ${\eta}=8,18 %$이다.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.44-48
• /
• 2017

We explain optical and electrical properties of top and bottom-emission structured alternating-current powder electroluminescent devices (ACPELDs) with Ga-doped ZnO(GZO) transparent electrode. The top-emission ACPELDs were layered as the metal electrode/dielectric layer/emission layer/top transparent electrode and the bottom-emission ACPELDs were structured as the bottom transparent electrode/emission layer/dielectric layer/metal electrode. The yellow-emitting ZnS:Mn, Cu phosphor and the barium titanate dielectric layers were layered through the screen printing method. The GZO transparent electrode was deposited by the sputtering, its sheet resistivity is $275{\Omega}/{\Box}$. The transparency at the yellow EL peak was 98 % for GZO. Regardless of EL structures, EL spectra of ACPELDs were exponentially increased with increasing voltages and they were linearly increased with increasing frequencies. It suggests that the EL mechanism was attributed to the impact ionization by charges injected from the interface between emitting phosphor layer and the transparent electrode. The top-emission structure obtained higher EL intensity than the bottom-structure. In addition, charge densities for sinusoidal applied voltages were measured through Sawyer-Tower method.

• 한국전기전자재료학회논문지
• /
• 제16권2호
• /
• pp.102-107
• /
• 2003

This study puts focus on the optimization of growth temperature of CIGS absorber layer which affects severely the performance of solar cells. The CIGS absorber layers were prepared by three-stage co-evaporation of metal elements in the order of In-Ga-Se. The effect of the growth temperature of 1st stage was found not to be so important, and 350$^{\circ}C$ to be the lowest optimum temperature. In the case of growth temperature at 2nd/3rd stage, the optimum temperature was revealed to be 550$^{\circ}C$. The XRD results of CIGS films showed a strong (112) preferred orientation and the Raman spectra of CIGS films showed only the Al mode peak at 173cm$\^$-1/. Scanning electron microscopy results revealed very small grains at 2nd/3rd stage growth temperature of 480$^{\circ}C$. At higher temperatures, the grain size increased together with a reduction in the number of the voids. The optimization of experimental parameters above mentioned, through the repeated fabrication and characterization of unit layers and devices, led to the highest conversion efficiency of 15.4% from CIGS-based thin film solar cell with a structure of Al/ZnO/CdS/CIGS/Mo/glass.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.688-688
• /
• 2013

Al-doped ZnO (AZO) thin films have attracted a lot of attention as a cheap transparent conducting oxide (TCO) material that can replace the expensive Sn-doped In2O3. In particular, AZO thin films are widely used as a window layer of chalcogenide-based thin film solar cells such as Cu(In,Ga)Se2 and Cu2ZnSnS4 (CZTS). Mostly important requirements for the window layer material of the thin film solar cells are the high transparency and the low sheet resistance, because they influence the light absorption by the activelayer and the electron collection from the active layer, respectively. In this study, we prepared the AZO thin films by RF magnetron sputtering using a ZnO/Al2O3 (98：2wt%) ceramic target, and the effect of the sputtering condition such as the working pressure, RF power, and the working distance on the optical, electrical, and crystallographic properties of the AZO thin films was investigated. The AZO thin films with optimized properties were used as a window layer of CZTS thin film solar cells. The CZTS active layers were prepared by the electrochemical deposition and the subsequent sulfurization process, which is also one of the cost-effective synthetic approaches. In addition, the solar cell properties of the CZTS thin film solar cells, such as the photocurrent density-voltage (J-V) characteristics and the external quantum efficiency (EQE) were investigated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.399-399
• /
• 2011

본 논문에서는 Indium tin oxide (ITO) 투명전극의 성장온도($T_G$)가 Cu(In,Ga)$Se_2$ (CIGS) 박막태양전지에 미치는 영향을 살펴 보았다. ITO 박막은 radio-frequency magnetron sputtering을 이용하여 상온에서 $350^{\circ}C$까지의 다양한 $T_G$ 조건에서 i-ZnO/ glass와 i-ZnO/CdS/CIGS/Mo/glass 기판에 증착되었다. ITO의 비저항과 CdS/CIGS 계면 특성은 $T_G$에 크게 영향을 받았다. $T_G{\leq}200^{\circ}C$에서는 $T_G$가 증가할수록 ITO 저항이 감소하였고 이에 따른 series 저항 감소가 태양전지 성능 향상에 기여하였다. 하지만 $T_G$ > $200^{\circ}C$에서는 CdS 버퍼층의 Cd이 CIGS 층으로 확산되어 소자의 p-n 계면이 파괴되는 것을 발견하였다. $T_G=200^{\circ}C$에서 ITO를 증착한 CIGS 태양전지의 경우 가장 높은 광전변환효율을 보였다.

• 한국약용작물학회지
• /
• 제13권5호
• /
• pp.270-275
• /
• 2005

Superoxide dismutases (SOD) are metalloenzymes that convert $O_2^-\;to\;H_2O_2$. Rehmannia glutinosa is highly tolerant to paraquat-induced oxidative stress. The primary objective of this study was to characterize regulation of SOD gene expression in R. glutinosa in response to oxidative stresses and hormones. A full-length putative SOD clone (RgCu-ZnSOD1) was isolated from the leaf cDNA library of R. glutinosa using an expressed sequence tag clone as a probe. RgCu-ZnSOD1 cDNA is 777 bp in length and contains an open reading frame for a polypeptide consisted of 152 amino acid residues. The deduced amino acid sequence of the clone shows highest sequence similarity to the cytosolic Cu-ZnSODs. The two to three major bands with several minor ones on the Southern blots indicate that RgCu-ZnSOD1 is a member of a small multi-gene family. RgCuZnSOD1 mRNA was constitutively expressed in the leaf, flower and root. The expression of RgCu-ZnSOD1 mRNA was increased about 20% by wounding and paraquat, but decreased over 50% by ethylene and $GA_3$. This result indicates that the RgCu-ZnSOD1 expression is regulated differentially by different stresses and phytohormones at the transcription level. The RgCu-ZnSOD1 sequence and information on its regulation will be useful in investigating the role of SOD in the paraquat tolerance of R. glutinosa.