• 한국결정성장학회지
• /
• 제19권3호
• /
• pp.135-143
• /
• 2009

$Cr^{6+}$의 고용화 가능성과 lignin계 혼화제의 성능을 조사하기 위하여 과잉의 $Cr^{6+}$을 첨가하여 KSLI, 미국 TCLP법, Soaking Procedure를 이용하여 각 기준에 따른 용출 특성을 조사하였다. 그 결과 lignin계 혼화제는 첨가에 따라 모르타르 강도 증진을 보였으며 용출 특성에 큰 변화는 없었다.

• Radiation Oncology Journal
• /
• 제36권3호
• /
• pp.192-199
• /
• 2018

Purpose: Use of radiotherapy combined with chemotherapy is increasing in hypopharyngeal cancer. However, many show residual tumor after radiotherapy. Timing for treatment evaluation and salvage therapy is essential. However, optimal timing for salvage surgery has not been suggested. In this study, we tried to evaluate optimal timing for salvage surgery. Methods and Materials: Patients who were diagnosed with hypopharyngeal squamous cell carcinoma between 2006 and 2015 were retrospectively analyzed. All patients received definitive radiotherapy with or without chemotherapy. Response of all treated patients were analyzed at 1, 3, and 6 months after radiotherapy. Any patients with progression before 6 months were excluded. Results: A total of 54 patients were analyzed. Complete remission (CR) rates at 1 month (CR₁), 3 months (CR₃) and 6 months (CR₆) were 66.7%, 81.5%, and 90.7%, respectively. Non-CR at 1 month (NCR₁), 3 months (NCR₃), and 6 months (NCR₆) showed poor locoregional recurrence-free survival rates (1-year rates of 63.7%, 66.7%, and 0.0%, respectively) compared to CR₁, CR₃, and CR₆ (1-year rates 94.3%, 88.0%, and 91.5%, respectively). Particularly significant differences were seen between CR₆ and NCR₆ (p < 0.001). Of 10 patients with NCR₃, 5 showed CR at 6 months (NCR₃/CR₆). There was no statistical difference in locoregional recurrence-free survival between CR₃ and NCR₃/CR₆ group (p = 0.990). Conclusion: Our data suggest half of patients who did not show CR at 3 months eventually achieved CR at 6 months. Waiting until 6 months after radiotherapy may be appropriate for avoiding additional salvage therapy.

• 공업화학
• /
• 제3권4호
• /
• pp.663-669
• /
• 1992

분말의 $Zr(OH)_4$를 $(NH_4)_2CrO_4$수용액에 함침시킨 후 공기중에 소성하여 질코니아에 담지된 산화크롬 촉매를 제조하였다. 제조된 $CrO_x/ZrO_2$ 촉매상에 cumene을 반응시켜 산화-환원 거동을 연구한 결과 크롬의 산화상태가 +6인 chromate형태로 질코니아 표면에 존재할 때는 강한 산점이 생성되어 cumene의 탈알킬화 반응에 촉매활성을 나타내었다. 그러나 많은 양의 $Cr^{6+}$종은 반응중에 탈수소로 생성된 $H_2$에 의하여 환원되어 $Cr^{3+}$종으로 변환되었으며 $Cr^{3+}$종은 cumene을 탈수소화시켜 ${\alpha}$-methyl styrene을 생성하는 반응에 활성점으로 작용하였다. 환원된 $Cr^{3+}$종은 $O_2$로 처리하면 다시 $Cr^{6+}$종으로 되고 따라서 산화된 촉매는 cumene의 탈알킬화 반응에 활성을 나타내었다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권4호
• /
• pp.138-141
• /
• 2001

The fluorescence emission spectrum of Cr$^{3+}$ doped BeAl$_{6}$ O$_{10}$ crystals at 300 K contains a broad band, three R-like lines and another emission lines. It has been identified by a lifetime resolution spectroscopic technique that there are three kinds of single-Cr$^{3+}$ centers, Cr(I), Cr(II), Cr(III), in this crystal. Cr(I) and Cr(II) are high-crystal field centers responsible for the three main "R-lines", and Cr(III) is a low-crystal field center responsible for the main broad band emission. The structures of these luminescent centers are reported.ted.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1252-1256
• /
• 2009

A simple, selective and sensitive fluorescence quenching method was developed to the determination Cr(VI). The method is based on the oxidation of $I^-\;to\;{{I_3}^-}$ by Cr(VI) in sulfuric acid solution followed by immediate formation of ion association compound between I3 − and rhodamine 6G in Tween-80 micellar media at room temperature. The influence of several surfactants on rhodamine 6G fluorescence signal was studied; particular attention was paid in the aggregation behavior of rhodamine 6G–Tween-80 system. The experimental parameters (e.g., type of surfactant, reagent concentration) were studied and the optimal conditions were established. The linear calibration graph was obtained in the range 2.0 - 100.0 ng m$L^{-1}$ Cr(VI). The detection limit of the method was 0.37 ng m$L^{-1}$. The relative standard deviation (R.S.D.) is less than 5% (n = 5). The efficiency of the method for the determination of Cr(VI) in the presence of Cr(III) in the sample was investigated. The method was applied successfully to the determination of Cr(VI) and total Cr in water, and liver tissue samples.

• 대한화학회지
• /
• 제30권5호
• /
• pp.423-432
• /
• 1986

폐수 중의 6가크롬을 음이온 교환체인 aliquat-336(tri-caprylmethyl ammonium chloride)으로 이온쌍을 형성시켜 유기용매인 p-xylene으로 추출하여 원자흡수분광도법으로 정량하는 방법에 대하여 조사 검토하였다. Toluene을 용매로 사용하여 유기물을 제거한 폐수 100ml를 취하여 염산으로 pH 0.5 되게 산성화시킨 다음 aliquat-336을 0.01M되게 녹인 p-xylene 20ml로 6가크롬을 추출하였다. 표준물첨가법에 의해 air-acetylene 불꽃에서 용매중에 추출된 6가크롬을 정량하였다. Al(III), Fe(III), Cr(III)이온들은 6가크롬의 추출 및 흡광도 측정에 방해 하지 않았으며, Fe(III)이온이 6가크롬을 3가크롬으로 환원시키기 때문이다. 또한 유기물이 존재하면 6가크롬의 흡광도를 감소시키므로 이런 방해유기물을 toluene으로 추출 제거하였다. 최적 조건으로 분석한 결과는 96%이상의 회수율을 보여 주었고 이는 미량 분석에서 정확한 방법이라 할 수 있고, 상대평균편차가 3.95%로서 재현성도 비교적 좋았다.

• Journal of Radiation Protection and Research
• /
• 제16권1호
• /
• pp.15-24
• /
• 1991

CR-39 플라스틱 핵비적검출기를 라돈검출기로 내장한 멤브레인 필터컵(일명 : CR-39 라돈컵)을 이용하여 일부 국산건축자재의 라돈방출율을 측정하였다. 표준라듐선원을 이용한 라돈컵의 교정 실험을 수행하여 얻은 CR-39 검출기의 라돈검출인자는 $0.164{\pm}0.005(tracks \;cm^{-2}/Bq\;d\;m^{-3})$였으며 타 연구자들의 발표결과와 잘 일치하였다. 일부 건축자재(모래벽돌, 적벽돌, 화장석판, 콘크리트 덩어리, 건물바닥과 내벽)에 CR-39 라돈컵을 2개월 동안 기밀 부착하여 라돈방출율을 측정한 결과, 라돈방출율은 모래벽돌에서 평균$(75.0{\pm}5.5){\times}10^{-6}(Bq/m^2-s)$, 화강석판에서 $(6.8{\pm}2.9){\times}10^{-6}Bq/m^2-s)$로 10배정도의 차이를 보였으며, 모래벽돌>콘크리트바닥>콘크리트덩어리>건물벽>적벽돌>화강석 판의 순서를 보였다. 본 연구 결과, CR-39 라돈컵에 의해서도 건축자재의 라돈방출율을 효과적으로 측정할 수 있음이 입증하였다.

• 한국농공학회논문집
• /
• 제55권5호
• /
• pp.17-23
• /
• 2013

Six-valent chromium ($Cr^{6+}$) is a highly toxic pollutant, supplied in a variety of industrial activities such as leather tanning, cooling tower blowdown, and plating. Herein, we investigated the removal of $Cr^{6+}$ from aqueous phase using low-cost adsorbents. Steel slag, montmorillonite, illite, kaolinite, red mud, and acid treated red mud with 0.5, 1.0, and 2.0 M HCl were used as adsorbent for the removal of $Cr^{6+}$ and the results showed that acid treated red mud with 2.0 M HCl (ATRM-2.0 M) had higher adsorption capacity of $Cr^{6+}$ than other adsorbents used. Accordingly, $Cr^{6+}$ removal by ATRM-2.0 M were studied in a batch system with respect to changes in initial concentration of $Cr^{6+}$, initial solution pH, adsorbent dose, adsorbent mixture, and seawater. Equilibrium sorption data were described well by Freundlich isotherm model. The influence of initial solution pH on $Cr^{6+}$ adsorption was insignificant. The use of the ATRM-2.0 M alone was more effective than mixing it with other adsorbents including red mud, zeolite, oyster shell, lime stone, and montmorillonite for the removal of $Cr^{6+}$. The $Cr^{6+}$ removal of the ATRM-2.0 M was slightly less in seawater than deionized water, resulting from the presence of anions in seawater competing for the favorable adsorption site on the surface of ATRM-2.0 M. It was concluded that the ATRM-2.0 M can be used as a potential adsorbent for the removal of $Cr^{6+}$ from the aqueous solutions.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.80-85
• /
• 2004

Chromium-carbon (Cr-C) and chromium-carbon-phosphorus (Cr-C-P) alloy deposits using trivalent chromium sulfate baths containing potassium formate were prepared to study their current efficiency, hardness change and phase transformations behavior with heat treatment, respectively. The current efficiencies of Cr-C and Cr-C-P alloy deposits increase with increasing current density in the range of 15-35 A/dm$^2$. Carbon content of Cr-C and phosphorous of Cr-C-P layers decreases with increasing current density, whereas, the carbon content of Cr-C-P layer is almost constant with the current density. Cr-C deposit shows crystallization at $400^{\circ}C$ and has (Cr+Cr$_{ 23}$$C_{6}$) phases at $800^{\circ}C$. Cr-C-P deposit shows crystallization at $600^{\circ}C$ and has (Cr+Cr$_{23}$ $C_{6}$$+Cr_3$P) phases at $800^{\circ}C$. The hardness of Cr-C and Cr-C-P deposits after heating treatment for one hour increase up to Hv 1640 and Hv 1540 and decrease about Hv 820 and Hv 1270 with increasing annealing temperature in the range of $400～^{\circ}C$, respectively. The hardness change with annealing is due to the order of occurring of chromium crystallization, precipitation hardening effect, softening and grain growth with temperature. Less decrease of hardness of Cr-C-P deposit after annealing above $700^{\circ}C$ is related to continuous precipitation of $Cr_{23}$ $C_{6}$ and $Cr_3$P phases which retard grain growth at the temperature.

• 한국결정학회지
• /
• 제11권2호
• /
• pp.71-74
• /
• 2000

The title compound, [Cr(OC3H6N2)6](NO3)3·4H2O, was crystallized in the centrosymmetric space group P with two half molecules in an asymmetric unit, and the two complete molecules are generated by inversion symmetry located at Cr atoms. Therefore, the Cr atoms are coordinated to six imidazolidone ligands through the oxygen atoms, and both CrO6 units have a slightly distorted octahedral geometry.